From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>,
devicetree@vger.kernel.org, "Balaji T K" <balajitk@ti.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Kishon Vijay Abraham I" <kishon@ti.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Vignesh Raghavendra" <vigneshr@ti.com>,
linux-pci@vger.kernel.org
Subject: [PATCH 04/27] ARM: dts: Properly configure dra7 edma sysconfig registers
Date: Tue, 26 Jan 2021 10:26:53 +0200 [thread overview]
Message-ID: <20210126082716.54358-5-tony@atomide.com> (raw)
In-Reply-To: <20210126082716.54358-1-tony@atomide.com>
Looks like the TRM is not listing the sysconfig for edma, let's add it
based on am437x TRM edma registers as listed in sections "Table 10-26.
EDMA3CC Registers" and "Table 10-99. EDMA3TC Registers".
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/dra7.dtsi | 33 +++++++++++++++++++++++++++------
1 file changed, 27 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -369,8 +369,15 @@ dra7_iodelay_core: padconf@4844a000 {
target-module@43300000 {
compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x43300000 0x4>;
- reg-names = "rev";
+ reg = <0x43300000 0x4>,
+ <0x43300010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
@@ -402,8 +409,15 @@ edma: dma@0 {
target-module@43400000 {
compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x43400000 0x4>;
- reg-names = "rev";
+ reg = <0x43400000 0x4>,
+ <0x43400010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
@@ -420,8 +434,15 @@ edma_tptc0: dma@0 {
target-module@43500000 {
compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x43500000 0x4>;
- reg-names = "rev";
+ reg = <0x43500000 0x4>,
+ <0x43500010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
--
2.30.0
next prev parent reply other threads:[~2021-01-26 19:06 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-26 8:26 [PATCH 00/27] Update dra7 to probe with genpd to drop legacy pdata Tony Lindgren
2021-01-26 8:26 ` [PATCH 01/27] PCI: pci-dra7xx: Prepare for deferred probe with module_platform_driver Tony Lindgren
2021-01-26 8:26 ` [PATCH 02/27] ARM: dts: Update pcie ranges for dra7 Tony Lindgren
2021-01-26 8:26 ` [PATCH 03/27] ARM: dts: Configure interconnect target module for dra7 pcie Tony Lindgren
2021-01-26 8:26 ` Tony Lindgren [this message]
2021-01-26 8:26 ` [PATCH 05/27] ARM: dts: Move dra7 l3 noc to a separate node Tony Lindgren
2021-01-26 8:26 ` [PATCH 06/27] ARM: dts: Configure interconnect target module for dra7 qspi Tony Lindgren
2021-01-26 8:26 ` [PATCH 07/27] ARM: dts: Configure interconnect target module for dra7 sata Tony Lindgren
2021-01-26 8:26 ` [PATCH 08/27] ARM: dts: Configure interconnect target module for dra7 mpu Tony Lindgren
2021-01-26 8:26 ` [PATCH 09/27] ARM: dts: Configure interconnect target module for dra7 dmm Tony Lindgren
2021-01-26 8:26 ` [PATCH 10/27] ARM: dts: Configure simple-pm-bus for dra7 l4_wkup Tony Lindgren
2021-01-26 8:27 ` [PATCH 11/27] ARM: dts: Configure simple-pm-bus for dra7 l4_per1 Tony Lindgren
2021-01-26 8:27 ` [PATCH 12/27] ARM: dts: Configure simple-pm-bus for dra7 l4_per2 Tony Lindgren
2021-01-26 8:27 ` [PATCH 13/27] ARM: dts: Configure simple-pm-bus for dra7 l4_per3 Tony Lindgren
2021-01-26 8:27 ` [PATCH 14/27] ARM: dts: Configure simple-pm-bus for dra7 l4_cfg Tony Lindgren
2021-01-26 8:27 ` [PATCH 15/27] ARM: dts: Configure simple-pm-bus for dra7 l3 Tony Lindgren
2021-01-26 8:27 ` [PATCH 16/27] ARM: OMAP2+: Drop legacy platform data for dra7 pcie Tony Lindgren
2021-01-26 8:27 ` [PATCH 17/27] ARM: OMAP2+: Drop legacy platform data for dra7 qspi Tony Lindgren
2021-01-26 8:27 ` [PATCH 18/27] ARM: OMAP2+: Drop legacy platform data for dra7 sata Tony Lindgren
2021-01-26 8:27 ` [PATCH 19/27] ARM: OMAP2+: Drop legacy platform data for dra7 mpu Tony Lindgren
2021-01-26 8:27 ` [PATCH 20/27] ARM: OMAP2+: Drop legacy platform data for dra7 dmm Tony Lindgren
2021-01-26 8:27 ` [PATCH 21/27] ARM: OMAP2+: Drop legacy platform data for dra7 l4_wkup Tony Lindgren
2021-01-26 8:27 ` [PATCH 22/27] ARM: OMAP2+: Drop legacy platform data for dra7 l4_per1 Tony Lindgren
2021-01-26 8:27 ` [PATCH 23/27] ARM: OMAP2+: Drop legacy platform data for dra7 l4_per2 Tony Lindgren
2021-01-26 8:27 ` [PATCH 24/27] ARM: OMAP2+: Drop legacy platform data for dra7 l4_per3 Tony Lindgren
2021-01-26 8:27 ` [PATCH 25/27] ARM: OMAP2+: Drop legacy platform data for dra7 l4_cfg Tony Lindgren
2021-01-26 8:27 ` [PATCH 26/27] ARM: OMAP2+: Drop legacy platform data for dra7 l3 Tony Lindgren
2021-01-26 8:27 ` [PATCH 27/27] ARM: OMAP2+: Drop legacy platform data for dra7 hwmod Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210126082716.54358-5-tony@atomide.com \
--to=tony@atomide.com \
--cc=balajitk@ti.com \
--cc=bcousson@baylibre.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).