linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-usb@vger.kernel.org
Cc: Michael Jamet <michael.jamet@intel.com>,
	Yehezkel Bernat <YehezkelShB@gmail.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Andreas Noever <andreas.noever@gmail.com>,
	Rajmohan Mani <rajmohan.mani@intel.com>,
	Dana Alkattan <dana.alkattan@intel.com>,
	Lukas Wunner <lukas@wunner.de>,
	"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
	Bjorn Helgaas <bhelgaas@google.com>, Len Brown <lenb@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-acpi@vger.kernel.org, linux-pci@vger.kernel.org
Subject: [PATCH 12/19] thunderbolt: Set port configured for both ends of the link
Date: Wed, 19 Aug 2020 14:58:58 +0300	[thread overview]
Message-ID: <20200819115905.59834-13-mika.westerberg@linux.intel.com> (raw)
In-Reply-To: <20200819115905.59834-1-mika.westerberg@linux.intel.com>

Both ends of the link needs to have this set. Otherwise the link is not
re-established properly after sleep. Now since it is possible to have
mixed USB4 and Thunderbolt 1, 2 and 3 devices we need to split the link
configuration functionality to happen per port so we can pick the
correct implementation.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/thunderbolt/lc.c     | 48 +++++--------------
 drivers/thunderbolt/switch.c | 33 ++++++++++---
 drivers/thunderbolt/tb.h     |  8 ++--
 drivers/thunderbolt/usb4.c   | 92 +++++++++++++++++-------------------
 4 files changed, 87 insertions(+), 94 deletions(-)

diff --git a/drivers/thunderbolt/lc.c b/drivers/thunderbolt/lc.c
index b2f62ba0421d..5c209a570360 100644
--- a/drivers/thunderbolt/lc.c
+++ b/drivers/thunderbolt/lc.c
@@ -45,7 +45,7 @@ static int find_port_lc_cap(struct tb_port *port)
 	return sw->cap_lc + start + phys * size;
 }
 
-static int tb_lc_configure_lane(struct tb_port *port, bool configure)
+static int tb_lc_set_port_configured(struct tb_port *port, bool configured)
 {
 	bool upstream = tb_is_upstream_port(port);
 	struct tb_switch *sw = port->sw;
@@ -69,7 +69,7 @@ static int tb_lc_configure_lane(struct tb_port *port, bool configure)
 	else
 		lane = TB_LC_SX_CTRL_L2C;
 
-	if (configure) {
+	if (configured) {
 		ctrl |= lane;
 		if (upstream)
 			ctrl |= TB_LC_SX_CTRL_UPSTREAM;
@@ -83,49 +83,25 @@ static int tb_lc_configure_lane(struct tb_port *port, bool configure)
 }
 
 /**
- * tb_lc_configure_link() - Let LC know about configured link
- * @sw: Switch that is being added
+ * tb_lc_configure_port() - Let LC know about configured port
+ * @port: Port that is set as configured
  *
- * Informs LC of both parent switch and @sw that there is established
- * link between the two.
+ * Sets the port configured for power management purposes.
  */
-int tb_lc_configure_link(struct tb_switch *sw)
+int tb_lc_configure_port(struct tb_port *port)
 {
-	struct tb_port *up, *down;
-	int ret;
-
-	up = tb_upstream_port(sw);
-	down = tb_port_at(tb_route(sw), tb_to_switch(sw->dev.parent));
-
-	/* Configure parent link toward this switch */
-	ret = tb_lc_configure_lane(down, true);
-	if (ret)
-		return ret;
-
-	/* Configure upstream link from this switch to the parent */
-	ret = tb_lc_configure_lane(up, true);
-	if (ret)
-		tb_lc_configure_lane(down, false);
-
-	return ret;
+	return tb_lc_set_port_configured(port, true);
 }
 
 /**
- * tb_lc_unconfigure_link() - Let LC know about unconfigured link
- * @sw: Switch to unconfigure
+ * tb_lc_unconfigure_port() - Let LC know about unconfigured port
+ * @port: Port that is set as configured
  *
- * Informs LC of both parent switch and @sw that the link between the
- * two does not exist anymore.
+ * Sets the port unconfigured for power management purposes.
  */
-void tb_lc_unconfigure_link(struct tb_switch *sw)
+void tb_lc_unconfigure_port(struct tb_port *port)
 {
-	struct tb_port *up, *down;
-
-	up = tb_upstream_port(sw);
-	down = tb_port_at(tb_route(sw), tb_to_switch(sw->dev.parent));
-
-	tb_lc_configure_lane(up, false);
-	tb_lc_configure_lane(down, false);
+	tb_lc_set_port_configured(port, false);
 }
 
 /**
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index ecc47ea81bb6..1c45f8baf487 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -2321,12 +2321,24 @@ void tb_switch_lane_bonding_disable(struct tb_switch *sw)
  */
 int tb_switch_configure_link(struct tb_switch *sw)
 {
+	struct tb_port *up, *down;
+	int ret;
+
 	if (!tb_route(sw) || tb_switch_is_icm(sw))
 		return 0;
 
