linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marek Szyprowski <m.szyprowski@samsung.com>
To: linux-samsung-soc@vger.kernel.org, linux-pci@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Jaehoon Chung <jh80.chung@samsung.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Rob Herring <robh+dt@kernel.org>
Subject: [PATCH 6/6] arm64: dts: exynos: add the WiFi/PCIe support to TM2(e) boards
Date: Mon, 19 Oct 2020 11:47:15 +0200	[thread overview]
Message-ID: <20201019094715.15343-7-m.szyprowski@samsung.com> (raw)
In-Reply-To: <20201019094715.15343-1-m.szyprowski@samsung.com>

From: Jaehoon Chung <jh80.chung@samsung.com>

Add the nodes relevant to PCIe PHY and PCIe support. PCIe is used for the
WiFi interface (Broadcom Limited BCM4358 802.11ac Wireless LAN SoC).

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
[mszyprow: rewrote commit message, reworked board/generic dts/dtsi split]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 .../boot/dts/exynos/exynos5433-pinctrl.dtsi   |  2 +-
 .../dts/exynos/exynos5433-tm2-common.dtsi     | 24 ++++++++++++-
 arch/arm64/boot/dts/exynos/exynos5433.dtsi    | 36 +++++++++++++++++++
 3 files changed, 60 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
index 9df7c65593a1..32a6518517e5 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -329,7 +329,7 @@
 	};
 
 	pcie_bus: pcie_bus {
-		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 	};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 829fea23d4ab..ef45ef86c48d 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -969,6 +969,25 @@
 	bus-width = <4>;
 };
 
+&pcie {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_bus &pcie_wlanen>;
+	vdd10-supply = <&ldo6_reg>;
+	vdd18-supply = <&ldo7_reg>;
+	assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>,
+			<&cmu_top CLK_MOUT_SCLK_PCIE_100>;
+	assigned-clock-parents = <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
+			<&cmu_top CLK_MOUT_BUS_PLL_USER>;
+	assigned-clock-rates = <0>, <100000000>;
+	interrupt-map-mask = <0 0 0 0>;
+	interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
 &ppmu_d0_general {
 	status = "okay";
 	events {
@@ -1085,8 +1104,11 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&initial_ese>;
 
+	pcie_wlanen: pcie-wlanen {
+		PIN(INPUT, gpj2-0, UP, FAST_SR4);
+	};
+
 	initial_ese: initial-state {
-		PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
 		PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
 		PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
 	};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 8eb4576da8f3..be2d1753d1d1 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1029,6 +1029,11 @@
 			reg = <0x145f0000 0x1038>;
 		};
 
+		syscon_fsys: syscon@156f0000 {
+			compatible = "syscon";
+			reg = <0x156f0000 0x1044>;
+		};
+
 		gsc_0: video-scaler@13c00000 {
 			compatible = "samsung,exynos5433-gsc";
 			reg = <0x13c00000 0x1000>;
@@ -1830,6 +1835,37 @@
 				status = "disabled";
 			};
 		};
+
+		pcie_phy: pcie-phy@15680000 {
+			compatible = "samsung,exynos5433-pcie-phy";
+			reg = <0x15680000 0x1000>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			samsung,fsys-sysreg = <&syscon_fsys>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie: pcie@15700000 {
+			compatible = "samsung,exynos5433-pcie";
+			reg = <0x156b0000 0x1000>, <0x15700000 0x1000>,
+			      <0x0c000000 0x1000>;
+			reg-names = "elbi", "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PCIE>,
+			         <&cmu_fsys CLK_PCLK_PCIE_PHY>;
+			clock-names = "pcie", "pcie_bus";
+			num-lanes = <1>;
+			bus-range = <0x00 0xff>;
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			ranges = <0x81000000 0 0	  0x0c001000 0 0x00010000>,
+				 <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
+			status = "disabled";
+		};
 	};
 
 	timer: timer {
-- 
2.17.1


  parent reply	other threads:[~2020-10-19  9:48 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20201019094737eucas1p283ea94186450c0756442624d95de627f@eucas1p2.samsung.com>
2020-10-19  9:47 ` [PATCH 0/6] Add DW PCIe support for Exynos5433 SoCs Marek Szyprowski
     [not found]   ` <CGME20201019094738eucas1p29b377b561089cfc3eba1755d475125b9@eucas1p2.samsung.com>
2020-10-19  9:47     ` [PATCH 1/6] Documetation: dt-bindings: drop samsung,exynos5440-pcie binding Marek Szyprowski
2020-10-19 10:08       ` Krzysztof Kozlowski
2020-10-19 20:07       ` Rob Herring
     [not found]   ` <CGME20201019094739eucas1p18cd4c7e5a0197393d2e7c5c6fcc2777d@eucas1p1.samsung.com>
2020-10-19  9:47     ` [PATCH 2/6] Documetation: dt-bindings: add the samsung,exynos-pcie binding Marek Szyprowski
2020-10-19 10:12       ` Krzysztof Kozlowski
2020-10-19 10:18         ` Krzysztof Kozlowski
2020-10-21 11:59           ` Marek Szyprowski
2020-10-21 12:12             ` Krzysztof Kozlowski
2020-10-19 10:28       ` Krzysztof Kozlowski
2020-10-19 13:38       ` Rob Herring
2020-10-21 12:05         ` Marek Szyprowski
     [not found]   ` <CGME20201019094739eucas1p17424b1224bf2a1a5b16c33deb4209166@eucas1p1.samsung.com>
2020-10-19  9:47     ` [PATCH 3/6] Documetation: dt-bindings: add the samsung,exynos-pcie-phy binding Marek Szyprowski
2020-10-19 10:14       ` Krzysztof Kozlowski
2020-10-19 20:09       ` Rob Herring
     [not found]   ` <CGME20201019094740eucas1p10ea264deb2cd185858d0dfdd9f6ed6fe@eucas1p1.samsung.com>
2020-10-19  9:47     ` [PATCH 4/6] phy: samsung: phy-exynos-pcie: rework driver to support Exynos5433 PCIe PHY Marek Szyprowski
2020-10-19 10:16       ` Krzysztof Kozlowski
     [not found]   ` <CGME20201019094740eucas1p2cd873b29bc19708f9a712d955cba62fe@eucas1p2.samsung.com>
2020-10-19  9:47     ` [PATCH 5/6] pci: dwc: pci-exynos: rework the driver to support Exynos5433 variant Marek Szyprowski
2020-10-19 10:21       ` Krzysztof Kozlowski
     [not found]   ` <CGME20201019094741eucas1p1b4934cd5024a18804fcee921294acee0@eucas1p1.samsung.com>
2020-10-19  9:47     ` Marek Szyprowski [this message]
2020-10-19 10:31       ` [PATCH 6/6] arm64: dts: exynos: add the WiFi/PCIe support to TM2(e) boards Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201019094715.15343-7-m.szyprowski@samsung.com \
    --to=m.szyprowski@samsung.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jh80.chung@samsung.com \
    --cc=jingoohan1@gmail.com \
    --cc=kishon@ti.com \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).