linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Andrew Murray <andrew.murray@arm.com>
Cc: <linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>
Subject: [PATCH 04/13] PCI: cadence: Add support to start link and verify link status
Date: Mon, 9 Dec 2019 14:51:38 +0530	[thread overview]
Message-ID: <20191209092147.22901-5-kishon@ti.com> (raw)
In-Reply-To: <20191209092147.22901-1-kishon@ti.com>

Add cdns_pcie_ops to start link and verify link status. The registers
to start link and to check link status is in Platform specific PCIe
wrapper. Add support for platform specific drivers to add callback
functions for the PCIe Cadence core to start link and verify link status.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../pci/controller/cadence/pcie-cadence-ep.c  |  8 ++++++
 .../controller/cadence/pcie-cadence-host.c    | 28 +++++++++++++++++++
 drivers/pci/controller/cadence/pcie-cadence.h | 23 +++++++++++++++
 3 files changed, 59 insertions(+)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c
index 560f22b4d165..088394b6be04 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-ep.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c
@@ -355,8 +355,10 @@ static int cdns_pcie_ep_start(struct pci_epc *epc)
 {
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
 	struct cdns_pcie *pcie = &ep->pcie;
+	struct device *dev = pcie->dev;
 	struct pci_epf *epf;
 	u32 cfg;
+	int ret;
 
 	/*
 	 * BIT(0) is hardwired to 1, hence function 0 is always enabled
@@ -367,6 +369,12 @@ static int cdns_pcie_ep_start(struct pci_epc *epc)
 		cfg |= BIT(epf->func_no);
 	cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, cfg);
 
+	ret = cdns_pcie_start_link(pcie, true);
+	if (ret) {
+		dev_err(dev, "Failed to start link\n");
+		return ret;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index ccf55e143e1d..0929554f5a81 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -3,6 +3,7 @@
 // Cadence PCIe host controller driver.
 // Author: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
 
+#include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
@@ -201,6 +202,23 @@ static int cdns_pcie_host_init(struct device *dev,
 	return err;
 }
 
+static int cdns_pcie_host_wait_for_link(struct cdns_pcie *pcie)
+{
+	struct device *dev = pcie->dev;
+	int retries;
+
+	/* Check if the link is up or not */
+	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+		if (cdns_pcie_is_link_up(pcie)) {
+			dev_info(dev, "Link up\n");
+			return 0;
+		}
+		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+	}
+
+	return -ETIMEDOUT;
+}
+
 int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 {
 	struct device *dev = rc->pcie.dev;
@@ -254,6 +272,16 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 
 	pcie->mem_res = res;
 
+	ret = cdns_pcie_start_link(pcie, true);
+	if (ret) {
+		dev_err(dev, "Failed to start link\n");
+		return ret;
+	}
+
+	ret = cdns_pcie_host_wait_for_link(pcie);
+	if (ret)
+		dev_dbg(dev, "PCIe link never came up\n");
+
 	ret = cdns_pcie_host_init(dev, &resources, rc);
 	if (ret)
 		goto err_init;
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index d0d91c69fa1d..f0395eaf9df5 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -10,6 +10,11 @@
 #include <linux/pci.h>
 #include <linux/phy/phy.h>
 
+/* Parameters for the waiting for link up routine */
+#define LINK_WAIT_MAX_RETRIES	10
+#define LINK_WAIT_USLEEP_MIN	90000
+#define LINK_WAIT_USLEEP_MAX	100000
+
 /*
  * Local Management Registers
  */
@@ -226,6 +231,8 @@ enum cdns_pcie_msg_routing {
 struct cdns_pcie_ops {
 	u32	(*read)(void __iomem *addr, int size);
 	void	(*write)(void __iomem *addr, int size, u32 value);
+	int	(*start_link)(struct cdns_pcie *pcie, bool start);
+	bool	(*is_link_up)(struct cdns_pcie *pcie);
 };
 
 /**
@@ -447,6 +454,22 @@ static inline u32 cdns_pcie_ep_fn_readl(struct cdns_pcie *pcie, u8 fn, u32 reg)
 	return readl(addr);
 }
 