-	if (tb_switch_is_usb4(sw))
-		return usb4_switch_configure_link(sw);
-	return tb_lc_configure_link(sw);
+	up = tb_upstream_port(sw);
+	if (tb_switch_is_usb4(up->sw))
+		ret = usb4_port_configure(up);
+	else
+		ret = tb_lc_configure_port(up);
+	if (ret)
+		return ret;
+
+	down = up->remote;
+	if (tb_switch_is_usb4(down->sw))
+		return usb4_port_configure(down);
+	return tb_lc_configure_port(down);
 }
 
 /**
@@ -2338,15 +2350,24 @@ int tb_switch_configure_link(struct tb_switch *sw)
  */
 void tb_switch_unconfigure_link(struct tb_switch *sw)
 {
+	struct tb_port *up, *down;
+
 	if (sw->is_unplugged)
 		return;
 	if (!tb_route(sw) || tb_switch_is_icm(sw))
 		return;
 
-	if (tb_switch_is_usb4(sw))
-		usb4_switch_unconfigure_link(sw);
+	up = tb_upstream_port(sw);
+	if (tb_switch_is_usb4(up->sw))
+		usb4_port_unconfigure(up);
+	else
+		tb_lc_unconfigure_port(up);
+
+	down = up->remote;
+	if (tb_switch_is_usb4(down->sw))
+		usb4_port_unconfigure(down);
 	else
-		tb_lc_unconfigure_link(sw);
+		tb_lc_unconfigure_port(down);
 }
 
 /**
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index dcdc886412f5..082ae9da4cbc 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -846,8 +846,8 @@ int tb_drom_read(struct tb_switch *sw);
 int tb_drom_read_uid_only(struct tb_switch *sw, u64 *uid);
 
 int tb_lc_read_uuid(struct tb_switch *sw, u32 *uuid);
-int tb_lc_configure_link(struct tb_switch *sw);
-void tb_lc_unconfigure_link(struct tb_switch *sw);
+int tb_lc_configure_port(struct tb_port *port);
+void tb_lc_unconfigure_port(struct tb_port *port);
 int tb_lc_set_sleep(struct tb_switch *sw);
 bool tb_lc_lane_bonding_possible(struct tb_switch *sw);
 bool tb_lc_dp_sink_query(struct tb_switch *sw, struct tb_port *in);
@@ -902,8 +902,6 @@ int usb4_switch_setup(struct tb_switch *sw);
 int usb4_switch_read_uid(struct tb_switch *sw, u64 *uid);
 int usb4_switch_drom_read(struct tb_switch *sw, unsigned int address, void *buf,
 			  size_t size);
-int usb4_switch_configure_link(struct tb_switch *sw);
-void usb4_switch_unconfigure_link(struct tb_switch *sw);
 bool usb4_switch_lane_bonding_possible(struct tb_switch *sw);
 int usb4_switch_set_sleep(struct tb_switch *sw);
 int usb4_switch_nvm_sector_size(struct tb_switch *sw);
@@ -921,6 +919,8 @@ struct tb_port *usb4_switch_map_usb3_down(struct tb_switch *sw,
 					  const struct tb_port *port);
 
 int usb4_port_unlock(struct tb_port *port);
+int usb4_port_configure(struct tb_port *port);
+void usb4_port_unconfigure(struct tb_port *port);
 int usb4_port_enumerate_retimers(struct tb_port *port);
 
 int usb4_port_retimer_read(struct tb_port *port, u8 index, u8 reg, void *buf,
diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c
index dd601a6db23c..b2677427789f 100644
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -338,54 +338,6 @@ int usb4_switch_drom_read(struct tb_switch *sw, unsigned int address, void *buf,
 				 usb4_switch_drom_read_block, sw);
 }
 
-static int usb4_set_port_configured(struct tb_port *port, bool configured)
-{
-	int ret;
-	u32 val;
-
-	ret = tb_port_read(port, &val, TB_CFG_PORT,
-			   port->cap_usb4 + PORT_CS_19, 1);
-	if (ret)
-		return ret;
-
-	if (configured)
-		val |= PORT_CS_19_PC;
-	else
-		val &= ~PORT_CS_19_PC;
-
-	return tb_port_write(port, &val, TB_CFG_PORT,
-			     port->cap_usb4 + PORT_CS_19, 1);
-}
-
-/**
- * usb4_switch_configure_link() - Set upstream USB4 link configured
- * @sw: USB4 router
- *
- * Sets the upstream USB4 link to be configured for power management
- * purposes.
- */
-int usb4_switch_configure_link(struct tb_switch *sw)
-{
-	struct tb_port *up;
-
-	up = tb_upstream_port(sw);
-	return usb4_set_port_configured(up, true);
-}
-
-/**
- * usb4_switch_unconfigure_link() - Un-set upstream USB4 link configuration
- * @sw: USB4 router
- *
- * Reverse of usb4_switch_configure_link().
- */
-void usb4_switch_unconfigure_link(struct tb_switch *sw)
-{
-	struct tb_port *up;
-
-	up = tb_upstream_port(sw);
-	usb4_set_port_configured(up, false);
-}
-
 /**
  * usb4_switch_lane_bonding_possible() - Are conditions met for lane bonding
  * @sw: USB4 router
@@ -789,6 +741,50 @@ int usb4_port_unlock(struct tb_port *port)
 	return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_4, 1);
 }
 
