From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>,
Andrew Murray <andrew.murray@arm.com>,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2] PCI: uniphier: remove module code from built-in driver
Date: Mon, 16 Dec 2019 07:39:37 +0900 [thread overview]
Message-ID: <20191215223937.19619-1-yamada.masahiro@socionext.com> (raw)
builtin_platform_driver() and MODULE_* are always odd combination.
This file is not compiled as a module by anyone because
CONFIG_PCIE_UNIPHIER is a bool option.
Let's remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove" code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
Changes in v2:
- update commit description
- remove Reviewed-by
drivers/pci/controller/dwc/pcie-uniphier.c | 31 +---------------------
1 file changed, 1 insertion(+), 30 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
index 8fd7badd59c2..a5401a0b1e58 100644
--- a/drivers/pci/controller/dwc/pcie-uniphier.c
+++ b/drivers/pci/controller/dwc/pcie-uniphier.c
@@ -9,11 +9,11 @@
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/iopoll.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/irqdomain.h>
-#include <linux/module.h>
#include <linux/of_irq.h>
#include <linux/pci.h>
#include <linux/phy/phy.h>
@@ -171,12 +171,6 @@ static void uniphier_pcie_irq_enable(struct uniphier_pcie_priv *priv)
writel(PCL_RCV_INTX_ALL_ENABLE, priv->base + PCL_RCV_INTX);
}
-static void uniphier_pcie_irq_disable(struct uniphier_pcie_priv *priv)
-{
- writel(0, priv->base + PCL_RCV_INT);
- writel(0, priv->base + PCL_RCV_INTX);
-}
-
static void uniphier_pcie_irq_ack(struct irq_data *d)
{
struct pcie_port *pp = irq_data_get_irq_chip_data(d);
@@ -397,14 +391,6 @@ static int uniphier_pcie_host_enable(struct uniphier_pcie_priv *priv)
return ret;
}
-static void uniphier_pcie_host_disable(struct uniphier_pcie_priv *priv)
-{
- uniphier_pcie_irq_disable(priv);
- phy_exit(priv->phy);
- reset_control_assert(priv->rst);
- clk_disable_unprepare(priv->clk);
-}
-
static const struct dw_pcie_ops dw_pcie_ops = {
.start_link = uniphier_pcie_establish_link,
.stop_link = uniphier_pcie_stop_link,
@@ -456,31 +442,16 @@ static int uniphier_pcie_probe(struct platform_device *pdev)
return uniphier_add_pcie_port(priv, pdev);
}
-static int uniphier_pcie_remove(struct platform_device *pdev)
-{
- struct uniphier_pcie_priv *priv = platform_get_drvdata(pdev);
-
- uniphier_pcie_host_disable(priv);
-
- return 0;
-}
-
static const struct of_device_id uniphier_pcie_match[] = {
{ .compatible = "socionext,uniphier-pcie", },
{ /* sentinel */ },
};
-MODULE_DEVICE_TABLE(of, uniphier_pcie_match);
static struct platform_driver uniphier_pcie_driver = {
.probe = uniphier_pcie_probe,
- .remove = uniphier_pcie_remove,
.driver = {
.name = "uniphier-pcie",
.of_match_table = uniphier_pcie_match,
},
};
builtin_platform_driver(uniphier_pcie_driver);
-
-MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
-MODULE_DESCRIPTION("UniPhier PCIe host controller driver");
-MODULE_LICENSE("GPL v2");
--
2.17.1
next reply other threads:[~2019-12-15 22:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-15 22:39 Masahiro Yamada [this message]
2020-01-06 12:55 ` [PATCH v2] PCI: uniphier: remove module code from built-in driver Andrew Murray
2020-01-13 16:43 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191215223937.19619-1-yamada.masahiro@socionext.com \
--to=yamada.masahiro@socionext.com \
--cc=andrew.murray@arm.com \
--cc=bhelgaas@google.com \
--cc=hayashi.kunihiko@socionext.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=p.zabel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).