Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To: Sean V Kelley <sean.v.kelley@intel.com>
Cc: <bhelgaas@google.com>, <rjw@rjwysocki.net>,
	<ashok.raj@kernel.org>, <tony.luck@intel.com>,
	<sathyanarayanan.kuppuswamy@linux.intel.com>,
	<linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [RFC PATCH 4/9] PCI/AER: Extend AER error handling to RCECs
Date: Mon, 27 Jul 2020 15:04:26 +0100
Message-ID: <20200727150426.00005cde@huawei.com> (raw)
In-Reply-To: <20200724172223.145608-5-sean.v.kelley@intel.com>

On Fri, 24 Jul 2020 10:22:18 -0700
Sean V Kelley <sean.v.kelley@intel.com> wrote:

> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> Currently the kernel does not handle AER errors for Root Complex integrated
> End Points (RCiEPs)[0]. These devices sit on a root bus within the Root Complex
> (RC). AER handling is performed by a Root Complex Event Collector (RCEC) [1]
> which is a effectively a type of RCiEP on the same root bus.
> 
> For an RCEC (technically not a Bridge), error messages "received" from
> associated RCiEPs must be enabled for "transmission" in order to cause a
> System Error via the Root Control register or (when the Advanced Error
> Reporting Capability is present) reporting via the Root Error Command
> register and logging in the Root Error Status register and Error Source
> Identification register.
> 
> In addition to the defined OS level handling of the reset flow for the
> associated RCiEPs of an RCEC, it is possible to also have a firmware first
> model. In that case there is no need to take any actions on the RCEC because
> the firmware is responsible for them. This is true where APEI [2] is used
> to report the AER errors via a GHES[v2] HEST entry [3] and relevant
> AER CPER record [4] and Firmware First handling is in use.
> 
> We effectively end up with two different types of discovery for
> purposes of handling AER errors:
> 
> 1) Normal bus walk - we pass the downstream port above a bus to which
> the device is attached and it walks everything below that point.
> 
> 2) An RCiEP with no visible association with an RCEC as there is no need to
> walk devices. In that case, the flow is to just call the callbacks for the actual
> device.
> 
> A new walk function, similar to pci_bus_walk is provided that takes a pci_dev
> instead of a bus. If that dev corresponds to a downstream port it will walk
> the subordinate bus of that downstream port. If the dev does not then it
> will call the function on that device alone.
> 
> [0] ACPI PCI Express Base Specification 5.0-1 1.3.2.3 Root Complex Integrated
>     Endpoint Rules.
> [1] ACPI PCI Express Base Specification 5.0-1 6.2 Error Signalling and Logging
> [2] ACPI Specification 6.3 Chapter 18 ACPI Platform Error Interface (APEI)
> [3] ACPI Specification 6.3 18.2.3.7 Generic Hardware Error Source
> [4] UEFI Specification 2.8, N.2.7 PCI Express Error Section
> 
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
> ---
...


>  	pci_dbg(dev, "broadcast resume message\n");
> -	pci_walk_bus(bus, report_resume, &status);
> +	pci_walk_dev_affected(dev, report_resume, &status);
>  
> -	pci_aer_clear_device_status(dev);
> -	pci_aer_clear_nonfatal_status(dev);

This code had changed a little in Bjorn's pci/next branch so do a rebase on that
before v2.

> +	if ((pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
> +	     pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM ||
> +	     pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC)) {
> +		pci_aer_clear_device_status(dev);
> +		pci_aer_clear_nonfatal_status(dev);
> +	}
>  	pci_info(dev, "device recovery successful\n");
>  	return status;
>  


  parent reply index

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-24 17:22 [RFC PATCH 0/9] Add RCEC handling to PCI/AER Sean V Kelley
2020-07-24 17:22 ` [RFC PATCH 1/9] pci_ids: Add class code and extended capability for RCEC Sean V Kelley
2020-07-27 10:00   ` Jonathan Cameron
2020-07-27 10:21     ` Jonathan Cameron
2020-07-27 15:22       ` Sean V Kelley
2020-07-24 17:22 ` [RFC PATCH 2/9] PCI: Extend Root Port Driver to support RCEC Sean V Kelley
2020-07-27 12:30   ` Jonathan Cameron
2020-07-27 15:05     ` Sean V Kelley
2020-07-24 17:22 ` [RFC PATCH 3/9] PCI/portdrv: Add pcie_walk_rcec() to walk RCiEPs associated with RCEC Sean V Kelley
2020-07-27 10:49   ` Jonathan Cameron
2020-07-27 15:21     ` Sean V Kelley
2020-07-24 17:22 ` [RFC PATCH 4/9] PCI/AER: Extend AER error handling to RCECs Sean V Kelley
2020-07-27 11:00   ` Jonathan Cameron
2020-07-27 14:58     ` Sean V Kelley
2020-07-27 14:04   ` Jonathan Cameron [this message]
2020-07-27 15:00     ` Sean V Kelley
2020-07-24 17:22 ` [RFC PATCH 5/9] PCI/AER: Apply function level reset to RCiEP on fatal error Sean V Kelley
2020-07-27 11:17   ` Jonathan Cameron
2020-07-28 13:27     ` Zhuo, Qiuxu
2020-07-28 16:14       ` Sean V Kelley
2020-07-28 17:02         ` Jonathan Cameron
2020-07-28 17:42           ` Sean V Kelley
2020-07-24 17:22 ` [RFC PATCH 6/9] PCI: Add 'rcec' field to pci_dev for associated RCiEPs Sean V Kelley
2020-07-27 11:23   ` Jonathan Cameron
2020-07-27 15:39     ` Sean V Kelley
2020-07-27 16:11     ` Jonathan Cameron
2020-07-27 16:28       ` Sean V Kelley
2020-07-24 17:22 ` [RFC PATCH 7/9] PCI/AER: Add RCEC AER handling Sean V Kelley
2020-07-27 12:22   ` Jonathan Cameron
2020-07-27 15:19     ` Sean V Kelley
2020-07-27 17:14       ` Jonathan Cameron
2020-07-24 17:22 ` [RFC PATCH 8/9] PCI/PME: Add RCEC PME handling Sean V Kelley
2020-08-04  8:35   ` Jay Fang
2020-08-04  9:47     ` Jonathan Cameron
2020-07-24 17:22 ` [RFC PATCH 9/9] PCI/AER: Add RCEC AER error injection support Sean V Kelley
2020-07-27 12:37 ` [RFC PATCH 0/9] Add RCEC handling to PCI/AER Jonathan Cameron
2020-07-27 14:56   ` Sean V Kelley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200727150426.00005cde@huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=ashok.raj@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    --cc=sean.v.kelley@intel.com \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git