From: Marek Behun <marek.behun@nic.cz>
To: "Toke Høiland-Jørgensen" <toke@redhat.com>
Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Rob Herring <robh@kernel.org>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>
Subject: Re: PCI trouble on mvebu (Turris Omnia)
Date: Tue, 27 Oct 2020 19:03:44 +0100 [thread overview]
Message-ID: <20201027190344.4ffd9186@nic.cz> (raw)
In-Reply-To: <87imavwu7b.fsf@toke.dk>
Are you using stock U-Boot in the Omnia?
Marek
On Tue, 27 Oct 2020 16:43:20 +0100
Toke Høiland-Jørgensen <toke@redhat.com> wrote:
> Hi everyone
>
> I'm trying to get a mainline kernel to run on my Turris Omnia, and am
> having some trouble getting the PCI bus to work correctly. Specifically,
> I'm running a 5.10-rc1 kernel (torvalds/master as of this moment), with
> the resource request fix[0] applied on top.
>
> The kernel boots fine, and the patch in [0] makes the PCI devices show
> up. But I'm still getting initialisation errors like these:
>
> [ 1.632709] pci 0000:01:00.0: BAR 0: error updating (0xe0000004 != 0xffffffff)
> [ 1.632714] pci 0000:01:00.0: BAR 0: error updating (high 0x000000 != 0xffffffff)
> [ 1.632745] pci 0000:02:00.0: BAR 0: error updating (0xe0200004 != 0xffffffff)
> [ 1.632750] pci 0000:02:00.0: BAR 0: error updating (high 0x000000 != 0xffffffff)
>
> and the WiFi drivers fail to initialise with what appears to me to be
> errors related to the bus rather than to the drivers themselves:
>
> [ 3.509878] ath: phy0: Mac Chip Rev 0xfffc0.f is not supported by this driver
> [ 3.517049] ath: phy0: Unable to initialize hardware; initialization status: -95
> [ 3.524473] ath9k 0000:01:00.0: Failed to initialize device
> [ 3.530081] ath9k: probe of 0000:01:00.0 failed with error -95
> [ 3.536012] ath10k_pci 0000:02:00.0: of_irq_parse_pci: failed with rc=134
> [ 3.543049] pci 0000:00:02.0: enabling device (0140 -> 0142)
> [ 3.548735] ath10k_pci 0000:02:00.0: can't change power state from D3hot to D0 (config space inaccessible)
> [ 3.588592] ath10k_pci 0000:02:00.0: failed to wake up device : -110
> [ 3.595098] ath10k_pci: probe of 0000:02:00.0 failed with error -110
>
> lspci looks OK, though:
>
> # lspci
> 00:01.0 PCI bridge: Marvell Technology Group Ltd. Device 6820 (rev 04)
> 00:02.0 PCI bridge: Marvell Technology Group Ltd. Device 6820 (rev 04)
> 00:03.0 PCI bridge: Marvell Technology Group Ltd. Device 6820 (rev 04)
> 01:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
> 02:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter (rev ff)
>
> Does anyone have any clue what could be going on here? Is this a bug, or
> did I miss something in my config or other initialisation? I've tried
> with both the stock u-boot distributed with the board, and with an
> upstream u-boot from latest master; doesn't seem to make any different.
>
> Any pointers will be greatly appreciated!
