linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jon Derrick <jonathan.derrick@intel.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: <linux-pci@vger.kernel.org>, Bjorn Helgaas <helgaas@kernel.org>,
	Nirmal Patel <nirmal.patel@intel.com>,
	Sushma Kalakota <sushmax.kalakota@intel.com>,
	Jon Derrick <jonathan.derrick@intel.com>
Subject: [PATCH 1/5] PCI: vmd: Reset the VMD subdevice domain on probe
Date: Fri, 20 Nov 2020 15:51:40 -0700	[thread overview]
Message-ID: <20201120225144.15138-2-jonathan.derrick@intel.com> (raw)
In-Reply-To: <20201120225144.15138-1-jonathan.derrick@intel.com>

The VMD subdevice domain resource requirements may have changed
in-between module loads. Generic PCI resource assignment code may rely
on existing resource configuration rather than the VMD preference of
re-examining the domain. Add a Secondary Bus Reset to the VMD subdevice
domain during driver attachment to clear the PCI config space of the
subdevices.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
---
 drivers/pci/controller/vmd.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index c31e4d5..c7b5614 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -14,6 +14,7 @@
 #include <linux/srcu.h>
 #include <linux/rculist.h>
 #include <linux/rcupdate.h>
+#include <linux/delay.h>
 
 #include <asm/irqdomain.h>
 #include <asm/device.h>
@@ -424,6 +425,36 @@ static int vmd_pci_write(struct pci_bus *bus, unsigned int devfn, int reg,
 	.write		= vmd_pci_write,
 };
 
+static void vmd_domain_reset_sbr(struct vmd_dev *vmd)
+{
+	char __iomem *base;
+	int rp;
+	u16 ctl;
+
+	/*
+	 * Subdevice config space is mapped linearly using 4k config space
+	 * increments. Use increments of 0x8000 to locate root port devices.
+	 */
+	for (rp = 0; rp < 4; rp++) {
+		base = vmd->cfgbar + rp * 0x8000;
+		if (readl(base + PCI_COMMAND) == 0xFFFFFFFF)
+			continue;
+
+		/* pci_reset_secondary_bus() */
+		ctl = readw(base + PCI_BRIDGE_CONTROL);
+		ctl |= PCI_BRIDGE_CTL_BUS_RESET;
+		writew(ctl, base + PCI_BRIDGE_CONTROL);
+		readw(base + PCI_BRIDGE_CONTROL);
+		msleep(2);
+
+		ctl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+		writew(ctl, base + PCI_BRIDGE_CONTROL);
+		readw(base + PCI_BRIDGE_CONTROL);
+	}
+
+	ssleep(1);
+}
+
 static void vmd_attach_resources(struct vmd_dev *vmd)
 {
 	vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1];
@@ -707,6 +738,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
 	if (vmd->irq_domain)
 		dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
 
+	vmd_domain_reset_sbr(vmd);
 	pci_scan_child_bus(vmd->bus);
 	pci_assign_unassigned_bus_resources(vmd->bus);
 
-- 
1.8.3.1


  reply	other threads:[~2020-11-20 22:52 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-20 22:51 [PATCH 0/5] Legacy direct-assign mode Jon Derrick
2020-11-20 22:51 ` Jon Derrick [this message]
2020-11-20 22:51 ` [PATCH 2/5] PCI: Add a reset quirk for VMD Jon Derrick
2020-11-24 21:40   ` Bjorn Helgaas
2020-11-25 17:22     ` Derrick, Jonathan
2020-11-25 17:34       ` Alex Williamson
2020-11-20 22:51 ` [PATCH 3/5] PCI: vmd: Add offset translation helper Jon Derrick
2020-11-20 22:51 ` [PATCH 4/5] PCI: vmd: Pass features to vmd_get_phys_offsets() Jon Derrick
2020-11-20 22:51 ` [PATCH 5/5] PCI: vmd: Add legacy guest passthrough mode Jon Derrick
2021-03-22 12:28 ` [PATCH 0/5] Legacy direct-assign mode Lorenzo Pieralisi
2021-03-22 15:25   ` Derrick, Jonathan
2021-03-22 19:48   ` Christoph Hellwig
2021-03-22 22:55     ` Derrick, Jonathan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201120225144.15138-2-jonathan.derrick@intel.com \
    --to=jonathan.derrick@intel.com \
    --cc=helgaas@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=nirmal.patel@intel.com \
    --cc=sushmax.kalakota@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).