[PATCH AUTOSEL 5.5 028/542] PCI: Fix pci_add_dma_alias() bitmask size

[PATCH AUTOSEL 5.5 028/542] PCI: Fix pci_add_dma_alias() bitmask size

[Sasha Levin]

From: James Sewart <jamessewart@arista.com>

[ Upstream commit f8bf2aeb651b3460a4b36fd7ba1ba1d31777d35c ]

The number of possible devfns is 256, but pci_add_dma_alias() allocated a
bitmap of size 255.  Fix this off-by-one error.

This fixes commits 338c3149a221 ("PCI: Add support for multiple DMA
aliases") and c6635792737b ("PCI: Allocate dma_alias_mask with
bitmap_zalloc()"), but I doubt it was possible to see a problem because
it takes 4 64-bit longs (or 8 32-bit longs) to hold 255 bits, and
bitmap_zalloc() doesn't save the 255-bit size anywhere.

[bhelgaas: commit log, move #define to drivers/pci/pci.h, include loop
limit fix from Qian Cai:
https://lore.kernel.org/r/20191218170004.5297-1-cai@lca.pw]
Signed-off-by: James Sewart <jamessewart@arista.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c    | 2 +-
 drivers/pci/pci.h    | 3 +++
 drivers/pci/search.c | 4 ++--
 3 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e87196cc1a7fb..7b5fa2eabe095 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -6017,7 +6017,7 @@ EXPORT_SYMBOL_GPL(pci_pr3_present);
 void pci_add_dma_alias(struct pci_dev *dev, u8 devfn)
 {
 	if (!dev->dma_alias_mask)
-		dev->dma_alias_mask = bitmap_zalloc(U8_MAX, GFP_KERNEL);
+		dev->dma_alias_mask = bitmap_zalloc(MAX_NR_DEVFNS, GFP_KERNEL);
 	if (!dev->dma_alias_mask) {
 		pci_warn(dev, "Unable to allocate DMA alias mask\n");
 		return;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a0a53bd05a0b8..6394e7746fb54 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -4,6 +4,9 @@
 
 #include <linux/pci.h>
 
+/* Number of possible devfns: 0.0 to 1f.7 inclusive */
+#define MAX_NR_DEVFNS 256
+
 #define PCI_FIND_CAP_TTL	48
 
 #define PCI_VSEC_ID_INTEL_TBT	0x1234	/* Thunderbolt */
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index bade14002fd8a..e4dbdef5aef05 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -41,9 +41,9 @@ int pci_for_each_dma_alias(struct pci_dev *pdev,
 	 * DMA, iterate over that too.
 	 */
 	if (unlikely(pdev->dma_alias_mask)) {
-		u8 devfn;
+		unsigned int devfn;
 
-		for_each_set_bit(devfn, pdev->dma_alias_mask, U8_MAX) {
+		for_each_set_bit(devfn, pdev->dma_alias_mask, MAX_NR_DEVFNS) {
 			ret = fn(pdev, PCI_DEVID(pdev->bus->number, devfn),
 				 data);
 			if (ret)
-- 
2.20.1

[PATCH AUTOSEL 5.5 058/542] PCI/switchtec: Fix vep_vector_number ioread width

[Sasha Levin]

From: Logan Gunthorpe <logang@deltatee.com>

[ Upstream commit 9375646b4cf03aee81bc6c305aa18cc80b682796 ]

vep_vector_number is actually a 16 bit register which should be read with
ioread16() instead of ioread32().

Fixes: 080b47def5e5 ("MicroSemi Switchtec management interface driver")
Link: https://lore.kernel.org/r/20200106190337.2428-3-logang@deltatee.com
Reported-by: Doug Meyer <dmeyer@gigaio.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/switch/switchtec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index 88091bbfe77f2..29412451f9e1f 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -1276,7 +1276,7 @@ static int switchtec_init_isr(struct switchtec_dev *stdev)
 	if (nvecs < 0)
 		return nvecs;
 
-	event_irq = ioread32(&stdev->mmio_part_cfg->vep_vector_number);
+	event_irq = ioread16(&stdev->mmio_part_cfg->vep_vector_number);
 	if (event_irq < 0 || event_irq >= nvecs)
 		return -EFAULT;
 
-- 
2.20.1

[PATCH AUTOSEL 5.5 062/542] PCI: tegra: Fix afi_pex2_ctrl reg offset for Tegra30

[Sasha Levin]

From: Marcel Ziswiler <marcel@ziswiler.com>

[ Upstream commit 21a92676e1fe292acb077b13106b08c22ed36b14 ]

Fix AFI_PEX2_CTRL reg offset for Tegra30 by moving it from the Tegra20
SoC struct where it erroneously got added. This fixes the AFI_PEX2_CTRL
reg offset being uninitialised subsequently failing to bring up the
third PCIe port.

