linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Xiang Zheng <zhengxiang9@huawei.com>
Cc: bhelgaas@google.com, willy@infradead.org,
	wangxiongfeng2@huawei.com, wanghaibin.wang@huawei.com,
	guoheyi@huawei.com, yebiaoxiang@huawei.com,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	rjw@rjwysocki.net, tglx@linutronix.de, guohanjun@huawei.com,
	yangyingliang@huawei.com
Subject: Re: [PATCH v3] PCI: Lock the pci_cfg_wait queue for the consistency of data
Date: Thu, 25 Jun 2020 18:24:30 -0500	[thread overview]
Message-ID: <20200625232430.GA2739986@bjorn-Precision-5520> (raw)
In-Reply-To: <20200624232309.GA2601999@bjorn-Precision-5520>

On Wed, Jun 24, 2020 at 06:23:09PM -0500, Bjorn Helgaas wrote:
> On Tue, Dec 10, 2019 at 11:15:27AM +0800, Xiang Zheng wrote:
> > 7ea7e98fd8d0 ("PCI: Block on access to temporarily unavailable pci
> > device") suggests that the "pci_lock" is sufficient, and all the
> > callers of pci_wait_cfg() are wrapped with the "pci_lock".
> > 
> > However, since the commit cdcb33f98244 ("PCI: Avoid possible deadlock on
> > pci_lock and p->pi_lock") merged, the accesses to the pci_cfg_wait queue
> > are not safe anymore. This would cause kernel panic in a very low chance
> > (See more detailed information from the below link). A "pci_lock" is
> > insufficient and we need to hold an additional queue lock while read/write
> > the wait queue.
> > 
> > So let's use the add_wait_queue()/remove_wait_queue() instead of
> > __add_wait_queue()/__remove_wait_queue(). Also move the wait queue
> > functionality around the "schedule()" function to avoid reintroducing
> > the deadlock addressed by "cdcb33f98244".
> 
> I see that add_wait_queue() acquires the wq_head->lock, while
> __add_wait_queue() does not.
> 
> But I don't understand why the existing pci_lock is insufficient.  
> pci_cfg_wait is only used in pci_wait_cfg() and
> pci_cfg_access_unlock().
> 
> In pci_wait_cfg(), both __add_wait_queue() and __remove_wait_queue()
> are called while holding pci_lock, so that doesn't seem like the
> problem.
> 
> In pci_cfg_access_unlock(), we have:
> 
>   pci_cfg_access_unlock
>     wake_up_all(&pci_cfg_wait)
>       __wake_up(&pci_cfg_wait, ...)
>         __wake_up_common_lock(&pci_cfg_wait, ...)
> 	  spin_lock(&pci_cfg_wait->lock)
> 	  __wake_up_common(&pci_cfg_wait, ...)
> 	    list_for_each_entry_safe_from(...)
> 	      list_add_tail(...)                <-- problem?
> 	  spin_unlock(&pci_cfg_wait->lock)
> 
> Is the problem that the wake_up_all() modifies the pci_cfg_wait list
> without holding pci_lock?
> 
> If so, I don't quite see how the patch below fixes it.  Oh, wait,
> maybe I do ... by using add_wait_queue(), we protect the list using
> the *same* lock used by __wake_up_common_lock.  Is that it?

Any reaction to the following?  Certainly not as optimized, but also a
little less magic and more in the mainstream of wait_event/wake_up
usage.

I don't claim any real wait queue knowledge and haven't tested it.
There are only a handful of __add_wait_queue() users compared with
over 1600 users of wait_event() and variants, and I don't like being
such a special case.

diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 79c4a2ef269a..7c2222bddbff 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -205,16 +205,11 @@ static DECLARE_WAIT_QUEUE_HEAD(pci_cfg_wait);
 
 static noinline void pci_wait_cfg(struct pci_dev *dev)
 {
-	DECLARE_WAITQUEUE(wait, current);
-
-	__add_wait_queue(&pci_cfg_wait, &wait);
 	do {
-		set_current_state(TASK_UNINTERRUPTIBLE);
 		raw_spin_unlock_irq(&pci_lock);
-		schedule();
+		wait_event(pci_cfg_wait, !dev->block_cfg_access);
 		raw_spin_lock_irq(&pci_lock);
 	} while (dev->block_cfg_access);
-	__remove_wait_queue(&pci_cfg_wait, &wait);
 }
 
 /* Returns 0 on success, negative values indicate error. */

  reply	other threads:[~2020-06-25 23:24 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-10  3:15 [PATCH v3] PCI: Lock the pci_cfg_wait queue for the consistency of data Xiang Zheng
2020-06-24 23:23 ` Bjorn Helgaas
2020-06-24 23:23 ` Bjorn Helgaas
2020-06-25 23:24   ` Bjorn Helgaas [this message]
2020-06-28  4:18     ` Xiang Zheng
2020-06-28 16:14       ` Bjorn Helgaas
2020-07-02  9:41         ` Xiang Zheng
2020-06-28  4:17   ` Xiang Zheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200625232430.GA2739986@bjorn-Precision-5520 \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=guohanjun@huawei.com \
    --cc=guoheyi@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=tglx@linutronix.de \
    --cc=wanghaibin.wang@huawei.com \
    --cc=wangxiongfeng2@huawei.com \
    --cc=willy@infradead.org \
    --cc=yangyingliang@huawei.com \
    --cc=yebiaoxiang@huawei.com \
    --cc=zhengxiang9@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).