Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Jon Hunter <jonathanh@nvidia.com>,
	linux-pci@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: Re: [PATCH v2 1/2] dt-bindings: pci: tegra: Remove PLL power supplies
Date: Tue, 28 Jul 2020 11:20:55 +0100
Message-ID: <20200728102055.GA32448@e121166-lin.cambridge.arm.com> (raw)
In-Reply-To: <20200623145528.1658337-1-thierry.reding@gmail.com>

On Tue, Jun 23, 2020 at 04:55:27PM +0200, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
> 
> The XUSB pad controller, which provides access to various USB, PCI and
> SATA pads (or PHYs), needs to bring up the PLLs associated with these
> pads. In order to properly do so, it needs to control the power supplied
> to these PLLs.
> 
> Remove the PLL power supplies from the PCIe controller because it does
> not need direct access to them. Instead it will only use the configured
> pads provided by the XUSB pad controller.
> 
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
> Hi Rob,
> 
> I already made this change as part of the conversion series, but wanted
> to send this out as part of this subseries since it addresses a fairly
> long-standing issue that I'd like to clean up irrespective of the DT
> binding conversion. Since it looks like the conversion series will take
> a bit longer, I think it makes sense to send this out separately.

Applied the series to pci/tegra, thanks.

Lorenzo

> Thierry
> 
>  .../devicetree/bindings/pci/nvidia,tegra20-pcie.txt  | 12 ------------
>  1 file changed, 12 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
> index 7939bca47861..d099f3476ccc 100644
> --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
> @@ -112,28 +112,16 @@ Power supplies for Tegra124:
>  - Required:
>    - avddio-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
>    - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
> -  - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
> -    supply 1.05 V.
>    - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
>      Must supply 3.3 V.
> -  - hvdd-pex-pll-e-supply: High-voltage supply for PLLE (shared with USB3).
> -    Must supply 3.3 V.
>    - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
>      supply 2.8-3.3 V.
> -  - avdd-pll-erefe-supply: Power supply for PLLE (shared with USB3). Must
> -    supply 1.05 V.
>  
>  Power supplies for Tegra210:
>  - Required:
> -  - avdd-pll-uerefe-supply: Power supply for PLLE (shared with USB3). Must
> -    supply 1.05 V.
>    - hvddio-pex-supply: High-voltage supply for PCIe I/O and PCIe output
>      clocks. Must supply 1.8 V.
>    - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
> -  - dvdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
> -    supply 1.05 V.
> -  - hvdd-pex-pll-e-supply: High-voltage supply for PLLE (shared with USB3).
> -    Must supply 3.3 V.
>    - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
>      supply 1.8 V.
>  
> -- 
> 2.27.0
> 

      parent reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-23 14:55 Thierry Reding
2020-06-23 14:55 ` [PATCH v2 2/2] PCI: " Thierry Reding
2020-07-16 13:00   ` Thierry Reding
2020-07-16 14:07     ` Lorenzo Pieralisi
2020-07-16 15:06       ` Thierry Reding
2020-07-27 16:21   ` Rob Herring
2020-07-27 17:21     ` Thierry Reding
2020-07-27 17:43       ` Rob Herring
2020-07-16 12:59 ` [PATCH v2 1/2] dt-bindings: pci: " Thierry Reding
2020-07-17 10:48   ` Lorenzo Pieralisi
2020-07-27 16:17 ` Rob Herring
2020-07-28 10:20 ` Lorenzo Pieralisi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200728102055.GA32448@e121166-lin.cambridge.arm.com \
    --to=lorenzo.pieralisi@arm.com \
    --cc=bhelgaas@google.com \
    --cc=jonathanh@nvidia.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git