Fixes: adb2653b3d2e ("PCI: tegra: Add AFI_PEX2_CTRL reg offset as part of SoC struct")
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-tegra.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 090b632965e21..ac93f5a0398e4 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -2499,7 +2499,6 @@ static const struct tegra_pcie_soc tegra20_pcie = {
 	.num_ports = 2,
 	.ports = tegra20_pcie_ports,
 	.msi_base_shift = 0,
-	.afi_pex2_ctrl = 0x128,
 	.pads_pll_ctl = PADS_PLL_CTL_TEGRA20,
 	.tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10,
 	.pads_refclk_cfg0 = 0xfa5cfa5c,
@@ -2528,6 +2527,7 @@ static const struct tegra_pcie_soc tegra30_pcie = {
 	.num_ports = 3,
 	.ports = tegra30_pcie_ports,
 	.msi_base_shift = 8,
+	.afi_pex2_ctrl = 0x128,
 	.pads_pll_ctl = PADS_PLL_CTL_TEGRA30,
 	.tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN,
 	.pads_refclk_cfg0 = 0xfa5cfa5c,
-- 
2.20.1

[PATCH AUTOSEL 5.5 178/542] PCI/IOV: Fix memory leak in pci_iov_add_virtfn()

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit 8c386cc817878588195dde38e919aa6ba9409d58 ]

In the implementation of pci_iov_add_virtfn() the allocated virtfn is
leaked if pci_setup_device() fails. The error handling is not calling
pci_stop_and_remove_bus_device(). Change the goto label to failed2.

Fixes: 156c55325d30 ("PCI: Check for pci_setup_device() failure in pci_iov_add_virtfn()")
Link: https://lore.kernel.org/r/20191125195255.23740-1-navid.emamdoost@gmail.com
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/iov.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 1e88fd4277578..4d1f392b05f9a 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -186,10 +186,10 @@ int pci_iov_add_virtfn(struct pci_dev *dev, int id)
 	sprintf(buf, "virtfn%u", id);
 	rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf);
 	if (rc)
-		goto failed2;
+		goto failed1;
 	rc = sysfs_create_link(&virtfn->dev.kobj, &dev->dev.kobj, "physfn");
 	if (rc)
-		goto failed3;
+		goto failed2;
 
 	kobject_uevent(&virtfn->dev.kobj, KOBJ_CHANGE);
 
@@ -197,11 +197,10 @@ int pci_iov_add_virtfn(struct pci_dev *dev, int id)
 
 	return 0;
 
-failed3:
-	sysfs_remove_link(&dev->dev.kobj, buf);
 failed2:
-	pci_stop_and_remove_bus_device(virtfn);
+	sysfs_remove_link(&dev->dev.kobj, buf);
 failed1:
+	pci_stop_and_remove_bus_device(virtfn);
 	pci_dev_put(dev);
 failed0:
 	virtfn_remove_bus(dev->bus, bus);
-- 
2.20.1

[PATCH AUTOSEL 5.5 203/542] PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in

[Sasha Levin]

From: Wei Liu <wei.liu@kernel.org>

[ Upstream commit 574f29036fce385e28617547955dd6911d375025 ]

Previously quirk_paxc_bridge() was applied when the iproc driver was
built-in, but not when it was compiled as a module.

This happened because it was under #ifdef CONFIG_PCIE_IPROC_PLATFORM:
PCIE_IPROC_PLATFORM=y causes CONFIG_PCIE_IPROC_PLATFORM to be defined, but
PCIE_IPROC_PLATFORM=m causes CONFIG_PCIE_IPROC_PLATFORM_MODULE to be
defined.

Move quirk_paxc_bridge() to pcie-iproc.c and drop the #ifdef so the quirk
is always applied, whether iproc is built-in or a module.

