Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Rob Herring <robh@kernel.org>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Will Deacon <will@kernel.org>
Subject: [PATCH 03/15] PCI: host-common: Use struct pci_host_bridge.windows list directly
Date: Fri, 22 May 2020 17:48:20 -0600
Message-ID: <20200522234832.954484-4-robh@kernel.org> (raw)
In-Reply-To: <20200522234832.954484-1-robh@kernel.org>

There's no need to create a temporary resource list and then splice it to
struct pci_host_bridge.windows list. Just use pci_host_bridge.windows
directly. The necessary clean-up is already handled by the PCI core.

Cc: Will Deacon <will@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
---
 drivers/pci/controller/pci-host-common.c | 36 ++++++++----------------
 1 file changed, 11 insertions(+), 25 deletions(-)

diff --git a/drivers/pci/controller/pci-host-common.c b/drivers/pci/controller/pci-host-common.c
index 953de57f6c57..f8f71d99e427 100644
--- a/drivers/pci/controller/pci-host-common.c
+++ b/drivers/pci/controller/pci-host-common.c
@@ -21,7 +21,7 @@ static void gen_pci_unmap_cfg(void *ptr)
 }
 
 static struct pci_config_window *gen_pci_init(struct device *dev,
-		struct list_head *resources, const struct pci_ecam_ops *ops)
+		struct pci_host_bridge *bridge, const struct pci_ecam_ops *ops)
 {
 	int err;
 	struct resource cfgres;
@@ -29,31 +29,25 @@ static struct pci_config_window *gen_pci_init(struct device *dev,
 	struct pci_config_window *cfg;
 
 	/* Parse our PCI ranges and request their resources */
-	err = pci_parse_request_of_pci_ranges(dev, resources, NULL, &bus_range);
+	err = pci_parse_request_of_pci_ranges(dev, &bridge->windows, NULL, &bus_range);
 	if (err)
 		return ERR_PTR(err);
 
 	err = of_address_to_resource(dev->of_node, 0, &cfgres);
 	if (err) {
 		dev_err(dev, "missing \"reg\" property\n");
-		goto err_out;
+		return ERR_PTR(err);
 	}
 
 	cfg = pci_ecam_create(dev, &cfgres, bus_range, ops);
-	if (IS_ERR(cfg)) {
-		err = PTR_ERR(cfg);
-		goto err_out;
-	}
+	if (IS_ERR(cfg))
+		return cfg;
 
 	err = devm_add_action_or_reset(dev, gen_pci_unmap_cfg, cfg);
-	if (err) {
-		goto err_out;
-	}
-	return cfg;
+	if (err)
+		return ERR_PTR(err);
 
-err_out:
-	pci_free_resource_list(resources);
-	return ERR_PTR(err);
+	return cfg;
 }
 
 int pci_host_common_probe(struct platform_device *pdev)
@@ -61,9 +55,7 @@ int pci_host_common_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct pci_host_bridge *bridge;
 	struct pci_config_window *cfg;
-	struct list_head resources;
 	const struct pci_ecam_ops *ops;
-	int ret;
 
 	ops = of_device_get_match_data(&pdev->dev);
 	if (!ops)
@@ -76,7 +68,7 @@ int pci_host_common_probe(struct platform_device *pdev)
 	of_pci_check_probe_only();
 
 	/* Parse and map our Configuration Space windows */
-	cfg = gen_pci_init(dev, &resources, ops);
+	cfg = gen_pci_init(dev, bridge, ops);
 	if (IS_ERR(cfg))
 		return PTR_ERR(cfg);
 
@@ -84,7 +76,6 @@ int pci_host_common_probe(struct platform_device *pdev)
 	if (!pci_has_flag(PCI_PROBE_ONLY))
 		pci_add_flags(PCI_REASSIGN_ALL_BUS);
 
-	list_splice_init(&resources, &bridge->windows);
 	bridge->dev.parent = dev;
 	bridge->sysdata = cfg;
 	bridge->busnr = cfg->busr.start;
@@ -92,14 +83,9 @@ int pci_host_common_probe(struct platform_device *pdev)
 	bridge->map_irq = of_irq_parse_and_map_pci;
 	bridge->swizzle_irq = pci_common_swizzle;
 
-	ret = pci_host_probe(bridge);
-	if (ret < 0) {
-		pci_free_resource_list(&resources);
-		return ret;
-	}
-
 	platform_set_drvdata(pdev, bridge->bus);
-	return 0;
+
+	return pci_host_probe(bridge);
 }
 EXPORT_SYMBOL_GPL(pci_host_common_probe);
 
-- 
2.25.1


  parent reply index

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-22 23:48 [PATCH 00/15] PCI controller probe cleanups Rob Herring
2020-05-22 23:48 ` [PATCH 01/15] PCI: cadence: Use struct pci_host_bridge.windows list directly Rob Herring
2020-05-22 23:48 ` [PATCH 02/15] PCI: mvebu: " Rob Herring
2020-05-22 23:48 ` Rob Herring [this message]
2020-05-22 23:48 ` [PATCH 04/15] PCI: brcmstb: Use pci_host_probe() to register host Rob Herring
2020-05-22 23:48 ` [PATCH 05/15] PCI: mobiveil: " Rob Herring
2020-05-22 23:48 ` [PATCH 06/15] PCI: tegra: " Rob Herring
2020-05-22 23:48 ` [PATCH 07/15] PCI: v3: " Rob Herring
2020-05-25 11:38   ` Linus Walleij
2020-05-22 23:48 ` [PATCH 08/15] PCI: versatile: " Rob Herring
2020-05-22 23:48 ` [PATCH 09/15] PCI: xgene: " Rob Herring
2020-05-22 23:48 ` [PATCH 10/15] PCI: altera: " Rob Herring
2020-05-22 23:48 ` [PATCH 11/15] PCI: iproc: " Rob Herring
2020-05-22 23:48 ` [PATCH 12/15] PCI: rcar: " Rob Herring
2020-05-25  8:31   ` Geert Uytterhoeven
2020-05-22 23:48 ` [PATCH 13/15] PCI: rockchip: " Rob Herring
2020-05-22 23:48 ` [PATCH 14/15] PCI: xilinx-nwl: " Rob Herring
2020-05-25  6:44   ` Michal Simek
2020-05-22 23:48 ` [PATCH 15/15] PCI: xilinx: " Rob Herring
2020-05-25  6:44   ` Michal Simek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200522234832.954484-4-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git