From: Jiaxun Yang <jiaxun.yang@flygoat.com>
To: linux-pci@vger.kernel.org
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Huacai Chen <chenhc@lemote.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Paul Burton <paulburton@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mips@vger.kernel.org
Subject: [PATCH v9 4/5] MIPS: DTS: Loongson64: Add PCI Controller Node
Date: Tue, 12 May 2020 15:43:58 +0800 [thread overview]
Message-ID: <20200512074413.3557835-4-jiaxun.yang@flygoat.com> (raw)
In-Reply-To: <20200512074413.3557835-1-jiaxun.yang@flygoat.com>
Add PCI Host controller node for Loongson64 with RS780E PCH dts.
Note that PCI interrupts are probed via legacy way, as different
machine have different interrupt arrangement, we can't cover all
of them in dt.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
arch/mips/boot/dts/loongson/rs780e-pch.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
index 8687c4f7370a..d0d5d60a8697 100644
--- a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
+++ b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
@@ -9,6 +9,18 @@ bus@10000000 {
0 0x40000000 0 0x40000000 0 0x40000000
0xfd 0xfe000000 0xfd 0xfe000000 0 0x2000000 /* PCI Config Space */>;
+ pci@1a000000 {
+ compatible = "loongson,rs780e-pci";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ reg = <0 0x1a000000 0 0x02000000>;
+
+ ranges = <0x01000000 0 0x00004000 0 0x18004000 0 0x00004000>,
+ <0x02000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+ };
+
isa {
compatible = "isa";
#address-cells = <2>;
--
2.26.2
next prev parent reply other threads:[~2020-05-12 7:47 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-27 6:05 [PATCH v6 0/5] Loongson PCI Generic Driver Jiaxun Yang
2020-04-27 6:05 ` [PATCH v6 1/5] PCI: Don't disable decoding when mmio_always_on is set Jiaxun Yang
2020-04-27 7:42 ` Philippe Mathieu-Daudé
2020-04-27 6:05 ` [PATCH v6 2/5] PCI: Add Loongson PCI Controller support Jiaxun Yang
2020-04-27 6:29 ` Huacai Chen
2020-04-27 6:46 ` Jiaxun Yang
2020-04-27 6:05 ` [PATCH v6 3/5] dt-bindings: Document Loongson PCI Host Controller Jiaxun Yang
2020-04-27 6:05 ` [PATCH v6 4/5] MIPS: DTS: Loongson64: Add PCI Controller Node Jiaxun Yang
2020-04-27 6:05 ` [PATCH v6 5/5] MIPS: Loongson64: Switch to generic PCI driver Jiaxun Yang
2020-04-28 1:14 ` [PATCH v7 0/5] Loongson PCI Generic Driver Jiaxun Yang
2020-04-28 1:14 ` [PATCH v7 1/5] PCI: Don't disable decoding when mmio_always_on is set Jiaxun Yang
2020-05-08 18:51 ` Bjorn Helgaas
2020-05-20 20:55 ` Rob Herring
2020-04-28 1:14 ` [PATCH v7 2/5] PCI: Add Loongson PCI Controller support Jiaxun Yang
2020-04-29 18:43 ` Rob Herring
2020-05-04 23:43 ` Bjorn Helgaas
2020-05-06 6:08 ` Jiaxun Yang
2020-04-28 1:14 ` [PATCH v7 3/5] dt-bindings: Document Loongson PCI Host Controller Jiaxun Yang
2020-04-28 1:14 ` [PATCH v7 4/5] MIPS: DTS: Loongson64: Add PCI Controller Node Jiaxun Yang
2020-04-28 1:14 ` [PATCH v7 5/5] MIPS: Loongson64: Switch to generic PCI driver Jiaxun Yang