[bhelgaas: commit log, move to pcie-iproc.c, not pcie-iproc-platform.c]
Link: https://lore.kernel.org/r/20191211174511.89713-1-wei.liu@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-iproc.c | 24 ++++++++++++++++++++++++
 drivers/pci/quirks.c                | 26 --------------------------
 2 files changed, 24 insertions(+), 26 deletions(-)

diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index 0a468c73bae38..8c7f875acf7fa 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -1588,6 +1588,30 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802,
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804,
 			quirk_paxc_disable_msi_parsing);
 
+static void quirk_paxc_bridge(struct pci_dev *pdev)
+{
+	/*
+	 * The PCI config space is shared with the PAXC root port and the first
+	 * Ethernet device.  So, we need to workaround this by telling the PCI
+	 * code that the bridge is not an Ethernet device.
+	 */
+	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+		pdev->class = PCI_CLASS_BRIDGE_PCI << 8;
+
+	/*
+	 * MPSS is not being set properly (as it is currently 0).  This is
+	 * because that area of the PCI config space is hard coded to zero, and
+	 * is not modifiable by firmware.  Set this to 2 (e.g., 512 byte MPS)
+	 * so that the MPS can be set to the real max value.
+	 */
+	pdev->pcie_mpss = 2;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd750, quirk_paxc_bridge);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802, quirk_paxc_bridge);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804, quirk_paxc_bridge);
+
 MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
 MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index fbeb9f73ef280..5cd6a77ddefff 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2381,32 +2381,6 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM,
 			 PCI_DEVICE_ID_TIGON3_5719,
 			 quirk_brcm_5719_limit_mrrs);
 
-#ifdef CONFIG_PCIE_IPROC_PLATFORM
-static void quirk_paxc_bridge(struct pci_dev *pdev)
-{
-	/*
-	 * The PCI config space is shared with the PAXC root port and the first
-	 * Ethernet device.  So, we need to workaround this by telling the PCI
-	 * code that the bridge is not an Ethernet device.
-	 */
-	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
-		pdev->class = PCI_CLASS_BRIDGE_PCI << 8;
-
-	/*
-	 * MPSS is not being set properly (as it is currently 0).  This is
-	 * because that area of the PCI config space is hard coded to zero, and
-	 * is not modifiable by firmware.  Set this to 2 (e.g., 512 byte MPS)
-	 * so that the MPS can be set to the real max value.
-	 */
-	pdev->pcie_mpss = 2;
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd750, quirk_paxc_bridge);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802, quirk_paxc_bridge);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804, quirk_paxc_bridge);
-#endif
-
 /*
  * Originally in EDAC sources for i82875P: Intel tells BIOS developers to
  * hide device 6 which configures the overflow device access containing the
-- 
2.20.1

[PATCH AUTOSEL 5.5 205/542] PCI: Add generic quirk for increasing D3hot delay

[Sasha Levin]

From: Daniel Drake <drake@endlessm.com>

[ Upstream commit 62fe23df067715a21c4aef44068efe7ceaa8f627 ]

Separate the D3 delay increase functionality out of quirk_radeon_pm() into
its own function so that it can be shared with other quirks, including the
AMD Ryzen XHCI quirk that will be introduced in a followup commit.

Tweak the function name and message to indicate more clearly that the delay
relates to a D3hot-to-D0 transition.

Link: https://lore.kernel.org/r/20191127053836.31624-1-drake@endlessm.com
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 5cd6a77ddefff..27008edce1a24 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1871,16 +1871,21 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2609, quirk_intel_pcie_pm);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260a, quirk_intel_pcie_pm);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260b, quirk_intel_pcie_pm);
 
+static void quirk_d3hot_delay(struct pci_dev *dev, unsigned int delay)
+{
+	if (dev->d3_delay >= delay)
+		return;
+
+	dev->d3_delay = delay;
+	pci_info(dev, "extending delay after power-on from D3hot to %d msec\n",
+		 dev->d3_delay);
+}
+
 static void quirk_radeon_pm(struct pci_dev *dev)
 {
 	if (dev->subsystem_vendor == PCI_VENDOR_ID_APPLE &&
-	    dev->subsystem_device == 0x00e2) {
-		if (dev->d3_delay < 20) {
-			dev->d3_delay = 20;
-			pci_info(dev, "extending delay after power-on from D3 to %d msec\n",
-				 dev->d3_delay);
-		}
-	}
+	    dev->subsystem_device == 0x00e2)
+		quirk_d3hot_delay(dev, 20);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6741, quirk_radeon_pm);
 
-- 
2.20.1

[PATCH AUTOSEL 5.5 206/542] PCI: Increase D3 delay for AMD Ryzen5/7 XHCI controllers

[Sasha Levin]

From: Daniel Drake <drake@endlessm.com>

[ Upstream commit 3030df209aa8cf831b9963829bd9f94900ee8032 ]

