From: Sergei Miroshnichenko <s.miroshnichenko@yadro.com>
To: <linux-pci@vger.kernel.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>, Stefan Roese <sr@denx.de>,
<linux@yadro.com>,
Sergei Miroshnichenko <s.miroshnichenko@yadro.com>,
"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Subject: [PATCH v7 20/26] PNP: Don't reserve BARs for PCI when enabled movable BARs
Date: Wed, 29 Jan 2020 18:29:31 +0300 [thread overview]
Message-ID: <20200129152937.311162-21-s.miroshnichenko@yadro.com> (raw)
In-Reply-To: <20200129152937.311162-1-s.miroshnichenko@yadro.com>
When the Movable BARs feature is supported, the PCI subsystem is able to
distribute existing BARs and allocate the new ones itself, without need to
reserve gaps by BIOS.
CC: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sergei Miroshnichenko <s.miroshnichenko@yadro.com>
---
drivers/pnp/system.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c
index 6950503741eb..16cd260a609d 100644
--- a/drivers/pnp/system.c
+++ b/drivers/pnp/system.c
@@ -12,6 +12,7 @@
#include <linux/device.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
@@ -58,6 +59,11 @@ static void reserve_resources_of_dev(struct pnp_dev *dev)
struct resource *res;
int i;
+#ifdef CONFIG_PCI
+ if (pci_can_move_bars)
+ return;
+#endif
+
for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_IO, i)); i++) {
if (res->flags & IORESOURCE_DISABLED)
continue;
--
2.24.1
next prev parent reply other threads:[~2020-01-29 15:30 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-29 15:29 [PATCH v7 00/26] PCI: Allow BAR movement during boot and hotplug Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 01/26] PCI: Fix race condition in pci_enable/disable_device() Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 02/26] PCI: Enable bridge's I/O and MEM access for hotplugged devices Sergei Miroshnichenko
2020-01-30 23:12 ` Bjorn Helgaas
2020-01-29 15:29 ` [PATCH v7 03/26] PCI: hotplug: Initial support of the movable BARs feature Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 04/26] PCI: Add version of release_child_resources() aware of immovable BARs Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 05/26] PCI: hotplug: Fix reassigning the released BARs Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 06/26] PCI: hotplug: Recalculate every bridge window during rescan Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 07/26] PCI: hotplug: Don't allow hot-added devices to steal resources Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 08/26] PCI: hotplug: Try to reassign movable BARs only once Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 09/26] PCI: hotplug: Calculate immovable parts of bridge windows Sergei Miroshnichenko
2020-01-30 21:26 ` Bjorn Helgaas
2020-01-31 16:59 ` Sergei Miroshnichenko
2020-01-31 20:10 ` Bjorn Helgaas
2020-01-29 15:29 ` [PATCH v7 10/26] PCI: Include fixed and immovable BARs into the bus size calculating Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 11/26] PCI: hotplug: movable BARs: Compute limits for relocated bridge windows Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 12/26] PCI: Make sure bridge windows include their fixed BARs Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 13/26] PCI: hotplug: Add support of immovable BARs to pci_assign_resource() Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 14/26] PCI: hotplug: Sort immovable BARs before assignment Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 15/26] PCI: hotplug: Enable the movable BARs feature by default Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 16/26] PCI: Ignore PCIBIOS_MIN_MEM Sergei Miroshnichenko
2020-01-30 23:52 ` Bjorn Helgaas
2020-01-31 18:19 ` Sergei Miroshnichenko
2020-01-31 20:27 ` Bjorn Helgaas
2020-02-05 13:04 ` Sergei Miroshnichenko
2020-02-05 16:32 ` Bjorn Helgaas
2020-02-12 12:16 ` Sergei Miroshnichenko
2020-02-12 14:13 ` Bjorn Helgaas
2020-01-29 15:29 ` [PATCH v7 17/26] PCI: hotplug: Ignore the MEM BAR offsets from BIOS/bootloader Sergei Miroshnichenko
2020-01-31 20:31 ` Bjorn Helgaas
2020-02-05 11:01 ` Sergei Miroshnichenko
2020-02-05 16:42 ` Bjorn Helgaas
2020-02-12 12:29 ` Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 18/26] PCI: Treat VGA BARs as immovable Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 19/26] PCI: hotplug: Configure MPS for hot-added bridges during bus rescan Sergei Miroshnichenko
2020-01-29 15:29 ` Sergei Miroshnichenko [this message]
2020-01-30 14:39 ` [PATCH v7 20/26] PNP: Don't reserve BARs for PCI when enabled movable BARs Rafael J. Wysocki
2020-01-30 21:14 ` Bjorn Helgaas
2020-01-31 15:48 ` Sergei Miroshnichenko
2020-01-31 19:39 ` Bjorn Helgaas
2020-01-29 15:29 ` [PATCH v7 21/26] PCI: hotplug: Don't disable the released bridge windows immediately Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 22/26] PCI: pciehp: Trigger a domain rescan on hp events when enabled movable BARs Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 23/26] PCI: Don't claim immovable BARs Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 24/26] PCI: hotplug: Don't reserve bus space when enabled movable BARs Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 25/26] nvme-pci: Handle " Sergei Miroshnichenko
2020-01-29 15:29 ` [PATCH v7 26/26] PCI/portdrv: Declare support of " Sergei Miroshnichenko
2020-01-30 23:37 ` [PATCH v7 00/26] PCI: Allow BAR movement during boot and hotplug Bjorn Helgaas
2020-02-03 4:56 ` Oliver O'Halloran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200129152937.311162-21-s.miroshnichenko@yadro.com \
--to=s.miroshnichenko@yadro.com \
--cc=helgaas@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@yadro.com \
--cc=rafael.j.wysocki@intel.com \
--cc=sr@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).