linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>,
	David Miller <davem@davemloft.net>,
	Mirko Lindner <mlindner@marvell.com>,
	Stephen Hemminger <stephen@networkplumber.org>,
	Clemens Ladisch <clemens@ladisch.de>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	alsa-devel@alsa-project.org
Subject: Re: [PATCH v3 2/8] PCI: add pci_status_get_and_clear_errors
Date: Tue, 25 Feb 2020 14:57:25 -0600	[thread overview]
Message-ID: <20200225205725.GA197467@google.com> (raw)
In-Reply-To: <45054c7d-cc48-2be0-11fa-4c3ffce8fdd7@gmail.com>

On Tue, Feb 25, 2020 at 03:04:23PM +0100, Heiner Kallweit wrote:
> Few drivers use the following code sequence:

This reads like "Not very many drivers".  I think "Several drivers"
would capture the sense of this better.

> 1. Read PCI_STATUS
> 2. Mask out non-error bits
> 3. Action based on error bits set
> 4. Write back set error bits to clear them
> 
> As this is a repeated pattern, add a helper to the PCI core.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
>  drivers/pci/pci.c   | 23 +++++++++++++++++++++++
>  include/linux/pci.h |  1 +
>  2 files changed, 24 insertions(+)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index d828ca835..c16b0ba2a 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -173,6 +173,29 @@ unsigned char pci_bus_max_busnr(struct pci_bus *bus)
>  }
>  EXPORT_SYMBOL_GPL(pci_bus_max_busnr);
>  
> +/**
> + * pci_status_get_and_clear_errors - return and clear error bits in PCI_STATUS
> + * @pdev: the PCI device
> + *
> + * Returns error bits set in PCI_STATUS and clears them.
> + */
> +int pci_status_get_and_clear_errors(struct pci_dev *pdev)
> +{
> +	u16 status;
> +	int ret;
> +
> +	ret = pci_read_config_word(pdev, PCI_STATUS, &status);
> +	if (ret != PCIBIOS_SUCCESSFUL)
> +		return -EIO;
> +
> +	status &= PCI_STATUS_ERROR_BITS;
> +	if (status)
> +		pci_write_config_word(pdev, PCI_STATUS, status);
> +
> +	return status;
> +}
> +EXPORT_SYMBOL_GPL(pci_status_get_and_clear_errors);
> +
>  #ifdef CONFIG_HAS_IOMEM
>  void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar)
>  {
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 3840a541a..7a75aae04 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1203,6 +1203,7 @@ int pci_select_bars(struct pci_dev *dev, unsigned long flags);
>  bool pci_device_is_present(struct pci_dev *pdev);
>  void pci_ignore_hotplug(struct pci_dev *dev);
>  struct pci_dev *pci_real_dma_dev(struct pci_dev *dev);
> +int pci_status_get_and_clear_errors(struct pci_dev *pdev);
>  
>  int __printf(6, 7) pci_request_irq(struct pci_dev *dev, unsigned int nr,
>  		irq_handler_t handler, irq_handler_t thread_fn, void *dev_id,
> -- 
> 2.25.1
> 
> 
> 
> 

  reply	other threads:[~2020-02-25 20:57 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-25 14:03 [PATCH v3 0/8] PCI: add and use constant PCI_STATUS_ERROR_BITS and helper pci_status_get_and_clear_errors Heiner Kallweit
2020-02-25 14:03 ` [PATCH v3 1/8] PCI: add constant PCI_STATUS_ERROR_BITS Heiner Kallweit
2020-02-25 20:50   ` Bjorn Helgaas
2020-02-25 21:35     ` Heiner Kallweit
2020-02-25 14:04 ` [PATCH v3 2/8] PCI: add pci_status_get_and_clear_errors Heiner Kallweit
2020-02-25 20:57   ` Bjorn Helgaas [this message]
2020-02-25 14:04 ` [PATCH v3 3/8] r8169: use pci_status_get_and_clear_errors Heiner Kallweit
2020-02-25 14:05 ` [PATCH v3 4/8] net: cassini: " Heiner Kallweit
2020-02-25 14:05 ` [PATCH v3 5/8] net: sungem: " Heiner Kallweit
2020-02-25 14:06 ` [PATCH v3 6/8] net: skfp: use PCI_STATUS_ERROR_BITS Heiner Kallweit
2020-02-25 14:07 ` [PATCH v3 7/8] PCI: pci-bridge-emul: " Heiner Kallweit
2020-02-25 14:07 ` [PATCH v3 8/8] sound: bt87x: use pci_status_get_and_clear_errors Heiner Kallweit
2020-02-25 20:57 ` [PATCH v3 0/8] PCI: add and use constant PCI_STATUS_ERROR_BITS and helper pci_status_get_and_clear_errors Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200225205725.GA197467@google.com \
    --to=helgaas@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=clemens@ladisch.de \
    --cc=davem@davemloft.net \
    --cc=hkallweit1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mlindner@marvell.com \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    --cc=perex@perex.cz \
    --cc=stephen@networkplumber.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).