On Asus UX434DA (AMD Ryzen7 3700U) and Asus X512DK (AMD Ryzen5 3500U), the
XHCI controller fails to resume from runtime suspend or s2idle, and USB
becomes unusable from that point.

  xhci_hcd 0000:03:00.4: Refused to change power state, currently in D3
  xhci_hcd 0000:03:00.4: enabling device (0000 -> 0002)
  xhci_hcd 0000:03:00.4: WARN: xHC restore state timeout
  xhci_hcd 0000:03:00.4: PCI post-resume error -110!
  xhci_hcd 0000:03:00.4: HC died; cleaning up

During suspend, a transition to D3cold is attempted, however the affected
platforms do not seem to cut the power to the PCI device when in this
state, so the device stays in D3hot.

Upon resume, the D3hot-to-D0 transition is successful only if the D3 delay
is increased to 20ms. The transition failure does not appear to be
detectable as a CRS condition. Add a PCI quirk to increase the delay on the
affected hardware.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=205587
Link: http://lkml.kernel.org/r/CAD8Lp47Vh69gQjROYG69=waJgL7hs1PwnLonL9+27S_TcRhixA@mail.gmail.com
Link: https://lore.kernel.org/r/20191127053836.31624-2-drake@endlessm.com
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 27008edce1a24..c0b7aa4dc0f51 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1889,6 +1889,22 @@ static void quirk_radeon_pm(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6741, quirk_radeon_pm);
 
+/*
+ * Ryzen5/7 XHCI controllers fail upon resume from runtime suspend or s2idle.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=205587
+ *
+ * The kernel attempts to transition these devices to D3cold, but that seems
+ * to be ineffective on the platforms in question; the PCI device appears to
+ * remain on in D3hot state. The D3hot-to-D0 transition then requires an
+ * extended delay in order to succeed.
+ */
+static void quirk_ryzen_xhci_d3hot(struct pci_dev *dev)
+{
+	quirk_d3hot_delay(dev, 20);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e0, quirk_ryzen_xhci_d3hot);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e1, quirk_ryzen_xhci_d3hot);
+
 #ifdef CONFIG_X86_IO_APIC
 static int dmi_disable_ioapicreroute(const struct dmi_system_id *d)
 {
-- 
2.20.1

[PATCH AUTOSEL 5.5 224/542] PCI: Add nr_devfns parameter to pci_add_dma_alias()

[Sasha Levin]

From: James Sewart <jamessewart@arista.com>

[ Upstream commit 09298542cd891b43778db1f65aa3613aa5a562eb ]

Add a "nr_devfns" parameter to pci_add_dma_alias() so it can be used to
create DMA aliases for a range of devfns.

[bhelgaas: incorporate nr_devfns fix from James, update
quirk_pex_vca_alias() and setup_aliases()]
Signed-off-by: James Sewart <jamessewart@arista.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu.c |  7 ++-----
 drivers/pci/pci.c         | 22 +++++++++++++++++-----
 drivers/pci/quirks.c      | 23 +++++++++--------------
 include/linux/pci.h       |  2 +-
 4 files changed, 29 insertions(+), 25 deletions(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index bd25674ee4dba..7a6c056b9b9cc 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -230,11 +230,8 @@ static struct pci_dev *setup_aliases(struct device *dev)
 	 */
 	ivrs_alias = amd_iommu_alias_table[pci_dev_id(pdev)];
 	if (ivrs_alias != pci_dev_id(pdev) &&
-	    PCI_BUS_NUM(ivrs_alias) == pdev->bus->number) {
-		pci_add_dma_alias(pdev, ivrs_alias & 0xff);
-		pci_info(pdev, "Added PCI DMA alias %02x.%d\n",
-			PCI_SLOT(ivrs_alias), PCI_FUNC(ivrs_alias));
-	}
+	    PCI_BUS_NUM(ivrs_alias) == pdev->bus->number)
+		pci_add_dma_alias(pdev, ivrs_alias & 0xff, 1);
 
