From: Jacob Keller <jacob.e.keller@intel.com>
To: linux-pci@vger.kernel.org, netdev@vger.kernel.org,
Bjorn Helgaas <bhelgaas@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>,
David Miller <davem@davemloft.net>,
Jacob Keller <jacob.e.keller@intel.com>
Subject: [PATCH v2 3/6] scsi: qedf: Use pci_get_dsn()
Date: Mon, 2 Mar 2020 18:25:02 -0800 [thread overview]
Message-ID: <20200303022506.1792776-4-jacob.e.keller@intel.com> (raw)
In-Reply-To: <20200303022506.1792776-1-jacob.e.keller@intel.com>
Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().
The original code used a for-loop that looped over each of the 8 bytes
and copied them into a temporary buffer. pci_get_dsn() uses two calls to
pci_read_config_dword, and correctly bitwise ORs them into a u64. Thus,
we can simplify the snprintf significantly using %016llX on a u64 value.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
---
The QLogic-Storage-Upstream@cavium.com appears to be a dud. I'm not sure who
maintains this driver, and thus am not sure who to add to the Cc.
drivers/scsi/qedf/qedf_main.c | 18 +++++-------------
1 file changed, 5 insertions(+), 13 deletions(-)
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 604856e72cfb..5b19f5175c5c 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -1577,8 +1577,7 @@ static void qedf_setup_fdmi(struct qedf_ctx *qedf)
{
struct fc_lport *lport = qedf->lport;
struct fc_host_attrs *fc_host = shost_to_fc_host(lport->host);
- u8 buf[8];
- int i, pos;
+ u64 dsn;
/*
* fdmi_enabled needs to be set for libfc to execute FDMI registration.
@@ -1591,18 +1590,11 @@ static void qedf_setup_fdmi(struct qedf_ctx *qedf)
*/
/* Get the PCI-e Device Serial Number Capability */
- pos = pci_find_ext_capability(qedf->pdev, PCI_EXT_CAP_ID_DSN);
- if (pos) {
- pos += 4;
- for (i = 0; i < 8; i++)
- pci_read_config_byte(qedf->pdev, pos + i, &buf[i]);
-
+ dsn = pci_get_dsn(qedf->pdev);
+ if (dsn)
snprintf(fc_host->serial_number,
- sizeof(fc_host->serial_number),
- "%02X%02X%02X%02X%02X%02X%02X%02X",
- buf[7], buf[6], buf[5], buf[4],
- buf[3], buf[2], buf[1], buf[0]);
- } else
+ sizeof(fc_host->serial_number), "%016llX", dsn);
+ else
snprintf(fc_host->serial_number,
sizeof(fc_host->serial_number), "Unknown");
--
2.25.0.368.g28a2d05eebfb
next prev parent reply other threads:[~2020-03-03 2:25 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-27 22:36 [PATCH 0/5] pci: implement function to read Device Serial Number Jacob Keller
2020-02-27 22:36 ` [PATCH] ice-shared: add macro specifying max NVM offset Jacob Keller
2020-02-27 22:43 ` Jacob Keller
2020-02-27 22:36 ` [PATCH 1/5] pci: introduce pci_get_dsn Jacob Keller
2020-03-01 5:27 ` David Miller
2020-03-02 19:58 ` Jacob Keller
2020-03-02 22:25 ` Bjorn Helgaas
2020-03-02 22:33 ` Jacob Keller
2020-03-02 23:20 ` Bjorn Helgaas
2020-03-02 23:24 ` Jacob Keller
2020-03-02 23:39 ` Bjorn Helgaas
2020-03-03 2:24 ` [PATCH v2 0/6] PCI: Implement function to read Device Serial Number Jacob Keller
2020-03-03 2:25 ` [PATCH v2 1/6] PCI: Introduce pci_get_dsn Jacob Keller
2020-03-04 22:42 ` Bjorn Helgaas
2020-03-03 2:25 ` [PATCH v2 2/6] bnxt_en: Use pci_get_dsn() Jacob Keller
2020-03-03 2:25 ` Jacob Keller [this message]
2020-03-03 2:25 ` [PATCH v2 4/6] ice: " Jacob Keller
2020-03-03 2:25 ` [PATCH v2 5/6] ixgbe: " Jacob Keller
2020-03-03 2:25 ` [PATCH v2 6/6] nfp: " Jacob Keller
2020-03-03 3:40 ` Jakub Kicinski
2020-03-03 17:36 ` Jacob Keller
2020-03-04 22:28 ` [PATCH v2 0/6] PCI: Implement function to read Device Serial Number David Miller
2020-03-06 1:30 ` David Miller
2020-02-27 22:36 ` [PATCH 2/5] bnxt_en: use pci_get_dsn Jacob Keller
2020-03-02 22:25 ` Bjorn Helgaas
2020-02-27 22:36 ` [PATCH 3/5] scsi: qedf: " Jacob Keller
2020-02-27 22:36 ` [PATCH 4/5] ice: " Jacob Keller
2020-02-27 22:36 ` [PATCH 5/5] ixgbe: " Jacob Keller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200303022506.1792776-4-jacob.e.keller@intel.com \
--to=jacob.e.keller@intel.com \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).