linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Robin Murphy <robin.murphy@arm.com>,
	Tom Joseph <tjoseph@cadence.com>
Cc: <linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <kishon@ti.com>
Subject: [PATCH v3 4/4] PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property
Date: Fri, 8 May 2020 18:36:46 +0530	[thread overview]
Message-ID: <20200508130646.23939-5-kishon@ti.com> (raw)
In-Reply-To: <20200508130646.23939-1-kishon@ti.com>

Cadence PCIe core driver (host mode) uses "cdns,no-bar-match-nbits"
property to configure the number of bits passed through from PCIe
address to internal address in Inbound Address Translation register.
This only used the NO MATCH BAR.

However standard PCI dt-binding already defines "dma-ranges" to
describe the address ranges accessible by PCIe controller. Add support
in Cadence PCIe host driver to parse dma-ranges and configure the
inbound regions for BAR0, BAR1 and NO MATCH BAR. Cadence IP specifies
maximum size for BAR0 as 256GB, maximum size for BAR1 as 2 GB, so if
the dma-ranges specifies a size larger than the maximum allowed, the
driver will split and configure the BARs.

Legacy device tree binding compatibility is maintained by retaining
support for "cdns,no-bar-match-nbits".

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../controller/cadence/pcie-cadence-host.c    | 141 ++++++++++++++++--
 drivers/pci/controller/cadence/pcie-cadence.h |  17 ++-
 2 files changed, 141 insertions(+), 17 deletions(-)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 6ecebb79057a..2485ecd8434d 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -11,6 +11,12 @@
 
 #include "pcie-cadence.h"
 
+static u64 cdns_rp_bar_max_size[] = {
+	[RP_BAR0] = _ULL(128 * SZ_2G),
+	[RP_BAR1] = SZ_2G,
+	[RP_NO_BAR] = SZ_64T,
+};
+
 void __iomem *cdns_pci_map_bus(struct pci_bus *bus, unsigned int devfn,
 			       int where)
 {
@@ -106,6 +112,117 @@ static int cdns_pcie_host_init_root_port(struct cdns_pcie_rc *rc)
 	return 0;
 }
 