 	clone_aliases(pdev);
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 7b5fa2eabe095..951099279192d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -5998,7 +5998,8 @@ EXPORT_SYMBOL_GPL(pci_pr3_present);
 /**
  * pci_add_dma_alias - Add a DMA devfn alias for a device
  * @dev: the PCI device for which alias is added
- * @devfn: alias slot and function
+ * @devfn_from: alias slot and function
+ * @nr_devfns: number of subsequent devfns to alias
  *
  * This helper encodes an 8-bit devfn as a bit number in dma_alias_mask
  * which is used to program permissible bus-devfn source addresses for DMA
@@ -6014,8 +6015,13 @@ EXPORT_SYMBOL_GPL(pci_pr3_present);
  * cannot be left as a userspace activity).  DMA aliases should therefore
  * be configured via quirks, such as the PCI fixup header quirk.
  */
-void pci_add_dma_alias(struct pci_dev *dev, u8 devfn)
+void pci_add_dma_alias(struct pci_dev *dev, u8 devfn_from, unsigned nr_devfns)
 {
+	int devfn_to;
+
+	nr_devfns = min(nr_devfns, (unsigned) MAX_NR_DEVFNS - devfn_from);
+	devfn_to = devfn_from + nr_devfns - 1;
+
 	if (!dev->dma_alias_mask)
 		dev->dma_alias_mask = bitmap_zalloc(MAX_NR_DEVFNS, GFP_KERNEL);
 	if (!dev->dma_alias_mask) {
@@ -6023,9 +6029,15 @@ void pci_add_dma_alias(struct pci_dev *dev, u8 devfn)
 		return;
 	}
 
-	set_bit(devfn, dev->dma_alias_mask);
-	pci_info(dev, "Enabling fixed DMA alias to %02x.%d\n",
-		 PCI_SLOT(devfn), PCI_FUNC(devfn));
+	bitmap_set(dev->dma_alias_mask, devfn_from, nr_devfns);
+
+	if (nr_devfns == 1)
+		pci_info(dev, "Enabling fixed DMA alias to %02x.%d\n",
+				PCI_SLOT(devfn_from), PCI_FUNC(devfn_from));
+	else if (nr_devfns > 1)
+		pci_info(dev, "Enabling fixed DMA alias for devfn range from %02x.%d to %02x.%d\n",
+				PCI_SLOT(devfn_from), PCI_FUNC(devfn_from),
+				PCI_SLOT(devfn_to), PCI_FUNC(devfn_to));
 }
 
 bool pci_devs_are_dma_aliases(struct pci_dev *dev1, struct pci_dev *dev2)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index c0b7aa4dc0f51..9aa590eb712fe 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3927,7 +3927,7 @@ int pci_dev_specific_reset(struct pci_dev *dev, int probe)
 static void quirk_dma_func0_alias(struct pci_dev *dev)
 {
 	if (PCI_FUNC(dev->devfn) != 0)
-		pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+		pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 0), 1);
 }
 
 /*
@@ -3941,7 +3941,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias);
 static void quirk_dma_func1_alias(struct pci_dev *dev)
 {
 	if (PCI_FUNC(dev->devfn) != 1)
-		pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 1));
+		pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 1), 1);
 }
 
 /*
@@ -4026,7 +4026,7 @@ static void quirk_fixed_dma_alias(struct pci_dev *dev)
 
 	id = pci_match_id(fixed_dma_alias_tbl, dev);
 	if (id)
-		pci_add_dma_alias(dev, id->driver_data);
+		pci_add_dma_alias(dev, id->driver_data, 1);
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADAPTEC2, 0x0285, quirk_fixed_dma_alias);
 
@@ -4067,9 +4067,9 @@ DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias);
  */
 static void quirk_mic_x200_dma_alias(struct pci_dev *pdev)
 {
-	pci_add_dma_alias(pdev, PCI_DEVFN(0x10, 0x0));
-	pci_add_dma_alias(pdev, PCI_DEVFN(0x11, 0x0));
-	pci_add_dma_alias(pdev, PCI_DEVFN(0x12, 0x3));
+	pci_add_dma_alias(pdev, PCI_DEVFN(0x10, 0x0), 1);
+	pci_add_dma_alias(pdev, PCI_DEVFN(0x11, 0x0), 1);
+	pci_add_dma_alias(pdev, PCI_DEVFN(0x12, 0x3), 1);
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2260, quirk_mic_x200_dma_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2264, quirk_mic_x200_dma_alias);
@@ -4093,13 +4093,8 @@ static void quirk_pex_vca_alias(struct pci_dev *pdev)
 	const unsigned int num_pci_slots = 0x20;
 	unsigned int slot;
 
