[PATCH mlx5-next v1 1/5] PCI: Add sysfs callback to allow MSI-X table size change of SR-IOV VFs

[Leon Romanovsky <leon@kernel.org>]

From: Leon Romanovsky <leonro@nvidia.com>

Extend PCI sysfs interface with a new callback that allows configure
the number of MSI-X vectors for specific SR-IO VF. This is needed
to optimize the performance of newly bound devices by allocating
the number of vectors based on the administrator knowledge of targeted VM.

This function is applicable for SR-IOV VF because such devices allocate
their MSI-X table before they will run on the VMs and HW can't guess the
right number of vectors, so the HW allocates them statically and equally.

The newly added /sys/bus/pci/devices/.../vf_msix_vec file will be seen
for the VFs and it is writable as long as a driver is not bounded to the VF.

The values accepted are:
 * > 0 - this will be number reported by the VF's MSI-X capability
 * < 0 - not valid
 * = 0 - will reset to the device default value

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
---
 Documentation/ABI/testing/sysfs-bus-pci | 20 ++++++++
 drivers/pci/iov.c                       | 62 +++++++++++++++++++++++++
 drivers/pci/msi.c                       | 29 ++++++++++++
 drivers/pci/pci-sysfs.c                 |  1 +
 drivers/pci/pci.h                       |  2 +
 include/linux/pci.h                     |  8 +++-
 6 files changed, 121 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 25c9c39770c6..05e26e5da54e 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -375,3 +375,23 @@ Description:
 		The value comes from the PCI kernel device state and can be one
 		of: "unknown", "error", "D0", D1", "D2", "D3hot", "D3cold".
 		The file is read only.
+
+What:		/sys/bus/pci/devices/.../vf_msix_vec
+Date:		December 2020
+Contact:	Leon Romanovsky <leonro@nvidia.com>
+Description:
+		This file is associated with the SR-IOV VFs.
+		It allows configuration of the number of MSI-X vectors for
+		the VF. This is needed to optimize performance of newly bound
+		devices by allocating the number of vectors based on the
+		administrator knowledge of targeted VM.
+
+		The values accepted are:
+		 * > 0 - this will be number reported by the VF's MSI-X
+			 capability
+		 * < 0 - not valid
+		 * = 0 - will reset to the device default value
+
+		The file is writable if the PF is bound to a driver that
+		supports the ->sriov_set_msix_vec_count() callback and there
+		is no driver bound to the VF.
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 4afd4ee4f7f0..42c0df4158d1 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -31,6 +31,7 @@ int pci_iov_virtfn_devfn(struct pci_dev *dev, int vf_id)
 	return (dev->devfn + dev->sriov->offset +
 		dev->sriov->stride * vf_id) & 0xff;
 }
+EXPORT_SYMBOL(pci_iov_virtfn_devfn);

 /*
  * Per SR-IOV spec sec 3.3.10 and 3.3.11, First VF Offset and VF Stride may
@@ -426,6 +427,67 @@ const struct attribute_group sriov_dev_attr_group = {
 	.is_visible = sriov_attrs_are_visible,
 };

+#ifdef CONFIG_PCI_MSI
+static ssize_t vf_msix_vec_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	int numb = pci_msix_vec_count(pdev);
+	struct pci_dev *pfdev;
+
+	if (numb < 0)
+		return numb;
+
+	pfdev = pci_physfn(pdev);
+	if (!pfdev->driver || !pfdev->driver->sriov_set_msix_vec_count)
+		return -EOPNOTSUPP;
+
+	return sprintf(buf, "%d\n", numb);
+}
+
+static ssize_t vf_msix_vec_store(struct device *dev,
+				 struct device_attribute *attr, const char *buf,
+				 size_t count)
+{
+	struct pci_dev *vf_dev = to_pci_dev(dev);
+	int val, ret;
+
+	ret = kstrtoint(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	ret = pci_set_msix_vec_count(vf_dev, val);
+	if (ret)
+		return ret;
+
+	return count;
+}
+static DEVICE_ATTR_RW(vf_msix_vec);
+#endif
+
+static struct attribute *sriov_vf_dev_attrs[] = {
+#ifdef CONFIG_PCI_MSI
+	&dev_attr_vf_msix_vec.attr,
+#endif
+	NULL,
+};
+
+static umode_t sriov_vf_attrs_are_visible(struct kobject *kobj,
+					  struct attribute *a, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+
+	if (dev_is_pf(dev))
+		return 0;
+
+	return a->mode;
+}
+
+const struct attribute_group sriov_vf_dev_attr_group = {
+	.attrs = sriov_vf_dev_attrs,
+	.is_visible = sriov_vf_attrs_are_visible,
+};
+
 int __weak pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
 {
 	return 0;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 3162f88fe940..20705ca94666 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -991,6 +991,35 @@ int pci_msix_vec_count(struct pci_dev *dev)
 }
 EXPORT_SYMBOL(pci_msix_vec_count);