+static void cdns_pcie_host_bar_ib_config(struct cdns_pcie_rc *rc,
+					 enum cdns_pcie_rp_bar bar,
+					 u64 cpu_addr, u32 aperture)
+{
+	struct cdns_pcie *pcie = &rc->pcie;
+	u32 addr0, addr1;
+
+	addr0 = CDNS_PCIE_AT_IB_RP_BAR_ADDR0_NBITS(aperture) |
+		(lower_32_bits(cpu_addr) & GENMASK(31, 8));
+	addr1 = upper_32_bits(cpu_addr);
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_IB_RP_BAR_ADDR0(bar), addr0);
+	cdns_pcie_writel(pcie, CDNS_PCIE_AT_IB_RP_BAR_ADDR1(bar), addr1);
+}
+
+static int cdns_pcie_host_bar_config(struct cdns_pcie_rc *rc,
+				     struct resource_entry *entry,
+				     enum cdns_pcie_rp_bar *index)
+{
+	u64 cpu_addr, pci_addr, size, winsize;
+	struct cdns_pcie *pcie = &rc->pcie;
+	struct device *dev = pcie->dev;
+	enum cdns_pcie_rp_bar bar;
+	unsigned long flags;
+	u32 aperture;
+	u32 value;
+
+	cpu_addr = entry->res->start;
+	flags = entry->res->flags;
+	pci_addr = entry->res->start - entry->offset;
+	size = resource_size(entry->res);
+	bar = *index;
+
+	if (entry->offset) {
+		dev_err(dev, "Cannot map PCI addr: %llx to CPU addr: %llx\n",
+			pci_addr, cpu_addr);
+		return -EINVAL;
+	}
+
+	value = cdns_pcie_readl(pcie, CDNS_PCIE_LM_RC_BAR_CFG);
+	while (size > 0) {
+		if (bar > RP_NO_BAR) {
+			dev_err(dev, "Failed to map inbound regions!\n");
+			return -EINVAL;
+		}
+
+		winsize = size;
+		if (size > cdns_rp_bar_max_size[bar])
+			winsize = cdns_rp_bar_max_size[bar];
+
+		aperture = ilog2(winsize);
+
+		cdns_pcie_host_bar_ib_config(rc, bar, cpu_addr, aperture);
+
+		if (bar == RP_NO_BAR)
+			break;
+
+		if (winsize + cpu_addr >= SZ_4G) {
+			if (!(flags & IORESOURCE_PREFETCH))
+				value |= LM_RC_BAR_CFG_CTRL_MEM_64BITS(bar);
+			value |= LM_RC_BAR_CFG_CTRL_PREF_MEM_64BITS(bar);
+		} else {
+			if (!(flags & IORESOURCE_PREFETCH))
+				value |= LM_RC_BAR_CFG_CTRL_MEM_32BITS(bar);
+			value |= LM_RC_BAR_CFG_CTRL_PREF_MEM_32BITS(bar);
+		}
+
+		value |= LM_RC_BAR_CFG_APERTURE(bar, aperture);
+
+		size -= winsize;
+		cpu_addr += winsize;
+		bar++;
+	}
+	cdns_pcie_writel(pcie, CDNS_PCIE_LM_RC_BAR_CFG, value);
+	*index = bar;
+
+	return 0;
+}
+
+static int cdns_pcie_host_map_dma_ranges(struct cdns_pcie_rc *rc)
+{
+	enum cdns_pcie_rp_bar bar = RP_BAR0;
+	struct cdns_pcie *pcie = &rc->pcie;
+	struct device *dev = pcie->dev;
+	struct device_node *np = dev->of_node;
+	struct pci_host_bridge *bridge;
+	struct resource_entry *entry;
+	u32 no_bar_nbits = 32;
+	int err;
+
+	bridge = pci_host_bridge_from_priv(rc);
+	if (!bridge)
+		return -ENOMEM;
+
+	if (list_empty(&bridge->dma_ranges)) {
+		of_property_read_u32(np, "cdns,no-bar-match-nbits",
+				     &no_bar_nbits);
+		cdns_pcie_host_bar_ib_config(rc, RP_NO_BAR, 0x0, no_bar_nbits);
+		return 0;
+	}
+
+	resource_list_for_each_entry(entry, &bridge->dma_ranges) {
+		err = cdns_pcie_host_bar_config(rc, entry, &bar);
+		if (err) {
+			dev_err(dev, "Fail to configure IB using dma-ranges\n");
+			return err;
+		}
+	}
+
+	return 0;
+}
+
 static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
 {
 	struct cdns_pcie *pcie = &rc->pcie;
@@ -160,16 +277,9 @@ static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
 		r++;
 	}
 
-	/*
-	 * Set Root Port no BAR match Inbound Translation registers:
-	 * needed for MSI and DMA.
-	 * Root Port BAR0 and BAR1 are disabled, hence no need to set their
-	 * inbound translation registers.
-	 */
-	addr0 = CDNS_PCIE_AT_IB_RP_BAR_ADDR0_NBITS(rc->no_bar_nbits);
-	addr1 = 0;
-	cdns_pcie_writel(pcie, CDNS_PCIE_AT_IB_RP_BAR_ADDR0(RP_NO_BAR), addr0);
-	cdns_pcie_writel(pcie, CDNS_PCIE_AT_IB_RP_BAR_ADDR1(RP_NO_BAR), addr1);
+	err = cdns_pcie_host_map_dma_ranges(rc);
+	if (err)
+		return err;
 
 	return 0;
 }
@@ -179,10 +289,16 @@ static int cdns_pcie_host_init(struct device *dev,
 			       struct cdns_pcie_rc *rc)
 {
 	struct resource *bus_range = NULL;
+	struct pci_host_bridge *bridge;
 	int err;
 
+	bridge = pci_host_bridge_from_priv(rc);
+	if (!bridge)
+		return -ENOMEM;
+
 	/* Parse our PCI ranges and request their resources */
-	err = pci_parse_request_of_pci_ranges(dev, resources, NULL, &bus_range);
+	err = pci_parse_request_of_pci_ranges(dev, resources,
+					      &bridge->dma_ranges, &bus_range);
 	if (err)
 		return err;
 
@@ -239,9 +355,6 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 	pcie = &rc->pcie;
 	pcie->is_rc = true;
 
