From: Bjorn Helgaas <helgaas@kernel.org>
To: "Saheed O . Bolarinwa" <refactormyself@gmail.com>
Cc: Puranjay Mohan <puranjay12@gmail.com>,
Rajat Jain <rajatja@google.com>,
Kai-Heng Feng <kai.heng.feng@canonical.com>,
Yicong Yang <yangyicong@hisilicon.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH v3 06/12] PCI/ASPM: Remove struct aspm_register_info.latency_encoding
Date: Thu, 15 Oct 2020 14:30:33 -0500 [thread overview]
Message-ID: <20201015193039.12585-7-helgaas@kernel.org> (raw)
In-Reply-To: <20201015193039.12585-1-helgaas@kernel.org>
From: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
Previously we stored L0s and L1 Exit Latency information from the Link
Capabilities register in the struct aspm_register_info.
We only need these latencies when we already have the Link Capabilities
values, so use those directly and remove the latencies from struct
aspm_register_info. No functional change intended.
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/pcie/aspm.c | 24 ++++++++++--------------
1 file changed, 10 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 36540879586b..fd6e597b9d74 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -308,8 +308,10 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
}
/* Convert L0s latency encoding to ns */
-static u32 calc_l0s_latency(u32 encoding)
+static u32 calc_l0s_latency(u32 lnkcap)
{
+ u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L0SEL) >> 12;
+
if (encoding == 0x7)
return (5 * 1000); /* > 4us */
return (64 << encoding);
@@ -324,8 +326,10 @@ static u32 calc_l0s_acceptable(u32 encoding)
}
/* Convert L1 latency encoding to ns */
-static u32 calc_l1_latency(u32 encoding)
+static u32 calc_l1_latency(u32 lnkcap)
{
+ u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L1EL) >> 15;
+
if (encoding == 0x7)
return (65 * 1000); /* > 64us */
return (1000 << encoding);
@@ -381,8 +385,6 @@ static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value)
}
struct aspm_register_info {
- u32 latency_encoding_l0s;
- u32 latency_encoding_l1;
/* L1 substates */
u32 l1ss_cap_ptr;
u32 l1ss_cap;
@@ -393,12 +395,6 @@ struct aspm_register_info {
static void pcie_get_aspm_reg(struct pci_dev *pdev,
struct aspm_register_info *info)
{
- u32 reg32;
-
- pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, ®32);
- info->latency_encoding_l0s = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
- info->latency_encoding_l1 = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
-
/* Read L1 PM substate capabilities */
info->l1ss_cap = info->l1ss_ctl1 = info->l1ss_ctl2 = 0;
info->l1ss_cap_ptr = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS);
@@ -594,8 +590,8 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
link->aspm_enabled |= ASPM_STATE_L0S_UP;
if (parent_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S)
link->aspm_enabled |= ASPM_STATE_L0S_DW;
- link->latency_up.l0s = calc_l0s_latency(upreg.latency_encoding_l0s);
- link->latency_dw.l0s = calc_l0s_latency(dwreg.latency_encoding_l0s);
+ link->latency_up.l0s = calc_l0s_latency(parent_lnkcap);
+ link->latency_dw.l0s = calc_l0s_latency(child_lnkcap);
/* Setup L1 state */
if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L1)
@@ -603,8 +599,8 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
if (parent_lnkctl & child_lnkctl & PCI_EXP_LNKCTL_ASPM_L1)
link->aspm_enabled |= ASPM_STATE_L1;
- link->latency_up.l1 = calc_l1_latency(upreg.latency_encoding_l1);
- link->latency_dw.l1 = calc_l1_latency(dwreg.latency_encoding_l1);
+ link->latency_up.l1 = calc_l1_latency(parent_lnkcap);
+ link->latency_dw.l1 = calc_l1_latency(child_lnkcap);
/* Setup L1 substate
* If we don't have LTR for the entire path from the Root Complex
--
2.25.1
next prev parent reply other threads:[~2020-10-15 19:31 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-15 19:30 [PATCH v3 00/12] PCI/ASPM: Cleanup Bjorn Helgaas
2020-10-15 19:30 ` [PATCH v3 01/12] PCI/ASPM: Move pci_clear_and_set_dword() earlier Bjorn Helgaas
2020-10-15 19:30 ` [PATCH v3 02/12] PCI/ASPM: Move LTR path check to where it's used Bjorn Helgaas
2020-10-15 19:30 ` [PATCH v3 03/12] PCI/ASPM: Use 'parent' and 'child' for readability Bjorn Helgaas
2020-10-15 19:30 ` [PATCH v3 04/12] PCI/ASPM: Remove struct aspm_register_info.support Bjorn Helgaas
2020-10-15 19:30 ` [PATCH v3 05/12] PCI/ASPM: Remove struct aspm_register_info.enabled Bjorn Helgaas
2020-10-15 19:30 ` Bjorn Helgaas [this message]
2020-10-15 19:30 ` [PATCH v3 07/12] PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr Bjorn Helgaas
2020-10-15 19:30 ` [PATCH v3 08/12] PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) Bjorn Helgaas
2020-10-15 19:30 ` [PATCH v3 09/12] PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 Bjorn Helgaas
2020-10-15 19:30 ` [PATCH v3 10/12] PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info Bjorn Helgaas
2020-10-15 19:30 ` [PATCH v3 11/12] PCI/ASPM: Remove struct aspm_register_info.l1ss_cap Bjorn Helgaas
2020-10-15 19:30 ` [PATCH v3 12/12] PCI/ASPM: Remove struct pcie_link_state.l1ss Bjorn Helgaas
2020-10-16 20:59 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201015193039.12585-7-helgaas@kernel.org \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=hkallweit1@gmail.com \
--cc=kai.heng.feng@canonical.com \
--cc=linux-pci@vger.kernel.org \
--cc=puranjay12@gmail.com \
--cc=rajatja@google.com \
--cc=refactormyself@gmail.com \
--cc=yangyicong@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).