linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
To: linux-kernel@vger.kernel.org, Mathias Nyman <mathias.nyman@intel.com>
Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com, f.fainelli@gmail.com,
	gregkh@linuxfoundation.org, tim.gover@raspberrypi.org,
	linux-pci@vger.kernel.org, wahrenst@gmx.net,
	sergei.shtylyov@cogentembedded.com,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Subject: [PATCH v6 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
Date: Tue, 24 Mar 2020 19:28:12 +0100	[thread overview]
Message-ID: <20200324182812.20420-5-nsaenzjulienne@suse.de> (raw)
In-Reply-To: <20200324182812.20420-1-nsaenzjulienne@suse.de>

On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
loaded directly from an EEPROM or, if not present, by the SoC's
VideCore. Inform VideCore that VL805 was just reset.

Also, as this creates a dependency between USB_PCI and VideoCore's
firmware interface. Since USB_PCI can't be set as a module neither this
should.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

---

Changes since v5:
 - Fix Kconfig issue with allmodconfig

Changes since v4:
 - Do not split up error message

Changes since v3:
 - Add more complete error message

Changes since v1:
 - Make RASPBERRYPI_FIRMWARE dependent on this quirk to make sure it
   gets compiled when needed.

 drivers/firmware/Kconfig      |  3 ++-
 drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
 2 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index ea869addc89b..78ab2ad6d3f0 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -178,8 +178,9 @@ config ISCSI_IBFT
 	  Otherwise, say N.
 
 config RASPBERRYPI_FIRMWARE
-	tristate "Raspberry Pi Firmware Driver"
+	bool "Raspberry Pi Firmware Driver"
 	depends on BCM2835_MBOX
+	default USB_PCI
 	help
 	  This option enables support for communicating with the firmware on the
 	  Raspberry Pi.
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index beb2efa71341..0dc34668bb2a 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -16,6 +16,9 @@
 #include <linux/export.h>
 #include <linux/acpi.h>
 #include <linux/dmi.h>
+
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
 #include "pci-quirks.h"
 #include "xhci-ext-caps.h"
 
@@ -1243,11 +1246,24 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
 
 static void quirk_usb_early_handoff(struct pci_dev *pdev)
 {
+	int ret;
+
 	/* Skip Netlogic mips SoC's internal PCI USB controller.
 	 * This device does not need/support EHCI/OHCI handoff
 	 */
 	if (pdev->vendor == 0x184e)	/* vendor Netlogic */
 		return;
+
+	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
+		ret = rpi_firmware_init_vl805(pdev);
+		if (ret) {
+			/* Firmware might be outdated, or something failed */
+			dev_warn(&pdev->dev,
+				 "Failed to load VL805's firmware: %d. Will continue to attempt to work, but bad things might happen. You should fix this...\n",
+				 ret);
+		}
+	}
+
 	if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
 			pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
 			pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
-- 
2.25.1


      parent reply	other threads:[~2020-03-24 18:28 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-24 18:28 [PATCH v6 0/4] USB: pci-quirks: Add Raspberry Pi 4 quirk Nicolas Saenz Julienne
2020-03-24 18:28 ` [PATCH v6 1/4] soc: bcm2835: Sync xHCI reset firmware property with downstream Nicolas Saenz Julienne
2020-04-02 18:01   ` Bjorn Helgaas
2020-04-04 20:11     ` Florian Fainelli
2020-03-24 18:28 ` [PATCH v6 2/4] firmware: raspberrypi: Introduce vl805 init routine Nicolas Saenz Julienne
2020-04-01 20:37   ` Bjorn Helgaas
2020-04-02 11:32     ` Nicolas Saenz Julienne
2020-04-02 19:40       ` Bjorn Helgaas
2020-04-04 18:56         ` Nicolas Saenz Julienne
2020-03-24 18:28 ` [PATCH v6 3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present Nicolas Saenz Julienne
2020-04-01 20:41   ` Bjorn Helgaas
2020-04-02 14:27     ` Nicolas Saenz Julienne
2020-04-02 19:38       ` Bjorn Helgaas
2020-04-04 19:20         ` Nicolas Saenz Julienne
2020-04-04 20:09           ` Florian Fainelli
2020-03-24 18:28 ` Nicolas Saenz Julienne [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200324182812.20420-5-nsaenzjulienne@suse.de \
    --to=nsaenzjulienne@suse.de \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=f.fainelli@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=sergei.shtylyov@cogentembedded.com \
    --cc=tim.gover@raspberrypi.org \
    --cc=wahrenst@gmx.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).