+static int usb4_port_set_configured(struct tb_port *port, bool configured)
+{
+	int ret;
+	u32 val;
+
+	if (!port->cap_usb4)
+		return -EINVAL;
+
+	ret = tb_port_read(port, &val, TB_CFG_PORT,
+			   port->cap_usb4 + PORT_CS_19, 1);
+	if (ret)
+		return ret;
+
+	if (configured)
+		val |= PORT_CS_19_PC;
+	else
+		val &= ~PORT_CS_19_PC;
+
+	return tb_port_write(port, &val, TB_CFG_PORT,
+			     port->cap_usb4 + PORT_CS_19, 1);
+}
+
+/**
+ * usb4_port_configure() - Set USB4 port configured
+ * @port: USB4 router
+ *
+ * Sets the USB4 link to be configured for power management purposes.
+ */
+int usb4_port_configure(struct tb_port *port)
+{
+	return usb4_port_set_configured(port, true);
+}
+
+/**
+ * usb4_port_unconfigure() - Set USB4 port unconfigured
+ * @port: USB4 router
+ *
+ * Sets the USB4 link to be unconfigured for power management purposes.
+ */
+void usb4_port_unconfigure(struct tb_port *port)
+{
+	usb4_port_set_configured(port, false);
+}
+
 static int usb4_port_wait_for_bit(struct tb_port *port, u32 offset, u32 bit,
 				  u32 value, int timeout_msec)
 {
-- 
2.28.0


  parent reply	other threads:[~2020-08-19 12:02 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-19 11:58 [PATCH 00/19] thunderbolt: Power Management improvements Mika Westerberg
2020-08-19 11:58 ` [PATCH 01/19] thunderbolt: Optimize Force Power logic Mika Westerberg
2020-08-19 11:58 ` [PATCH 02/19] thunderbolt: Optimize NHI LC mailbox command processing Mika Westerberg
2020-08-19 11:58 ` [PATCH 03/19] thunderbolt: Software CM only should set force power in Tiger Lake Mika Westerberg
2020-08-19 11:58 ` [PATCH 04/19] thunderbolt: Use bit 31 to check if Firmware CM is running " Mika Westerberg
2020-08-19 11:58 ` [PATCH 05/19] thunderbolt: Do not program NFC buffers for USB4 router protocol adapters Mika Westerberg
2020-08-19 11:58 ` [PATCH 06/19] thunderbolt: No need to log an error if tb_switch_lane_bonding_enable() fails Mika Westerberg
2020-08-19 11:58 ` [PATCH 07/19] thunderbolt: Send reset only to first generation routers Mika Westerberg
2020-08-19 11:58 ` [PATCH 08/19] thunderbolt: Tear down DP tunnels when suspending Mika Westerberg
2020-08-19 11:58 ` [PATCH 09/19] thunderbolt: Initialize TMU again on resume Mika Westerberg
2020-08-19 11:58 ` [PATCH 10/19] thunderbolt: Do not change default USB4 router notification timeout Mika Westerberg
2020-08-19 11:58 ` [PATCH 11/19] thunderbolt: Configure link after lane bonding is enabled Mika Westerberg
2020-08-19 11:58 ` Mika Westerberg [this message]
2020-08-19 11:58 ` [PATCH 13/19] thunderbolt: Configure port for XDomain Mika Westerberg
2020-08-19 11:59 ` [PATCH 14/19] thunderbolt: Disable lane 1 for XDomain connection Mika Westerberg
2020-08-19 11:59 ` [PATCH 15/19] thunderbolt: Enable wakes from system suspend Mika Westerberg
2020-08-19 11:59 ` [PATCH 16/19] PCI / thunderbolt: Switch to use device links instead of PCI quirk Mika Westerberg
2020-08-20 17:24   ` Bjorn Helgaas
2020-08-19 11:59 ` [PATCH 17/19] ACPI: Export acpi_get_first_physical_node() to modules Mika Westerberg
2020-08-19 11:59 ` [PATCH 18/19] thunderbolt: Create device links from ACPI description Mika Westerberg
2020-08-19 11:59 ` [PATCH 19/19] thunderbolt: Add runtime PM for Software CM Mika Westerberg
2020-09-03  9:15 ` [PATCH 00/19] thunderbolt: Power Management improvements Mika Westerberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200819115905.59834-13-mika.westerberg@linux.intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=YehezkelShB@gmail.com \
    --cc=andreas.noever@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=dana.alkattan@intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=michael.jamet@intel.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=rajmohan.mani@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).