linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Arnd Bergmann <arnd@arndb.de>, Tom Joseph <tjoseph@cadence.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 03/14] PCI: cadence: Add support to use custom read and write accessors
Date: Wed, 20 May 2020 16:07:24 -0600	[thread overview]
Message-ID: <20200520220724.GA636352@bogus> (raw)
In-Reply-To: <20200506151429.12255-4-kishon@ti.com>

On Wed, May 06, 2020 at 08:44:18PM +0530, Kishon Vijay Abraham I wrote:
> Add support to use custom read and write accessors. Platforms that
> don't support half word or byte access or any other constraint
> while accessing registers can use this feature to populate custom
> read and write accessors. These custom accessors are used for both
> standard register access and configuration space register access of
> the PCIe host bridge.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  drivers/pci/controller/cadence/pcie-cadence.h | 107 +++++++++++++++---
>  1 file changed, 94 insertions(+), 13 deletions(-)

Actually, take back my R-by...

> 
> diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
> index df14ad002fe9..70b6b25153e8 100644
> --- a/drivers/pci/controller/cadence/pcie-cadence.h
> +++ b/drivers/pci/controller/cadence/pcie-cadence.h
> @@ -223,6 +223,11 @@ enum cdns_pcie_msg_routing {
>  	MSG_ROUTING_GATHER,
>  };
>  
> +struct cdns_pcie_ops {
> +	u32	(*read)(void __iomem *addr, int size);
> +	void	(*write)(void __iomem *addr, int size, u32 value);
> +};
> +
>  /**
>   * struct cdns_pcie - private data for Cadence PCIe controller drivers
>   * @reg_base: IO mapped register base
> @@ -239,7 +244,7 @@ struct cdns_pcie {
>  	int			phy_count;
>  	struct phy		**phy;
>  	struct device_link	**link;
> -	const struct cdns_pcie_common_ops *ops;
> +	const struct cdns_pcie_ops *ops;
>  };
>  
>  /**
> @@ -299,69 +304,145 @@ struct cdns_pcie_ep {
>  /* Register access */
>  static inline void cdns_pcie_writeb(struct cdns_pcie *pcie, u32 reg, u8 value)
>  {
> -	writeb(value, pcie->reg_base + reg);
> +	void __iomem *addr = pcie->reg_base + reg;
> +
> +	if (pcie->ops && pcie->ops->write) {
> +		pcie->ops->write(addr, 0x1, value);
> +		return;
> +	}
> +
> +	writeb(value, addr);
>  }
>  
>  static inline void cdns_pcie_writew(struct cdns_pcie *pcie, u32 reg, u16 value)
>  {
> -	writew(value, pcie->reg_base + reg);
> +	void __iomem *addr = pcie->reg_base + reg;
> +
> +	if (pcie->ops && pcie->ops->write) {
> +		pcie->ops->write(addr, 0x2, value);
> +		return;
> +	}
> +
> +	writew(value, addr);
>  }

cdns_pcie_writeb and cdns_pcie_writew are used, so remove them.

>  
>  static inline void cdns_pcie_writel(struct cdns_pcie *pcie, u32 reg, u32 value)
>  {
> -	writel(value, pcie->reg_base + reg);
> +	void __iomem *addr = pcie->reg_base + reg;
> +
> +	if (pcie->ops && pcie->ops->write) {
> +		pcie->ops->write(addr, 0x4, value);
> +		return;
> +	}
> +
> +	writel(value, addr);

writel isn't broken for you, so you don't need this either.

>  }
>  
>  static inline u32 cdns_pcie_readl(struct cdns_pcie *pcie, u32 reg)
>  {
> -	return readl(pcie->reg_base + reg);
> +	void __iomem *addr = pcie->reg_base + reg;
> +
> +	if (pcie->ops && pcie->ops->read)
> +		return pcie->ops->read(addr, 0x4);
> +
> +	return readl(addr);

And neither is readl.

>  }
>  
>  /* Root Port register access */
>  static inline void cdns_pcie_rp_writeb(struct cdns_pcie *pcie,
>  				       u32 reg, u8 value)
>  {
> -	writeb(value, pcie->reg_base + CDNS_PCIE_RP_BASE + reg);
> +	void __iomem *addr = pcie->reg_base + CDNS_PCIE_RP_BASE + reg;
> +
> +	if (pcie->ops && pcie->ops->write) {
> +		pcie->ops->write(addr, 0x1, value);
> +		return;
> +	}
> +
> +	writeb(value, addr);
>  }
>  
>  static inline void cdns_pcie_rp_writew(struct cdns_pcie *pcie,
>  				       u32 reg, u16 value)
>  {
> -	writew(value, pcie->reg_base + CDNS_PCIE_RP_BASE + reg);
> +	void __iomem *addr = pcie->reg_base + CDNS_PCIE_RP_BASE + reg;
> +
> +	if (pcie->ops && pcie->ops->write) {
> +		pcie->ops->write(addr, 0x2, value);
> +		return;
> +	}
> +
> +	writew(value, addr);

You removed 2 out of 3 calls to this. I think I'd just make the root 
port writes always be 32-bit. It is all just one time init stuff 
anyways.