2020-05-08 11:34 ` [PATCH v8 1/5] PCI: Don't disable decoding when mmio_always_on is set Jiaxun Yang
2020-05-08 11:34 ` [PATCH v8 2/5] PCI: Add Loongson PCI Controller support Jiaxun Yang
2020-05-08 17:17 ` Bjorn Helgaas
2020-05-08 17:28 ` Jiaxun Yang
2020-05-08 19:34 ` Bjorn Helgaas
2020-05-08 11:34 ` [PATCH v8 3/5] dt-bindings: Document Loongson PCI Host Controller Jiaxun Yang
2020-05-08 11:34 ` [PATCH v8 4/5] MIPS: DTS: Loongson64: Add PCI Controller Node Jiaxun Yang
2020-05-08 11:34 ` [PATCH v8 5/5] MIPS: Loongson64: Switch to generic PCI driver Jiaxun Yang
2020-05-08 22:04 ` Bjorn Helgaas
2020-05-12 7:43 ` [PATCH v9 1/5] PCI: Don't disable decoding when mmio_always_on is set Jiaxun Yang
2020-05-12 7:43 ` [PATCH v9 2/5] PCI: Add Loongson PCI Controller support Jiaxun Yang
2020-05-12 18:06 ` Bjorn Helgaas
2020-05-13 1:20 ` Jiaxun Yang
2020-05-13 15:05 ` Bjorn Helgaas
2020-05-12 7:43 ` [PATCH v9 3/5] dt-bindings: Document Loongson PCI Host Controller Jiaxun Yang
2020-05-12 7:43 ` Jiaxun Yang [this message]
2020-05-12 7:43 ` [PATCH v9 5/5] MIPS: Loongson64: Switch to generic PCI driver Jiaxun Yang
2020-05-14 13:16 ` [PATCH v10 1/5] PCI: Don't disable decoding when mmio_always_on is set Jiaxun Yang
2020-05-14 13:16 ` [PATCH v10 2/5] PCI: Add Loongson PCI Controller support Jiaxun Yang
2020-05-20 11:57 ` Jiaxun Yang
2020-05-22 13:10 ` Lorenzo Pieralisi
2020-05-22 13:32 ` Jiaxun Yang
2020-05-22 13:40 ` Lorenzo Pieralisi
2020-05-22 14:27 ` Thomas Bogendoerfer
2020-05-22 14:27 ` Thomas Bogendoerfer
2020-05-26 9:10 ` Lorenzo Pieralisi
2020-05-14 13:16 ` [PATCH v10 3/5] dt-bindings: Document Loongson PCI Host Controller Jiaxun Yang
2020-05-14 13:16 ` [PATCH v10 4/5] MIPS: DTS: Loongson64: Add PCI Controller Node Jiaxun Yang
2020-05-22 14:25 ` Thomas Bogendoerfer
2020-05-14 13:16 ` [PATCH v10 5/5] MIPS: Loongson64: Switch to generic PCI driver Jiaxun Yang
2020-05-22 14:25 ` Thomas Bogendoerfer
2020-05-22 15:22 ` Lorenzo Pieralisi
2020-05-22 22:36 ` Thomas Bogendoerfer
2020-05-26 9:12 ` Lorenzo Pieralisi
2020-05-26 9:14 ` Jiaxun Yang
2020-05-27 11:34 ` Thomas Bogendoerfer
2020-05-26 9:21 ` [PATCH v11 0/5] Loongson Generic PCI v11 Jiaxun Yang
2020-05-26 9:21 ` [PATCH v11 1/5] PCI: Don't disable decoding when mmio_always_on is set Jiaxun Yang
2020-05-26 9:21 ` [PATCH v11 2/5] PCI: Add Loongson PCI Controller support Jiaxun Yang
2020-05-26 9:21 ` [PATCH v11 3/5] dt-bindings: Document Loongson PCI Host Controller Jiaxun Yang
2020-05-26 9:21 ` [PATCH v11 4/5] MIPS: DTS: Loongson64: Add PCI Controller Node Jiaxun Yang
2020-05-26 9:21 ` [PATCH v11 5/5] MIPS: Loongson64: Switch to generic PCI driver Jiaxun Yang
2020-05-27 11:35 ` [PATCH v11 0/5] Loongson Generic PCI v11 Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200512074413.3557835-4-jiaxun.yang@flygoat.com \
--to=jiaxun.yang@flygoat.com \
--cc=bhelgaas@google.com \
--cc=chenhc@lemote.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=paulburton@kernel.org \
--cc=robh+dt@kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).