From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1699CC433E0 for ; Sat, 13 Mar 2021 07:25:05 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id DDFCB64DF3 for ; Sat, 13 Mar 2021 07:25:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232331AbhCMHYc (ORCPT ); Sat, 13 Mar 2021 02:24:32 -0500 Received: from szxga07-in.huawei.com ([45.249.212.35]:14326 "EHLO szxga07-in.huawei.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230309AbhCMHYK (ORCPT ); Sat, 13 Mar 2021 02:24:10 -0500 Received: from DGGEMS403-HUB.china.huawei.com (unknown [172.30.72.58]) by szxga07-in.huawei.com (SkyGuard) with ESMTP id 4DyDdy4Rx6z8ww8; Sat, 13 Mar 2021 15:22:14 +0800 (CST) Received: from localhost.localdomain (10.175.118.36) by DGGEMS403-HUB.china.huawei.com (10.3.19.203) with Microsoft SMTP Server id 14.3.498.0; Sat, 13 Mar 2021 15:23:56 +0800 From: Chiqijun To: CC: , , , , , , Subject: [v4] PCI: Add reset quirk for Huawei Intelligent NIC virtual function Date: Sat, 13 Mar 2021 15:29:33 +0800 Message-ID: <20210313072933.2052-1-chiqijun@huawei.com> X-Mailer: git-send-email 2.17.1 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.175.118.36] X-CFilter-Loop: Reflected Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org When multiple VFs do FLR at the same time, the firmware is processed serially, resulting in some VF FLRs being delayed more than 100ms, when the virtual machine restarts and the device driver is loaded, the firmware is doing the corresponding VF FLR, causing the driver to fail to load. To solve this problem, add host and firmware status synchronization during FLR. Signed-off-by: Chiqijun --- v4: - Addressed Bjorn's review comments v3: - The MSE bit in the VF configuration space is hardwired to zero, remove the setting of PCI_COMMAND_MEMORY bit. Add comment for set PCI_COMMAND register. v2: - Update comments - Use the HINIC_VF_FLR_CAP_BIT_SHIFT and HINIC_VF_FLR_PROC_BIT_SHIFT macro instead of the magic number --- drivers/pci/quirks.c | 69 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 653660e3ba9e..4623125098e0 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -3913,6 +3913,73 @@ static int delay_250ms_after_flr(struct pci_dev *dev, int probe) return 0; } +#define PCI_DEVICE_ID_HINIC_VF 0x375E +#define HINIC_VF_FLR_TYPE 0x1000 +#define HINIC_VF_FLR_CAP_BIT_SHIFT 30 +#define HINIC_VF_OP 0xE80 +#define HINIC_VF_FLR_PROC_BIT_SHIFT 18 +#define HINIC_OPERATION_TIMEOUT 15000 /* 15 seconds */ + +/* Device-specific reset method for Huawei Intelligent NIC virtual functions */ +static int reset_hinic_vf_dev(struct pci_dev *pdev, int probe) +{ + unsigned long timeout; + void __iomem *bar; + u32 val; + + if (probe) + return 0; + + bar = pci_iomap(pdev, 0, 0); + if (!bar) + return -ENOTTY; + + /* Get and check firmware capabilities. */ + val = be32_to_cpu(readl(bar + HINIC_VF_FLR_TYPE)); + if (!(val & (1UL << HINIC_VF_FLR_CAP_BIT_SHIFT))) { + pci_iounmap(pdev, bar); + return -ENOTTY; + } + + /* + * Set the processing bit for the start of FLR, which will be cleared + * by the firmware after FLR is completed. + */ + val = be32_to_cpu(readl(bar + HINIC_VF_OP)); + val = val | (1UL << HINIC_VF_FLR_PROC_BIT_SHIFT); + writel(cpu_to_be32(val), bar + HINIC_VF_OP); + + /* Perform the actual device function reset */ + pcie_flr(pdev); + + /* + * The device must learn BDF after FLR in order to respond to BAR's + * read request, therefore, we issue a configure write request to let + * the device capture BDF. + */ + pci_write_config_word(pdev, PCI_VENDOR_ID, 0); + + /* Waiting for device reset complete */ + timeout = jiffies + msecs_to_jiffies(HINIC_OPERATION_TIMEOUT); + do { + val = be32_to_cpu(readl(bar + HINIC_VF_OP)); + if (!(val & (1UL << HINIC_VF_FLR_PROC_BIT_SHIFT))) + goto reset_complete; + msleep(20); + } while (time_before(jiffies, timeout)); + + val = be32_to_cpu(readl(bar + HINIC_VF_OP)); + if (!(val & (1UL << HINIC_VF_FLR_PROC_BIT_SHIFT))) + goto reset_complete; + + pci_warn(pdev, "Reset dev timeout, flr ack reg: %#010x\n", val); + +reset_complete: + pci_iounmap(pdev, bar); + + return 0; +} + static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, reset_intel_82599_sfp_virtfn }, @@ -3924,6 +3991,8 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { { PCI_VENDOR_ID_INTEL, 0x0953, delay_250ms_after_flr }, { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, reset_chelsio_generic_dev }, + { PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_HINIC_VF, + reset_hinic_vf_dev }, { 0 } }; -- 2.17.1