-	rc->no_bar_nbits = 32;
-	of_property_read_u32(np, "cdns,no-bar-match-nbits", &rc->no_bar_nbits);
-
 	rc->vendor_id = 0xffff;
 	of_property_read_u32(np, "vendor-id", &rc->vendor_id);
 
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index f349f5828a58..336237a7025c 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -92,6 +92,20 @@
 #define  CDNS_PCIE_LM_BAR_CFG_CTRL_MEM_64BITS		0x6
 #define  CDNS_PCIE_LM_BAR_CFG_CTRL_PREFETCH_MEM_64BITS	0x7
 
+#define LM_RC_BAR_CFG_CTRL_DISABLED(bar)		\
+		(CDNS_PCIE_LM_BAR_CFG_CTRL_DISABLED << (((bar) * 8) + 6))
+#define LM_RC_BAR_CFG_CTRL_IO_32BITS(bar)		\
+		(CDNS_PCIE_LM_BAR_CFG_CTRL_IO_32BITS << (((bar) * 8) + 6))
+#define LM_RC_BAR_CFG_CTRL_MEM_32BITS(bar)		\
+		(CDNS_PCIE_LM_BAR_CFG_CTRL_MEM_32BITS << (((bar) * 8) + 6))
+#define LM_RC_BAR_CFG_CTRL_PREF_MEM_32BITS(bar)	\
+	(CDNS_PCIE_LM_BAR_CFG_CTRL_PREFETCH_MEM_32BITS << (((bar) * 8) + 6))
+#define LM_RC_BAR_CFG_CTRL_MEM_64BITS(bar)		\
+		(CDNS_PCIE_LM_BAR_CFG_CTRL_MEM_64BITS << (((bar) * 8) + 6))
+#define LM_RC_BAR_CFG_CTRL_PREF_MEM_64BITS(bar)	\
+	(CDNS_PCIE_LM_BAR_CFG_CTRL_PREFETCH_MEM_64BITS << (((bar) * 8) + 6))
+#define LM_RC_BAR_CFG_APERTURE(bar, aperture)		\
+					(((aperture) - 2) << ((bar) * 8))
 
 /*
  * Endpoint Function Registers (PCI configuration space for endpoint functions)
@@ -266,8 +280,6 @@ struct cdns_pcie {
  * @bus_range: first/last buses behind the PCIe host controller
  * @cfg_base: IO mapped window to access the PCI configuration space of a
  *            single function at a time
- * @no_bar_nbits: Number of bits to keep for inbound (PCIe -> CPU) address
- *                translation (nbits sets into the "no BAR match" register)
  * @vendor_id: PCI vendor ID
  * @device_id: PCI device ID
  */
@@ -276,7 +288,6 @@ struct cdns_pcie_rc {
 	struct resource		*cfg_res;
 	struct resource		*bus_range;
 	void __iomem		*cfg_base;
-	u32			no_bar_nbits;
 	u32			vendor_id;
 	u32			device_id;
 };
-- 
2.17.1


  parent reply	other threads:[~2020-05-08 13:07 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-08 13:06 [PATCH v3 0/4] PCI: cadence: Deprecate inbound/outbound specific bindings Kishon Vijay Abraham I
2020-05-08 13:06 ` [PATCH v3 1/4] dt-bindings: " Kishon Vijay Abraham I
2020-05-08 13:06 ` [PATCH v3 2/4] PCI: cadence: Remove "cdns,max-outbound-regions" DT property Kishon Vijay Abraham I
2020-05-08 13:06 ` [PATCH v3 3/4] PCI: cadence: Fix to read 32-bit Vendor ID/Device ID property from DT Kishon Vijay Abraham I
2020-05-08 13:06 ` Kishon Vijay Abraham I [this message]
2020-05-18 11:12   ` [PATCH v3 4/4] PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property Kishon Vijay Abraham I
2020-05-19 17:11   ` Rob Herring
2020-05-21  3:30     ` Kishon Vijay Abraham I
2020-05-21 12:13       ` Kishon Vijay Abraham I
2020-05-18 14:57 ` [PATCH v3 0/4] PCI: cadence: Deprecate inbound/outbound specific bindings Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200508130646.23939-5-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=tjoseph@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).