Linux-PCI Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/2] Add support to configure DWC for ECRC
@ 2020-10-25  7:31 Vidya Sagar
  2020-10-25  7:31 ` [PATCH 1/2] PCI/AER: Add pcie_is_ecrc_enabled() API Vidya Sagar
  2020-10-25  7:31 ` [PATCH 2/2] PCI: dwc: Add support to configure for ECRC Vidya Sagar
  0 siblings, 2 replies; 6+ messages in thread
From: Vidya Sagar @ 2020-10-25  7:31 UTC (permalink / raw)
  To: jingoohan1, gustavo.pimentel, lorenzo.pieralisi, bhelgaas,
	amurray, robh, treding, jonathanh
  Cc: linux-pci, linux-kernel, kthota, mmaddireddy, vidyas, sagar.tv

This series has two patches.

Patch-1: Adds a public API to query if the system has ECRC policty turned on.

Patch-2: DesignWare core PCIe IP has a TLP Digest (TD) override bit in one of
its control registers of ATU. This bit needs to be programmed for proper ECRC
functionality. This is currently identified as an issue with DesignWare
IP version 4.90a. DWC code queries the PCIe sub-system through the API added
in Patch-1 to find out if ECRC is turned on or not and configures ATU
accordingly.

Vidya Sagar (2):
  PCI/AER: Add pcie_is_ecrc_enabled() API
  PCI: dwc: Add support to configure for ECRC

 drivers/pci/controller/dwc/pcie-designware.c |  8 ++++++--
 drivers/pci/controller/dwc/pcie-designware.h |  2 ++
 drivers/pci/pci.h                            |  2 ++
 drivers/pci/pcie/aer.c                       | 11 +++++++++++
 4 files changed, 21 insertions(+), 2 deletions(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, back to index

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-25  7:31 [PATCH 0/2] Add support to configure DWC for ECRC Vidya Sagar
2020-10-25  7:31 ` [PATCH 1/2] PCI/AER: Add pcie_is_ecrc_enabled() API Vidya Sagar
2020-10-25  7:31 ` [PATCH 2/2] PCI: dwc: Add support to configure for ECRC Vidya Sagar
2020-10-25 20:49   ` Jingoo Han
2020-10-26  6:59     ` Vidya Sagar
2020-10-26 13:30       ` Jingoo Han

Linux-PCI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pci/0 linux-pci/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pci linux-pci/ https://lore.kernel.org/linux-pci \
		linux-pci@vger.kernel.org
	public-inbox-index linux-pci

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pci


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git