+static inline int cdns_pcie_start_link(struct cdns_pcie *pcie, bool start)
+{
+	if (pcie->ops->start_link)
+		return pcie->ops->start_link(pcie, start);
+
+	return 0;
+}
+
+static inline bool cdns_pcie_is_link_up(struct cdns_pcie *pcie)
+{
+	if (pcie->ops->is_link_up)
+		return pcie->ops->is_link_up(pcie);
+
+	return true;
+}
+
 #ifdef CONFIG_PCIE_CADENCE_HOST
 int cdns_pcie_host_setup(struct cdns_pcie_rc *rc);
 #else
-- 
2.17.1


  parent reply	other threads:[~2019-12-09  9:21 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-09  9:21 [PATCH 00/13] Add PCIe support to TI's J721E SoC Kishon Vijay Abraham I
2019-12-09  9:21 ` [PATCH 01/13] PCI: cadence: Remove stray "pm_runtime_put_sync()" in error path Kishon Vijay Abraham I
2019-12-16 13:45   ` Andrew Murray
2019-12-19  8:31     ` Kishon Vijay Abraham I
2019-12-09  9:21 ` [PATCH 02/13] linux/kernel.h: Add PTR_ALIGN_DOWN macro Kishon Vijay Abraham I
2019-12-09  9:21 ` [PATCH 03/13] PCI: cadence: Add support to use custom read and write accessors Kishon Vijay Abraham I
2019-12-16 14:07   ` Andrew Murray
2019-12-19 11:41     ` Kishon Vijay Abraham I
2019-12-09  9:21 ` Kishon Vijay Abraham I [this message]
2019-12-17 11:58   ` [PATCH 04/13] PCI: cadence: Add support to start link and verify link status Andrew Murray
2019-12-19 12:01     ` Kishon Vijay Abraham I
2019-12-09  9:21 ` [PATCH 05/13] PCI: cadence: Add read and write accessors to perform only 32-bit accesses Kishon Vijay Abraham I
2019-12-09 21:15   ` Bjorn Helgaas
2019-12-16 14:49   ` Andrew Murray
2019-12-19 11:56     ` Kishon Vijay Abraham I
2019-12-19 12:03       ` Arnd Bergmann
2019-12-19 13:19         ` Kishon Vijay Abraham I
2019-12-19 20:16           ` Arnd Bergmann
2019-12-17 23:36   ` Bjorn Helgaas
2019-12-19 12:49     ` Kishon Vijay Abraham I
2019-12-09  9:21 ` [PATCH 06/13] PCI: cadence: Allow pci_host_bridge to have custom pci_ops Kishon Vijay Abraham I
2019-12-17 12:32   ` Andrew Murray
2019-12-19 12:02     ` Kishon Vijay Abraham I
2019-12-09  9:21 ` [PATCH 07/13] PCI: cadence: Add new *ops* for CPU addr fixup Kishon Vijay Abraham I
2019-12-17 12:40   ` Andrew Murray
2019-12-19 12:03     ` Kishon Vijay Abraham I
2019-12-09  9:21 ` [PATCH 08/13] PCI: cadence: Use local management register to configure Vendor ID Kishon Vijay Abraham I
2019-12-17 12:42   ` Andrew Murray
2019-12-19 12:12     ` Kishon Vijay Abraham I
2019-12-09  9:21 ` [PATCH 09/13] dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC Kishon Vijay Abraham I
2019-12-19  0:08   ` Rob Herring
2019-12-19 13:13     ` Kishon Vijay Abraham I
2019-12-24  8:06     ` Kishon Vijay Abraham I
2019-12-09  9:21 ` [PATCH 10/13] dt-bindings: PCI: Add EP " Kishon Vijay Abraham I
2019-12-19  0:14   ` Rob Herring
2019-12-19 13:14     ` Kishon Vijay Abraham I
2019-12-09  9:21 ` [PATCH 11/13] PCI: j721e: Add TI J721E PCIe driver Kishon Vijay Abraham I
2019-12-17 14:23   ` Andrew Murray
2019-12-19 22:47   ` Bjorn Helgaas
2019-12-09  9:21 ` [PATCH 12/13] misc: pci_endpoint_test: Add J721E in pci_device_id table Kishon Vijay Abraham I
2019-12-09  9:21 ` [PATCH 13/13] MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191209092147.22901-5-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=andrew.murray@arm.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).