-	for (slot = 0; slot < num_pci_slots; slot++) {
-		pci_add_dma_alias(pdev, PCI_DEVFN(slot, 0x0));
-		pci_add_dma_alias(pdev, PCI_DEVFN(slot, 0x1));
-		pci_add_dma_alias(pdev, PCI_DEVFN(slot, 0x2));
-		pci_add_dma_alias(pdev, PCI_DEVFN(slot, 0x3));
-		pci_add_dma_alias(pdev, PCI_DEVFN(slot, 0x4));
-	}
+	for (slot = 0; slot < num_pci_slots; slot++)
+		pci_add_dma_alias(pdev, PCI_DEVFN(slot, 0x0), 5);
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2954, quirk_pex_vca_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2955, quirk_pex_vca_alias);
@@ -5334,7 +5329,7 @@ static void quirk_switchtec_ntb_dma_alias(struct pci_dev *pdev)
 			pci_dbg(pdev,
 				"Aliasing Partition %d Proxy ID %02x.%d\n",
 				pp, PCI_SLOT(devfn), PCI_FUNC(devfn));
-			pci_add_dma_alias(pdev, devfn);
+			pci_add_dma_alias(pdev, devfn, 1);
 		}
 	}
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index c393dff2d66f6..930fab2930736 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -2310,7 +2310,7 @@ static inline struct eeh_dev *pci_dev_to_eeh_dev(struct pci_dev *pdev)
 }
 #endif
 
-void pci_add_dma_alias(struct pci_dev *dev, u8 devfn);
+void pci_add_dma_alias(struct pci_dev *dev, u8 devfn_from, unsigned nr_devfns);
 bool pci_devs_are_dma_aliases(struct pci_dev *dev1, struct pci_dev *dev2);
 int pci_for_each_dma_alias(struct pci_dev *pdev,
 			   int (*fn)(struct pci_dev *pdev,
-- 
2.20.1

[PATCH AUTOSEL 5.5 225/542] PCI: Add DMA alias quirk for PLX PEX NTB

[Sasha Levin]

From: James Sewart <jamessewart@arista.com>

[ Upstream commit 7b90dfc4873b87c468cc6046538f46a531c1d785 ]

The PLX PEX NTB forwards DMA transactions using Requester IDs that don't
exist as PCI devices.  The devfn for a transaction is used as an index into
a lookup table storing the origin of a transaction on the other side of the
bridge.

Alias all possible devfns to the NTB device so that any transaction coming
in is governed by the mappings for the NTB.

Signed-off-by: James Sewart <jamessewart@arista.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 9aa590eb712fe..83953752337c4 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5371,6 +5371,21 @@ SWITCHTEC_QUIRK(0x8574);  /* PFXI 64XG3 */
 SWITCHTEC_QUIRK(0x8575);  /* PFXI 80XG3 */
 SWITCHTEC_QUIRK(0x8576);  /* PFXI 96XG3 */
 
+/*
+ * The PLX NTB uses devfn proxy IDs to move TLPs between NT endpoints.
+ * These IDs are used to forward responses to the originator on the other
+ * side of the NTB.  Alias all possible IDs to the NTB to permit access when
+ * the IOMMU is turned on.
+ */
+static void quirk_plx_ntb_dma_alias(struct pci_dev *pdev)
+{
+	pci_info(pdev, "Setting PLX NTB proxy ID aliases\n");
+	/* PLX NTB may use all 256 devfns */
+	pci_add_dma_alias(pdev, 0, 256);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, 0x87b0, quirk_plx_ntb_dma_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, 0x87b1, quirk_plx_ntb_dma_alias);
+
 /*
  * On Lenovo Thinkpad P50 SKUs with a Nvidia Quadro M1000M, the BIOS does
  * not always reset the secondary Nvidia GPU between reboots if the system
-- 
2.20.1

[PATCH AUTOSEL 5.5 253/542] PCI/ATS: Restore EXPORT_SYMBOL_GPL() for pci_{enable,disable}_ats()

[Sasha Levin]

From: Greg Kroah-Hartman <gregkh@google.com>

[ Upstream commit bb950bca5d522119f8b9ce3f6cbac4841c6d6517 ]

Commit d355bb209783 ("PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL()")
unexported a bunch of symbols from the PCI core since the only external
users were non-modular IOMMU drivers. Although most of those symbols
can remain private for now, 'pci_{enable,disable_ats()' is required for
the ARM SMMUv3 driver to build as a module, otherwise we get a build
failure as follows:

  | ERROR: "pci_enable_ats" [drivers/iommu/arm-smmu-v3.ko] undefined!
  | ERROR: "pci_disable_ats" [drivers/iommu/arm-smmu-v3.ko] undefined!