+/**
+ * pci_set_msix_vec_count - change the reported number of MSI-X vectors
+ * This function is applicable for SR-IOV VF because such devices allocate
+ * their MSI-X table before they will run on the VMs and HW can't guess the
+ * right number of vectors, so the HW allocates them statically and equally.
+ * @dev: VF device that is going to be changed
+ * @numb: amount of MSI-X vectors
+ **/
+int pci_set_msix_vec_count(struct pci_dev *dev, int numb)
+{
+	struct pci_dev *pdev = pci_physfn(dev);
+
+	if (!dev->msix_cap || !pdev->msix_cap)
+		return -EINVAL;
+
+	if (dev->driver || !pdev->driver ||
+	    !pdev->driver->sriov_set_msix_vec_count)
+		return -EOPNOTSUPP;
+
+	if (numb < 0)
+		/*
+		 * We don't support negative numbers for now,
+		 * but maybe in the future it will make sense.
+		 */
+		return -EINVAL;
+
+	return pdev->driver->sriov_set_msix_vec_count(dev, numb);
+}
+
 static int __pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
 			     int nvec, struct irq_affinity *affd, int flags)
 {
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index fb072f4b3176..0af2222643c2 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -1557,6 +1557,7 @@ static const struct attribute_group *pci_dev_attr_groups[] = {
 	&pci_dev_hp_attr_group,
 #ifdef CONFIG_PCI_IOV
 	&sriov_dev_attr_group,
+	&sriov_vf_dev_attr_group,
 #endif
 	&pci_bridge_attr_group,
 	&pcie_dev_attr_group,
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 5c59365092fa..1fd273077637 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -183,6 +183,7 @@ extern unsigned int pci_pm_d3hot_delay;

 #ifdef CONFIG_PCI_MSI
 void pci_no_msi(void);
+int pci_set_msix_vec_count(struct pci_dev *dev, int numb);
 #else
 static inline void pci_no_msi(void) { }
 #endif
@@ -502,6 +503,7 @@ resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
 void pci_restore_iov_state(struct pci_dev *dev);
 int pci_iov_bus_range(struct pci_bus *bus);
 extern const struct attribute_group sriov_dev_attr_group;
+extern const struct attribute_group sriov_vf_dev_attr_group;
 #else
 static inline int pci_iov_init(struct pci_dev *dev)
 {
diff --git a/include/linux/pci.h b/include/linux/pci.h
index b32126d26997..a17cfc28eb66 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -856,6 +856,8 @@ struct module;
  *		e.g. drivers/net/e100.c.
  * @sriov_configure: Optional driver callback to allow configuration of
  *		number of VFs to enable via sysfs "sriov_numvfs" file.
+ * @sriov_set_msix_vec_count: Driver callback to change number of MSI-X vectors
+ *              exposed by the sysfs "vf_msix_vec" entry.
  * @err_handler: See Documentation/PCI/pci-error-recovery.rst
  * @groups:	Sysfs attribute groups.
  * @driver:	Driver model structure.
@@ -871,6 +873,7 @@ struct pci_driver {
 	int  (*resume)(struct pci_dev *dev);	/* Device woken up */
 	void (*shutdown)(struct pci_dev *dev);
 	int  (*sriov_configure)(struct pci_dev *dev, int num_vfs); /* On PF */
+	int  (*sriov_set_msix_vec_count)(struct pci_dev *vf, int msix_vec_count); /* On PF */
 	const struct pci_error_handlers *err_handler;
 	const struct attribute_group **groups;
 	struct device_driver	driver;
@@ -2057,7 +2060,6 @@ void __iomem *pci_ioremap_wc_bar(struct pci_dev *pdev, int bar);

 #ifdef CONFIG_PCI_IOV
 int pci_iov_virtfn_bus(struct pci_dev *dev, int id);
-int pci_iov_virtfn_devfn(struct pci_dev *dev, int id);

 int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn);
 void pci_disable_sriov(struct pci_dev *dev);
@@ -2402,6 +2404,10 @@ static inline bool pci_is_thunderbolt_attached(struct pci_dev *pdev)
 void pci_uevent_ers(struct pci_dev *pdev, enum  pci_ers_result err_type);
 #endif

+#ifdef CONFIG_PCI_IOV
+int pci_iov_virtfn_devfn(struct pci_dev *dev, int vf_id);
+#endif
+
 /* Provide the legacy pci_dma_* API */
 #include <linux/pci-dma-compat.h>

--
2.29.2