linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Heiner Kallweit <hkallweit1@gmail.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Sasha Levin <sashal@kernel.org>,
	linux-pci@vger.kernel.org
Subject: [PATCH AUTOSEL 5.4 77/78] PCI/ASPM: Allow re-enabling Clock PM
Date: Sat, 18 Apr 2020 10:40:46 -0400	[thread overview]
Message-ID: <20200418144047.9013-77-sashal@kernel.org> (raw)
In-Reply-To: <20200418144047.9013-1-sashal@kernel.org>

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 35efea32b26f9aacc99bf07e0d2cdfba2028b099 ]

Previously Clock PM could not be re-enabled after being disabled by
pci_disable_link_state() because clkpm_capable was reset.  Change this by
adding a clkpm_disable field similar to aspm_disable.

Link: https://lore.kernel.org/r/4e8a66db-7d53-4a66-c26c-f0037ffaa705@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/aspm.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 652ef23bba35a..ccf3a69bd97ff 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -64,6 +64,7 @@ struct pcie_link_state {
 	u32 clkpm_capable:1;		/* Clock PM capable? */
 	u32 clkpm_enabled:1;		/* Current Clock PM state */
 	u32 clkpm_default:1;		/* Default Clock PM state by BIOS */
+	u32 clkpm_disable:1;		/* Clock PM disabled */
 
 	/* Exit latencies */
 	struct aspm_latency latency_up;	/* Upstream direction exit latency */
@@ -161,8 +162,11 @@ static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
 
 static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
 {
-	/* Don't enable Clock PM if the link is not Clock PM capable */
-	if (!link->clkpm_capable)
+	/*
+	 * Don't enable Clock PM if the link is not Clock PM capable
+	 * or Clock PM is disabled
+	 */
+	if (!link->clkpm_capable || link->clkpm_disable)
 		enable = 0;
 	/* Need nothing if the specified equals to current state */
 	if (link->clkpm_enabled == enable)
@@ -192,7 +196,8 @@ static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
 	}
 	link->clkpm_enabled = enabled;
 	link->clkpm_default = enabled;
-	link->clkpm_capable = (blacklist) ? 0 : capable;
+	link->clkpm_capable = capable;
+	link->clkpm_disable = blacklist ? 1 : 0;
 }
 
 static bool pcie_retrain_link(struct pcie_link_state *link)
@@ -1097,10 +1102,9 @@ static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
 		link->aspm_disable |= ASPM_STATE_L1;
 	pcie_config_aspm_link(link, policy_to_aspm_state(link));
 
-	if (state & PCIE_LINK_STATE_CLKPM) {
-		link->clkpm_capable = 0;
-		pcie_set_clkpm(link, 0);
-	}
+	if (state & PCIE_LINK_STATE_CLKPM)
+		link->clkpm_disable = 1;
+	pcie_set_clkpm(link, policy_to_clkpm_state(link));
 	mutex_unlock(&aspm_lock);
 	if (sem)
 		up_read(&pci_bus_sem);
-- 
2.20.1


  parent reply	other threads:[~2020-04-18 14:52 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200418144047.9013-1-sashal@kernel.org>
2020-04-18 14:39 ` [PATCH AUTOSEL 5.4 30/78] drm/nouveau: workaround runpm fail by disabling PCI power management on certain intel bridges Sasha Levin
2020-04-18 14:40 ` [PATCH AUTOSEL 5.4 65/78] PCI/PM: Add pcie_wait_for_link_delay() Sasha Levin
2020-04-18 14:40 ` [PATCH AUTOSEL 5.4 67/78] PCI: pciehp: Prevent deadlock on disconnect Sasha Levin
2020-04-18 14:40 ` [PATCH AUTOSEL 5.4 70/78] pci/hotplug/pnv-php: Remove erroneous warning Sasha Levin
2020-04-21 11:03   ` Frederic Barrat
2020-04-18 14:40 ` Sasha Levin [this message]
2020-04-18 14:40 ` [PATCH AUTOSEL 5.4 78/78] PCI/PM: Add missing link delays required by the PCIe spec Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200418144047.9013-77-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).