Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Saheed Olayemi Bolarinwa <refactormyself@gmail.com>
To: helgaas@kernel.org
Cc: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>,
	bjorn@helgaas.com, Lukas Wunner <lukas@wunner.de>,
	skhan@linuxfoundation.org, linux-pci@vger.kernel.org,
	linux-kernel-mentees@lists.linuxfoundation.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 5/13] PCI: pciehp: Check the return value of pcie_capability_read_*()
Date: Wed,  8 Jul 2020 00:03:16 +0200
Message-ID: <20200707220324.8425-6-refactormyself@gmail.com> (raw)
In-Reply-To: <20200707220324.8425-1-refactormyself@gmail.com>

From: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>

On any failure pcie_capability_read_word() sets it's last parameter, *val
to 0. If pci_config_read_word() fails the *val is reset to 0. Any function
which check only for a frabricated ~0 which fail in this case.

Include a check on the return value of pcie_capability_read_word() to
confirm success or failure.

Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>

---
 drivers/pci/hotplug/pciehp_hpc.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 53433b37e181..5af281d97d4f 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -86,10 +86,11 @@ static int pcie_poll_cmd(struct controller *ctrl, int timeout)
 {
 	struct pci_dev *pdev = ctrl_dev(ctrl);
 	u16 slot_status;
+	int ret;
 
 	do {
-		pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
-		if (slot_status == (u16) ~0) {
+		ret = pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
+		if (ret || (slot_status == (u16) ~0)) {
 			ctrl_info(ctrl, "%s: no response from device\n",
 				  __func__);
 			return 0;
@@ -156,6 +157,7 @@ static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
 {
 	struct pci_dev *pdev = ctrl_dev(ctrl);
 	u16 slot_ctrl_orig, slot_ctrl;
+	int ret;
 
 	mutex_lock(&ctrl->ctrl_lock);
 
@@ -164,8 +166,8 @@ static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
 	 */
 	pcie_wait_cmd(ctrl);
 
-	pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
-	if (slot_ctrl == (u16) ~0) {
+	ret = pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
+	if (ret || (slot_ctrl == (u16) ~0)) {
 		ctrl_info(ctrl, "%s: no response from device\n", __func__);
 		goto out;
 	}
@@ -430,7 +432,7 @@ void pciehp_get_latch_status(struct controller *ctrl, u8 *status)
  * removed immediately after the check so the caller may need to take
  * this into account.
  *
- * It the hotplug controller itself is not available anymore returns
+ * If the hotplug controller itself is not available anymore returns
  * %-ENODEV.
  */
 int pciehp_card_present(struct controller *ctrl)
@@ -591,8 +593,8 @@ static irqreturn_t pciehp_isr(int irq, void *dev_id)
 	}
 
 read_status:
-	pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &status);
-	if (status == (u16) ~0) {
+	ret = pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &status);
+	if (ret || (status == (u16) ~0)) {
 		ctrl_info(ctrl, "%s: no response from device\n", __func__);
 		if (parent)
 			pm_runtime_put(parent);
-- 
2.18.2


  reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-07 22:03 [PATCH 0/13] PCI: Remove '*val = 0' from pcie_capability_read_*() Saheed Olayemi Bolarinwa
2020-07-07 22:03 ` Saheed Olayemi Bolarinwa [this message]
2020-07-07 22:03 ` [PATCH 6/13] PCI: pciehp: Make "Power On" the default Saheed Olayemi Bolarinwa
2020-07-07 22:03 ` [PATCH 8/13] PCI: pciehp: Check return value of pcie_capability_read_*() Saheed Olayemi Bolarinwa
2020-07-07 22:03 ` [PATCH 9/13] PCI: " Saheed Olayemi Bolarinwa
2020-07-07 22:03 ` [PATCH 10/13] PCI/PM: " Saheed Olayemi Bolarinwa
2020-07-07 22:03 ` [PATCH 12/13] PCI/ASPM: Check the " Saheed Olayemi Bolarinwa
2020-07-07 22:03 ` [PATCH 13/13] PCI: Remove '*val = 0' from pcie_capability_read_*() Saheed Olayemi Bolarinwa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200707220324.8425-6-refactormyself@gmail.com \
    --to=refactormyself@gmail.com \
    --cc=bjorn@helgaas.com \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel-mentees@lists.linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=skhan@linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git