linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Sean V Kelley <sean.v.kelley@intel.com>
Cc: bhelgaas@google.com, Jonathan.Cameron@huawei.com,
	xerces.zhao@gmail.com, rafael.j.wysocki@intel.com,
	ashok.raj@intel.com, tony.luck@intel.com,
	sathyanarayanan.kuppuswamy@intel.com, qiuxu.zhuo@intel.com,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Kuppuswamy Sathyanarayanan 
	<sathyanarayanan.kuppuswamy@linux.intel.com>
Subject: Re: [PATCH v12 07/15] PCI/ERR: Use "bridge" for clarity in pcie_do_recovery()
Date: Wed, 2 Dec 2020 17:18:59 -0600	[thread overview]
Message-ID: <20201202231859.GA1484005@bjorn-Precision-5520> (raw)
In-Reply-To: <20201121001036.8560-8-sean.v.kelley@intel.com>

On Fri, Nov 20, 2020 at 04:10:28PM -0800, Sean V Kelley wrote:
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index 7a5af873d8bc..46a5b84f8842 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -151,24 +151,27 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
>  		pci_ers_result_t (*reset_subordinates)(struct pci_dev *pdev))
>  {
>  	int type = pci_pcie_type(dev);
> -	pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
> +	struct pci_dev *bridge;
>  	struct pci_bus *bus;
> +	pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
>  
>  	/*
> -	 * Error recovery runs on all subordinates of the first downstream port.
> -	 * If the downstream port detected the error, it is cleared at the end.
> +	 * Error recovery runs on all subordinates of the bridge.  If the
> +	 * bridge detected the error, it is cleared at the end.
>  	 */
>  	if (!(type == PCI_EXP_TYPE_ROOT_PORT ||
>  	      type == PCI_EXP_TYPE_DOWNSTREAM))
> -		dev = pci_upstream_bridge(dev);
> -	bus = dev->subordinate;
> +		bridge = pci_upstream_bridge(dev);
> +	else
> +		bridge = dev;

I think there's a bug here even before your series.  We started with:

  pcie_do_recovery(struct pci_dev *dev, ..., pci_ers_result_t (*reset_link)())
  {
    if (!(pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
	  pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM))
      dev = dev->bus->self;
    ...
    reset_link(dev);

so if we called pcie_do_recovery() with an Endpoint, we set "dev" to
the upstream bridge, either a Root Port or a Switch Downstream Port,
which we then pass on to reset_link().  For native AER and APEI,
that's aer_root_reset(), which assumes it gets a Root Port.

If we pass a Switch Downstream Port, aer_root_reset() writes to the
*switch port's* PCI_ERR_ROOT_COMMAND and PCI_ERR_ROOT_STATUS, which
are reserved since it's not a Root Port or an RCEC.

The writes probably don't *break* anything since those registers are
reserved, but they also don't disable the interrupt or clear the Root
Error Status.

Bjorn

  reply	other threads:[~2020-12-02 23:19 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-21  0:10 [PATCH v12 00/15] Add RCEC handling to PCI/AER Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 01/15] AER: aer_root_reset() non-native handling Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 02/15] PCI/RCEC: Bind RCEC devices to the Root Port driver Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 03/15] PCI/RCEC: Cache RCEC capabilities in pci_init_capabilities() Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 04/15] PCI/ERR: Rename reset_link() to reset_subordinates() Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 05/15] PCI/ERR: Simplify by using pci_upstream_bridge() Sean V Kelley
2020-12-03 18:45   ` Kelley, Sean V
2020-12-03 22:25     ` Bjorn Helgaas
2020-11-21  0:10 ` [PATCH v12 06/15] PCI/ERR: Simplify by computing pci_pcie_type() once Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 07/15] PCI/ERR: Use "bridge" for clarity in pcie_do_recovery() Sean V Kelley
2020-12-02 23:18   ` Bjorn Helgaas [this message]
2020-11-21  0:10 ` [PATCH v12 08/15] PCI/ERR: Avoid negated conditional for clarity Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 09/15] PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery() Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 10/15] PCI/ERR: Limit AER resets in pcie_do_recovery() Sean V Kelley
2020-11-23 23:28   ` Bjorn Helgaas
2020-11-23 23:57     ` Kelley, Sean V
2020-11-24 17:17       ` Bjorn Helgaas
2020-11-30 19:54         ` Kelley, Sean V
2020-12-01  0:25           ` Bjorn Helgaas
2020-12-01  1:09             ` Kuppuswamy, Sathyanarayanan
2020-12-01  1:13             ` Kelley, Sean V
2020-12-02 20:53             ` Kelley, Sean V
2020-12-02 21:27               ` Bjorn Helgaas
2020-12-02 22:54                 ` Kelley, Sean V
2020-11-21  0:10 ` [PATCH v12 11/15] PCI/RCEC: Add pcie_link_rcec() to associate RCiEPs Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 12/15] PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR Sean V Kelley
2020-12-02 23:44   ` Bjorn Helgaas
2020-12-03  0:51     ` Kelley, Sean V
2020-12-04  0:01       ` Bjorn Helgaas
2020-12-04 17:17         ` Kelley, Sean V
2020-12-04 17:24           ` Bjorn Helgaas
2020-12-05 21:30           ` Bjorn Helgaas
2020-12-07 17:23             ` Kelley, Sean V
2020-11-21  0:10 ` [PATCH v12 13/15] PCI/AER: Add pcie_walk_rcec() to RCEC AER handling Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 14/15] PCI/PME: Add pcie_walk_rcec() to RCEC PME handling Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 15/15] PCI/AER: Add RCEC AER error injection support Sean V Kelley
2020-11-21  4:26 ` [PATCH v12 00/15] Add RCEC handling to PCI/AER Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201202231859.GA1484005@bjorn-Precision-5520 \
    --to=helgaas@kernel.org \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=ashok.raj@intel.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=qiuxu.zhuo@intel.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=sathyanarayanan.kuppuswamy@intel.com \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    --cc=sean.v.kelley@intel.com \
    --cc=tony.luck@intel.com \
    --cc=xerces.zhao@gmail.com \
    --subject='Re: [PATCH v12 07/15] PCI/ERR: Use "bridge" for clarity in pcie_do_recovery()' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).