Re-export these two functions so that the ARM SMMUv3 driver can be build
as a module.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[will: rewrote commit message]
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/ats.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index b6f064c885c37..3ef0bb281e7cc 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -69,6 +69,7 @@ int pci_enable_ats(struct pci_dev *dev, int ps)
 	dev->ats_enabled = 1;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(pci_enable_ats);
 
 /**
  * pci_disable_ats - disable the ATS capability
@@ -87,6 +88,7 @@ void pci_disable_ats(struct pci_dev *dev)
 
 	dev->ats_enabled = 0;
 }
+EXPORT_SYMBOL_GPL(pci_disable_ats);
 
 void pci_restore_ats_state(struct pci_dev *dev)
 {
-- 
2.20.1

[PATCH AUTOSEL 5.5 337/542] PCI: Don't disable bridge BARs when assigning bus resources

[Sasha Levin]

From: Logan Gunthorpe <logang@deltatee.com>

[ Upstream commit 9db8dc6d0785225c42a37be7b44d1b07b31b8957 ]

Some PCI bridges implement BARs in addition to bridge windows.  For
example, here's a PLX switch:

  04:00.0 PCI bridge: PLX Technology, Inc. PEX 8724 24-Lane, 6-Port PCI
            Express Gen 3 (8 GT/s) Switch, 19 x 19mm FCBGA (rev ca)
	    (prog-if 00 [Normal decode])
      Flags: bus master, fast devsel, latency 0, IRQ 30, NUMA node 0
      Memory at 90a00000 (32-bit, non-prefetchable) [size=256K]
      Bus: primary=04, secondary=05, subordinate=0a, sec-latency=0
      I/O behind bridge: 00002000-00003fff
      Memory behind bridge: 90000000-909fffff
      Prefetchable memory behind bridge: 0000380000800000-0000380000bfffff

Previously, when the kernel assigned resource addresses (with the
pci=realloc command line parameter, for example) it could clear the struct
resource corresponding to the BAR.  When this happened, lspci would report
this BAR as "ignored":

   Region 0: Memory at <ignored> (32-bit, non-prefetchable) [size=256K]

This is because the kernel reports a zero start address and zero flags
in the corresponding sysfs resource file and in /proc/bus/pci/devices.
Investigation with 'lspci -x', however, shows the BIOS-assigned address
will still be programmed in the device's BAR registers.

It's clearly a bug that the kernel lost track of the BAR value, but in most
cases, this still won't result in a visible issue because nothing uses the
memory, so nothing is affected.  However, when an IOMMU is in use, it will
not reserve this space in the IOVA because the kernel no longer thinks the
range is valid.  (See dmar_init_reserved_ranges() for the Intel
implementation of this.)

Without the proper reserved range, a DMA mapping may allocate an IOVA that
matches a bridge BAR, which results in DMA accesses going to the BAR
instead of the intended RAM.

The problem was in pci_assign_unassigned_root_bus_resources().  When any
resource from a bridge device fails to get assigned, the code set the
resource's flags to zero.  This makes sense for bridge windows, as they
will be re-enabled later, but for regular BARs, it makes the kernel
permanently lose track of the fact that they decode address space.

Change pci_assign_unassigned_root_bus_resources() and
pci_assign_unassigned_bridge_resources() so they only clear "res->flags"
for bridge *windows*, not bridge BARs.

Fixes: da7822e5ad71 ("PCI: update bridge resources to get more big ranges when allocating space (again)")
Link: https://lore.kernel.org/r/20200108213208.4612-1-logang@deltatee.com
[bhelgaas: commit log, check for pci_is_bridge()]
Reported-by: Kit Chow <kchow@gigaio.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/setup-bus.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index f279826204eb4..591161ce0f516 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1803,12 +1803,18 @@ void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus)
 	/* Restore size and flags */
 	list_for_each_entry(fail_res, &fail_head, list) {
 		struct resource *res = fail_res->res;
+		int idx;
 
 		res->start = fail_res->start;
 		res->end = fail_res->end;
 		res->flags = fail_res->flags;
-		if (fail_res->dev->subordinate)
-			res->flags = 0;
+
+		if (pci_is_bridge(fail_res->dev)) {
+			idx = res - &fail_res->dev->resource[0];
+			if (idx >= PCI_BRIDGE_RESOURCES &&
+			    idx <= PCI_BRIDGE_RESOURCE_END)
+				res->flags = 0;
+		}
 	}
 	free_list(&fail_head);
 