>
> Thanks,
>
> -Toke
>
>
> [0] https://lore.kernel.org/linux-pci/20201023145252.2691779-1-robh@kernel.org/
next prev parent reply other threads:[~2020-10-27 18:09 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-27 15:43 PCI trouble on mvebu (Turris Omnia) Toke Høiland-Jørgensen
2020-10-27 17:20 ` Bjorn Helgaas
2020-10-27 17:44 ` ™֟☻̭҇ Ѽ ҉ ®
2020-10-27 18:59 ` Toke Høiland-Jørgensen
2020-10-27 20:20 ` Toke Høiland-Jørgensen
2020-10-27 21:22 ` ™֟☻̭҇ Ѽ ҉ ®
2020-10-27 21:31 ` Toke Høiland-Jørgensen
2020-10-27 22:01 ` ™֟☻̭҇ Ѽ ҉ ®
2020-10-27 22:12 ` Toke Høiland-Jørgensen
2020-10-27 18:56 ` Toke Høiland-Jørgensen
2020-10-28 13:36 ` Toke Høiland-Jørgensen
2020-10-28 14:42 ` Bjorn Helgaas
2020-10-28 15:08 ` Toke Høiland-Jørgensen
2020-10-28 16:40 ` ™֟☻̭҇ Ѽ ҉ ®
2020-10-28 23:16 ` Bjorn Helgaas
2020-10-29 10:09 ` Pali Rohár
2020-10-29 10:56 ` ™֟☻̭҇ Ѽ ҉ ®
2020-10-29 11:12 ` Toke Høiland-Jørgensen
2020-10-29 19:30 ` Bjorn Helgaas
2020-10-29 19:56 ` ™֟☻̭҇ Ѽ ҉ ®
2020-10-29 19:57 ` Andrew Lunn
2020-10-29 21:55 ` Thomas Petazzoni
2020-10-29 20:18 ` Toke Høiland-Jørgensen
2020-10-29 22:09 ` Toke Høiland-Jørgensen
2020-10-29 20:58 ` Marek Behun
2020-10-30 10:08 ` Pali Rohár
2020-10-30 10:45 ` Marek Behun
2020-10-29 21:54 ` Thomas Petazzoni
2020-10-29 23:15 ` Toke Høiland-Jørgensen
2020-10-30 8:23 ` Thomas Petazzoni
2020-10-30 10:15 ` Pali Rohár
2020-10-29 10:41 ` Toke Høiland-Jørgensen
2020-10-29 11:18 ` ™֟☻̭҇ Ѽ ҉ ®
2020-10-30 11:23 ` Pali Rohár
2020-10-30 13:02 ` Toke Høiland-Jørgensen
2020-10-30 14:23 ` Pali Rohár
2020-10-30 14:54 ` ™֟☻̭҇ Ѽ ҉ ®
2020-10-31 12:49 ` Toke Høiland-Jørgensen
2020-11-02 15:24 ` Pali Rohár
2020-11-02 15:54 ` Toke Høiland-Jørgensen
2020-11-02 16:18 ` ™֟☻̭҇ Ѽ ҉ ®
2020-11-02 16:33 ` Toke Høiland-Jørgensen
2021-03-15 19:58 ` Pali Rohár
2021-03-16 9:25 ` Pali Rohár
2021-03-18 22:43 ` Toke Høiland-Jørgensen
2021-03-18 23:16 ` Pali Rohár
2021-03-26 12:50 ` Pali Rohár
2021-03-26 15:25 ` Toke Høiland-Jørgensen
2021-03-26 15:34 ` Pali Rohár
2021-03-26 16:54 ` Toke Høiland-Jørgensen
2021-03-26 17:11 ` Pali Rohár
2021-03-26 17:51 ` Toke Høiland-Jørgensen
2021-03-29 17:09 ` Pali Rohár
2021-03-31 14:02 ` Toke Høiland-Jørgensen
2021-03-31 16:15 ` Pali Rohár
2021-03-31 16:53 ` Toke Høiland-Jørgensen
2020-10-29 1:21 ` Marek Behun
2020-10-29 15:12 ` Rob Herring
2020-10-27 18:03 ` Marek Behun [this message]
2020-10-27 19:00 ` Toke Høiland-Jørgensen
2020-10-27 20:19 ` Marek Behun
2020-10-27 20:49 ` Toke Høiland-Jørgensen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201027190344.4ffd9186@nic.cz \
--to=marek.behun@nic.cz \
--cc=ilias.apalodimas@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=robh@kernel.org \
--cc=toke@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).