From: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
To: <linux-pci@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>, <linux@yadro.com>,
Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
Subject: [PATCH v6 14/30] PCI: Make sure bridge windows include their fixed BARs
Date: Thu, 24 Oct 2019 20:12:12 +0300 [thread overview]
Message-ID: <20191024171228.877974-15-s.miroshnichenko@yadro.com> (raw)
In-Reply-To: <20191024171228.877974-1-s.miroshnichenko@yadro.com>
When the time comes to select a start address for the bridge window during
the root bus rescan, it should be not just a lowest possible address: this
window must cover all the underlying fixed and immovable BARs. The lowest
address that satisfies this requirement is the .realloc_range field of
struct pci_bus, which is calculated during the preparation to the rescan.
Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
---
drivers/pci/bus.c | 2 +-
drivers/pci/setup-res.c | 31 +++++++++++++++++++++++++++++--
2 files changed, 30 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 8e40b3e6da77..a1efa87e31b9 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -192,7 +192,7 @@ static int pci_bus_alloc_from_region(struct pci_bus *bus, struct resource *res,
* this is an already-configured bridge window, its start
* overrides "min".
*/
- if (avail.start)
+ if (min_used < avail.start)
min_used = avail.start;
max = avail.end;
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index a1657a8bf93d..1570bbd620cd 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -248,9 +248,23 @@ static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
struct resource *res = dev->resource + resno;
resource_size_t min;
int ret;
+ resource_size_t start = (resource_size_t)-1;
+ resource_size_t end = 0;
min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM;
+ if (dev->subordinate && resno >= PCI_BRIDGE_RESOURCES) {
+ struct pci_bus *child_bus = dev->subordinate;
+ int b_resno = resno - PCI_BRIDGE_RESOURCES;
+ struct resource *immovable_range = &child_bus->immovable_range[b_resno];
+
+ if (immovable_range->start < immovable_range->end) {
+ start = immovable_range->start;
+ end = immovable_range->end;
+ min = child_bus->realloc_range[b_resno].start;
+ }
+ }
+
/*
* First, try exact prefetching match. Even if a 64-bit
* prefetchable bridge window is below 4GB, we can't put a 32-bit
@@ -262,7 +276,7 @@ static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
IORESOURCE_PREFETCH | IORESOURCE_MEM_64,
pcibios_align_resource, dev);
if (ret == 0)
- return 0;
+ goto check_fixed;
/*
* If the prefetchable window is only 32 bits wide, we can put
@@ -274,7 +288,7 @@ static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
IORESOURCE_PREFETCH,
pcibios_align_resource, dev);
if (ret == 0)
- return 0;
+ goto check_fixed;
}
/*
@@ -287,6 +301,19 @@ static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
ret = pci_bus_alloc_resource(bus, res, size, align, min, 0,
pcibios_align_resource, dev);
+check_fixed:
+ if (ret == 0 && start < end) {
+ if (res->start > start || res->end < end) {
+ dev_err(&bus->dev, "fixed area 0x%llx-0x%llx for %s doesn't fit in the allocated %pR (0x%llx-0x%llx)",
+ (unsigned long long)start, (unsigned long long)end,
+ dev_name(&dev->dev),
+ res, (unsigned long long)res->start,
+ (unsigned long long)res->end);
+ release_resource(res);
+ return -1;
+ }
+ }
+
return ret;
}
--
2.23.0
next prev parent reply other threads:[~2019-10-24 17:12 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-24 17:11 [PATCH v6 00/30] PCI: Allow BAR movement during hotplug Sergey Miroshnichenko
2019-10-24 17:11 ` [PATCH v6 01/30] PCI: Fix race condition in pci_enable/disable_device() Sergey Miroshnichenko
2019-10-25 14:33 ` Oxford Semiconductor Ltd OX16PCI954 - weird dmesg Carlo Pisani
2019-10-25 16:37 ` Bjorn Helgaas
2019-10-24 17:12 ` [PATCH v6 02/30] PCI: Enable bridge's I/O and MEM access for hotplugged devices Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 03/30] PCI: hotplug: Add a flag for the movable BARs feature Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 04/30] PCI: Define PCI-specific version of the release_child_resources() Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 05/30] PCI: hotplug: movable BARs: Fix reassigning the released bridge windows Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 06/30] PCI: hotplug: movable BARs: Recalculate all bridge windows during rescan Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 07/30] PCI: hotplug: movable BARs: Don't disable the released bridge windows Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 08/30] PCI: hotplug: movable BARs: Don't allow added devices to steal resources Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 09/30] PCI: Include fixed and immovable BARs into the bus size calculating Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 10/30] PCI: Prohibit assigning BARs and bridge windows to non-direct parents Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 11/30] PCI: hotplug: movable BARs: Try to assign unassigned resources only once Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 12/30] PCI: hotplug: movable BARs: Calculate immovable parts of bridge windows Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 13/30] PCI: hotplug: movable BARs: Compute limits for relocated " Sergey Miroshnichenko
2019-10-24 17:12 ` Sergey Miroshnichenko [this message]
2019-10-24 17:12 ` [PATCH v6 15/30] PCI: Fix assigning the fixed prefetchable resources Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 16/30] PCI: hotplug: movable BARs: Assign fixed and immovable BARs before others Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 17/30] PCI: hotplug: movable BARs: Don't reserve IO/mem bus space Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 18/30] PCI: hotplug: Configure MPS for hot-added bridges during bus rescan Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 19/30] PCI: hotplug: movable BARs: Ignore the MEM BAR offsets from bootloader Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 20/30] powerpc/pci: Fix crash with enabled movable BARs Sergey Miroshnichenko
2019-10-25 1:22 ` Alexey Kardashevskiy
2019-10-24 17:12 ` [PATCH v6 21/30] powerpc/pci: Access PCI config space directly w/o pci_dn Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 22/30] powerpc/pci: Create pci_dn on demand Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 23/30] powerpc/pci: hotplug: Add support for movable BARs Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 24/30] powerpc/powernv/pci: Suppress an EEH error when reading an empty slot Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 25/30] PNP: Don't reserve BARs for PCI when enabled movable BARs Sergey Miroshnichenko
2019-10-27 17:40 ` kbuild test robot
2019-10-24 17:12 ` [PATCH v6 26/30] PCI: hotplug: movable BARs: Enable the feature by default Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 27/30] nvme-pci: Handle movable BARs Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 28/30] PCI/portdrv: Declare support of " Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 29/30] PCI: pciehp: movable BARs: Trigger a domain rescan on hp events Sergey Miroshnichenko
2019-10-24 17:12 ` [PATCH v6 30/30] Revert "powerpc/powernv/pci: Work around races in PCI bridge enabling" Sergey Miroshnichenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191024171228.877974-15-s.miroshnichenko@yadro.com \
--to=s.miroshnichenko@yadro.com \
--cc=helgaas@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@yadro.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).