archive mirror
 help / color / mirror / Atom feed
From: Kai-Heng Feng <>
	Kai-Heng Feng <>
Subject: [PATCH] PCI/PM: Skip link training delay for S3 resume
Date: Wed, 11 Mar 2020 12:52:49 +0800	[thread overview]
Message-ID: <> (raw)

Commit ad9001f2f411 ("PCI/PM: Add missing link delays required by the
PCIe spec") added a 1100ms delay on resume for bridges that don't
support Link Active Reporting.

The commit also states that the delay can be skipped for S3, as the
firmware should already handled the case for us.

So let's skip the link training delay for S3, to save 1100ms resume

Signed-off-by: Kai-Heng Feng <>
 drivers/pci/pci-driver.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 0454ca0e4e3f..3050375bad04 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -916,7 +916,8 @@ static int pci_pm_resume_noirq(struct device *dev)
 	pci_fixup_device(pci_fixup_resume_early, pci_dev);
-	if (!skip_bus_pm && prev_state == PCI_D3cold)
+	if (!skip_bus_pm && prev_state == PCI_D3cold
+	    && !pm_resume_via_firmware())
 	if (pci_has_legacy_pm_support(pci_dev))

             reply	other threads:[~2020-03-11  4:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-11  4:52 Kai-Heng Feng [this message]
2020-03-11 10:28 ` [PATCH] PCI/PM: Skip link training delay for S3 resume Mika Westerberg
2020-03-12  4:23   ` Kai-Heng Feng
2020-03-12  8:04     ` Mika Westerberg
2020-03-12  9:45       ` Kai-Heng Feng
2020-03-12 10:08         ` Mika Westerberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).