Either rework the calls to assemble the data into 32-bits or keep these 
functions and do the RMW here.

>  }
>  
>  /* Endpoint Function register access */
>  static inline void cdns_pcie_ep_fn_writeb(struct cdns_pcie *pcie, u8 fn,
>  					  u32 reg, u8 value)
>  {
> -	writeb(value, pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg);
> +	void __iomem *addr = pcie->reg_base + CDNS_PCIE_EP_FUNC_BASE(fn) + reg;
> +
> +	if (pcie->ops && pcie->ops->write) {
> +		pcie->ops->write(addr, 0x1, value);
> +		return;
> +	}
> +
> +	writeb(value, addr);

Same for these EP functions. 

Unless there are places where doing a RMW is fundamentally broken like 
in config space (not counting the one time init stuff).

Rob

  parent reply	other threads:[~2020-05-20 22:07 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-06 15:14 [PATCH v4 00/14] Add PCIe support to TI's J721E SoC Kishon Vijay Abraham I
2020-05-06 15:14 ` [PATCH v4 01/14] PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path Kishon Vijay Abraham I
2020-05-20 20:59   ` Rob Herring
2020-05-06 15:14 ` [PATCH v4 02/14] linux/kernel.h: Add PTR_ALIGN_DOWN macro Kishon Vijay Abraham I
2020-05-20 21:00   ` Rob Herring
2020-05-06 15:14 ` [PATCH v4 03/14] PCI: cadence: Add support to use custom read and write accessors Kishon Vijay Abraham I
2020-05-20 21:02   ` Rob Herring
2020-05-20 22:07   ` Rob Herring [this message]
2020-05-21 13:33     ` Kishon Vijay Abraham I
2020-05-21 22:17       ` Rob Herring
2020-05-22  3:36         ` Kishon Vijay Abraham I
2020-05-06 15:14 ` [PATCH v4 04/14] PCI: cadence: Add support to start link and verify link status Kishon Vijay Abraham I
2020-05-20 21:06   ` Rob Herring
2020-05-06 15:14 ` [PATCH v4 05/14] PCI: cadence: Add read/write accessors to perform only 32-bit accesses Kishon Vijay Abraham I
2020-05-06 15:14 ` [PATCH v4 06/14] PCI: cadence: Allow pci_host_bridge to have custom pci_ops Kishon Vijay Abraham I
2020-05-06 15:14 ` [PATCH v4 07/14] PCI: cadence: Add new *ops* for CPU addr fixup Kishon Vijay Abraham I
2020-05-20 21:34   ` Rob Herring
2020-05-21 11:34     ` Kishon Vijay Abraham I
2020-05-22 16:45       ` Rob Herring
2020-05-23  1:24         ` Kishon Vijay Abraham I
2020-05-06 15:14 ` [PATCH v4 08/14] PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register Kishon Vijay Abraham I
2020-05-20 21:36   ` Rob Herring
2020-05-06 15:14 ` [PATCH v4 09/14] PCI: cadence: Add MSI-X support to Endpoint driver Kishon Vijay Abraham I
2020-05-06 15:14 ` [PATCH v4 10/14] dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC Kishon Vijay Abraham I
2020-05-06 15:14 ` [PATCH v4 11/14] dt-bindings: PCI: Add EP " Kishon Vijay Abraham I
2020-05-06 15:14 ` [PATCH v4 12/14] PCI: j721e: Add TI J721E PCIe driver Kishon Vijay Abraham I
2020-05-06 15:14 ` [PATCH v4 13/14] misc: pci_endpoint_test: Add J721E in pci_device_id table Kishon Vijay Abraham I
2020-05-20 22:12   ` Rob Herring
2020-05-06 15:14 ` [PATCH v4 14/14] MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe Kishon Vijay Abraham I
2020-05-20 22:12   ` Rob Herring
2020-05-18 11:14 ` [PATCH v4 00/14] Add PCIe support to TI's J721E SoC Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200520220724.GA636352@bogus \
    --to=robh@kernel.org \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=tjoseph@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).