@@ -2055,12 +2061,18 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
 	/* Restore size and flags */
 	list_for_each_entry(fail_res, &fail_head, list) {
 		struct resource *res = fail_res->res;
+		int idx;
 
 		res->start = fail_res->start;
 		res->end = fail_res->end;
 		res->flags = fail_res->flags;
-		if (fail_res->dev->subordinate)
-			res->flags = 0;
+
+		if (pci_is_bridge(fail_res->dev)) {
+			idx = res - &fail_res->dev->resource[0];
+			if (idx >= PCI_BRIDGE_RESOURCES &&
+			    idx <= PCI_BRIDGE_RESOURCE_END)
+				res->flags = 0;
+		}
 	}
 	free_list(&fail_head);
 
-- 
2.20.1

[PATCH AUTOSEL 5.5 457/542] PCI/AER: Initialize aer_fifo

[Sasha Levin]

From: Dongdong Liu <liudongdong3@huawei.com>

[ Upstream commit d95f20c4f07020ebc605f3b46af4b6db9eb5fc99 ]

Previously we did not call INIT_KFIFO() for aer_fifo.  This leads to
kfifo_put() sometimes returning 0 (queue full) when in fact it is not.

It is easy to reproduce the problem by using aer-inject:

  $ aer-inject -s :82:00.0 multiple-corr-nonfatal

The content of the multiple-corr-nonfatal file is as below:

  AER
  COR RCVR
  HL 0 1 2 3
  AER
  UNCOR POISON_TLP
  HL 4 5 6 7

Fixes: 27c1ce8bbed7 ("PCI/AER: Use kfifo for tracking events instead of reimplementing it")
Link: https://lore.kernel.org/r/1579767991-103898-1-git-send-email-liudongdong3@huawei.com
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/aer.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 1ca86f2e01665..4a818b07a1afb 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1445,6 +1445,7 @@ static int aer_probe(struct pcie_device *dev)
 		return -ENOMEM;
 
 	rpc->rpd = port;
+	INIT_KFIFO(rpc->aer_fifo);
 	set_service_data(dev, rpc);
 
 	status = devm_request_threaded_irq(device, dev->irq, aer_irq, aer_isr,
-- 
2.20.1

Re: [PATCH AUTOSEL 5.5 253/542] PCI/ATS: Restore EXPORT_SYMBOL_GPL() for pci_{enable,disable}_ats()

[Greg Kroah-Hartman]

On Fri, Feb 14, 2020 at 10:44:05AM -0500, Sasha Levin wrote:
> From: Greg Kroah-Hartman <gregkh@google.com>
> 
> [ Upstream commit bb950bca5d522119f8b9ce3f6cbac4841c6d6517 ]
> 
> Commit d355bb209783 ("PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL()")
> unexported a bunch of symbols from the PCI core since the only external
> users were non-modular IOMMU drivers. Although most of those symbols
> can remain private for now, 'pci_{enable,disable_ats()' is required for
> the ARM SMMUv3 driver to build as a module, otherwise we get a build
> failure as follows:
> 
>   | ERROR: "pci_enable_ats" [drivers/iommu/arm-smmu-v3.ko] undefined!
>   | ERROR: "pci_disable_ats" [drivers/iommu/arm-smmu-v3.ko] undefined!
> 
> Re-export these two functions so that the ARM SMMUv3 driver can be build
> as a module.
> 
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: Joerg Roedel <jroedel@suse.de>
> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
> [will: rewrote commit message]
> Signed-off-by: Will Deacon <will@kernel.org>
> Tested-by: John Garry <john.garry@huawei.com> # smmu v3
> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> Signed-off-by: Joerg Roedel <jroedel@suse.de>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/pci/ats.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
> index b6f064c885c37..3ef0bb281e7cc 100644
> --- a/drivers/pci/ats.c
> +++ b/drivers/pci/ats.c
> @@ -69,6 +69,7 @@ int pci_enable_ats(struct pci_dev *dev, int ps)
>  	dev->ats_enabled = 1;
>  	return 0;
>  }
> +EXPORT_SYMBOL_GPL(pci_enable_ats);
>  
>  /**
>   * pci_disable_ats - disable the ATS capability
> @@ -87,6 +88,7 @@ void pci_disable_ats(struct pci_dev *dev)
>  
>  	dev->ats_enabled = 0;
>  }
> +EXPORT_SYMBOL_GPL(pci_disable_ats);
>  
>  void pci_restore_ats_state(struct pci_dev *dev)
>  {
> -- 
> 2.20.1
> 

This isn't needed to be backported as the problem it solves is not in
the 5.5 or older kernels, it only showed up in 5.6-rc1, and this was
part of a larger patchset.

So please drop from everywhere, thanks.

greg k-h