linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
To: Jingoo Han <jingoohan1@gmail.com>,
	Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Rob Herring <robh@kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Ard Biesheuvel <ardb@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/2] PCI: dwc: Use an address in the driver data for MSI address
Date: Fri, 25 Sep 2020 16:38:52 +0800	[thread overview]
Message-ID: <20200925163852.051e3da2@xhacker.debian> (raw)
In-Reply-To: <20200925163435.680b8e08@xhacker.debian>

There's no need to allocate a page for the MSI address, we could use
an address in the driver data.

One side effect of this patch is fixing the MSI page leakage during
suspend/resume. Take the pcie-tegra194.c for example, it calls
dw_pcie_msi_init() in resume path, thus the previous MSI page is
leaked.

Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
 .../pci/controller/dwc/pcie-designware-host.c | 22 ++-----------------
 drivers/pci/controller/dwc/pcie-designware.h  |  1 -
 2 files changed, 2 insertions(+), 21 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index f08f4d97f321..bf25d783b5c5 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -126,9 +126,7 @@ static void dw_pci_setup_msi_msg(struct irq_data *d, struct msi_msg *msg)
 {
 	struct pcie_port *pp = irq_data_get_irq_chip_data(d);
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	u64 msi_target;
-
-	msi_target = (u64)pp->msi_data;
+	u64 msi_target = virt_to_phys(&pp->msi_data);
 
 	msg->address_lo = lower_32_bits(msi_target);
 	msg->address_hi = upper_32_bits(msi_target);
@@ -287,27 +285,11 @@ void dw_pcie_free_msi(struct pcie_port *pp)
 
 	irq_domain_remove(pp->msi_domain);
 	irq_domain_remove(pp->irq_domain);
-
-	if (pp->msi_page)
-		__free_page(pp->msi_page);
 }
 
 void dw_pcie_msi_init(struct pcie_port *pp)
 {
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct device *dev = pci->dev;
-	u64 msi_target;
-
-	pp->msi_page = alloc_page(GFP_KERNEL);
-	pp->msi_data = dma_map_page(dev, pp->msi_page, 0, PAGE_SIZE,
-				    DMA_FROM_DEVICE);
-	if (dma_mapping_error(dev, pp->msi_data)) {
-		dev_err(dev, "Failed to map MSI data\n");
-		__free_page(pp->msi_page);
-		pp->msi_page = NULL;
-		return;
-	}
-	msi_target = (u64)pp->msi_data;
+	u64 msi_target = virt_to_phys(&pp->msi_data);
 
 	/* Program the msi_data */
 	dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4,
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index f911760dcc69..a88e15a09745 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -195,7 +195,6 @@ struct pcie_port {
 	struct irq_domain	*irq_domain;
 	struct irq_domain	*msi_domain;
 	dma_addr_t		msi_data;
-	struct page		*msi_page;
 	struct irq_chip		*msi_irq_chip;
 	u32			num_vectors;
 	u32			irq_mask[MAX_MSI_CTRLS];
-- 
2.28.0


  parent reply	other threads:[~2020-09-25  8:39 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-25  8:34 [PATCH v3 0/2] PCI: dwc: fix two MSI issues Jisheng Zhang
2020-09-25  8:37 ` [PATCH v3 1/2] PCI: dwc: Skip PCIE_MSI_INTR0* programming if MSI is disabled Jisheng Zhang
2020-09-25 15:50   ` Rob Herring
2020-09-25  8:38 ` Jisheng Zhang [this message]
2020-09-25 15:33   ` [PATCH v3 2/2] PCI: dwc: Use an address in the driver data for MSI address Rob Herring
2020-09-27  9:23     ` Jisheng Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200925163852.051e3da2@xhacker.debian \
    --to=jisheng.zhang@synaptics.com \
    --cc=ardb@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).