Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Stuart Hayes <stuart.w.hayes@gmail.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: Austin Bolen <austin_bolen@dell.com>,
	keith.busch@intel.com, Alexandru Gagniuc <mr.nuke.me@gmail.com>,
	"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	"Gustavo A . R . Silva" <gustavo@embeddedor.com>,
	Sinan Kaya <okaya@kernel.org>,
	Oza Pawandeep <poza@codeaurora.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	lukas@wunner.de
Subject: [PATCH v2 1/3] PCI: pciehp: Add support for disabling in-band presence
Date: Fri, 11 Oct 2019 16:51:25 -0400
Message-ID: <20191011205127.4884-2-stuart.w.hayes@gmail.com> (raw)
In-Reply-To: <20191011205127.4884-1-stuart.w.hayes@gmail.com>

From: Alexandru Gagniuc <mr.nuke.me@gmail.com>

The presence detect state (PDS) is normally a logical or of in-band and
out-of-band presence. As of PCIe 4.0, there is the option to disable
in-band presence so that the PDS bit always reflects the state of the
out-of-band presence.

The recommendation of the PCIe spec is to disable in-band presence
whenever supported.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
---
 drivers/pci/hotplug/pciehp.h     | 1 +
 drivers/pci/hotplug/pciehp_hpc.c | 9 ++++++++-
 include/uapi/linux/pci_regs.h    | 2 ++
 3 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 654c972b8ea0..27e4cd6529b0 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -83,6 +83,7 @@ struct controller {
 	struct pcie_device *pcie;
 
 	u32 slot_cap;				/* capabilities and quirks */
+	unsigned int inband_presence_disabled:1;
 
 	u16 slot_ctrl;				/* control register access */
 	struct mutex ctrl_lock;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 1a522c1c4177..dc109d521f30 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -811,7 +811,7 @@ static inline void dbg_ctrl(struct controller *ctrl)
 struct controller *pcie_init(struct pcie_device *dev)
 {
 	struct controller *ctrl;
-	u32 slot_cap, link_cap;
+	u32 slot_cap, slot_cap2, link_cap;
 	u8 poweron;
 	struct pci_dev *pdev = dev->port;
 	struct pci_bus *subordinate = pdev->subordinate;
@@ -869,6 +869,13 @@ struct controller *pcie_init(struct pcie_device *dev)
 		FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC),
 		pdev->broken_cmd_compl ? " (with Cmd Compl erratum)" : "");
 
+	pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP2, &slot_cap2);
+	if (slot_cap2 & PCI_EXP_SLTCAP2_IBPD) {
+		pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_IBPD_DISABLE,
+				      PCI_EXP_SLTCTL_IBPD_DISABLE);
+		ctrl->inband_presence_disabled = 1;
+	}
+
 	/*
 	 * If empty slot's power status is on, turn power off.  The IRQ isn't
 	 * requested yet, so avoid triggering a notification with this command.
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 29d6e93fd15e..ea1cf9546e4d 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -604,6 +604,7 @@
 #define  PCI_EXP_SLTCTL_PWR_OFF        0x0400 /* Power Off */
 #define  PCI_EXP_SLTCTL_EIC	0x0800	/* Electromechanical Interlock Control */
 #define  PCI_EXP_SLTCTL_DLLSCE	0x1000	/* Data Link Layer State Changed Enable */
+#define  PCI_EXP_SLTCTL_IBPD_DISABLE	0x4000 /* In-band PD disable */
 #define PCI_EXP_SLTSTA		26	/* Slot Status */
 #define  PCI_EXP_SLTSTA_ABP	0x0001	/* Attention Button Pressed */
 #define  PCI_EXP_SLTSTA_PFD	0x0002	/* Power Fault Detected */
@@ -676,6 +677,7 @@
 #define PCI_EXP_LNKSTA2		50	/* Link Status 2 */
 #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	52	/* v2 endpoints with link end here */
 #define PCI_EXP_SLTCAP2		52	/* Slot Capabilities 2 */
+#define  PCI_EXP_SLTCAP2_IBPD	0x0001	/* In-band PD Disable Supported */
 #define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
 #define PCI_EXP_SLTSTA2		58	/* Slot Status 2 */
 
-- 
2.18.1


  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-11 20:51 [PATCH v2 0/3] PCI: pciehp: Do not turn off slot if presence comes up after link Stuart Hayes
2019-10-11 20:51 ` Stuart Hayes [this message]
2019-10-11 20:51 ` [PATCH v2 2/3] PCI: pciehp: Wait for PDS if in-band presence is disabled Stuart Hayes
2019-10-12  7:34   ` Andy Shevchenko
2019-10-11 20:51 ` [PATCH v2 3/3] PCI: pciehp: Add dmi table for in-band presence disabled Stuart Hayes

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191011205127.4884-2-stuart.w.hayes@gmail.com \
    --to=stuart.w.hayes@gmail.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=austin_bolen@dell.com \
    --cc=bhelgaas@google.com \
    --cc=gustavo@embeddedor.com \
    --cc=keith.busch@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=mika.westerberg@linux.intel.com \
    --cc=mr.nuke.me@gmail.com \
    --cc=okaya@kernel.org \
    --cc=poza@codeaurora.org \
    --cc=rafael.j.wysocki@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org linux-pci@archiver.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/ public-inbox