linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: Dan Williams <dan.j.williams@intel.com>
Cc: <linux-cxl@vger.kernel.org>,
	Linux PCI <linux-pci@vger.kernel.org>,
	"Ben Widawsky" <ben.widawsky@intel.com>,
	Bjorn Helgaas <helgaas@kernel.org>,
	"Chris Browy" <cbrowy@avery-design.com>,
	Linux ACPI <linux-acpi@vger.kernel.org>,
	"Schofield, Alison" <alison.schofield@intel.com>,
	Vishal L Verma <vishal.l.verma@intel.com>,
	"Weiny, Ira" <ira.weiny@intel.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	Linuxarm <linuxarm@huawei.com>, Fangjian <f.fangjian@huawei.com>
Subject: Re: [RFC PATCH 1/2] PCI/doe: Initial support PCI Data Object Exchange
Date: Tue, 16 Mar 2021 16:29:52 +0000	[thread overview]
Message-ID: <20210316162952.00001ab7@Huawei.com> (raw)
In-Reply-To: <CAPcyv4gG-==Vj9w3d7=gRRSPaoD5eZHZZ2hAA0h3c07eMT_x1A@mail.gmail.com>

On Mon, 15 Mar 2021 12:45:49 -0700
Dan Williams <dan.j.williams@intel.com> wrote:

> Hey Jonathan, happy to see this, some comments below...

Hi Dan,

Thanks for taking a look!

> 
> On Wed, Mar 10, 2021 at 10:08 AM Jonathan Cameron
> <Jonathan.Cameron@huawei.com> wrote:
> >
> > Introduced in an ECN to the PCI 5.0, DOE provides a config space
> > based mailbox with standard protocol discovery.  Each mailbox
> > is accessed through a DOE PCIE Extended Capability.
> >
> > A device may have 1 or more DOE mailboxes, each of which is allowed
> > to support any number of protocols (some DOE protocols
> > specifications apply additional restrictions).  A given protocol
> > may be supported on more than one DOE mailbox on a given function.  
> 
> Are all those protocol instances shared?
> I'm trying to mental model
> whether, for example, an auxiliary driver instance could be loaded per
> DOE mailbox, or if there would need to be coordination of a given
> protocol no matter how many DOE mailboxes on that device implemented
> that protocol.

Just to check I've understood corectly, you mean multiple instances of same
protocol across different DOE mailboxes on a given device?

At DOE ECN level I don't think it is actually defined if they can
interact or not.  I've trawled though the released protocols that I know of
to see if there is a consensus but not finding much information.

I would argue however that there would be no reason to have the OS make
use of more than one DOE mailbox for the same protocol. Bit fiddly to
handle, but doesn't seem impossible to only register a protocol with first
DOE that supports it.

CMA does talk about use of multiple methods to communicate with the device
and the need for results consistency. However that is referring to out of
band vs DOE rather than multiple DOEs.  Plus it isn't making statements
about protocol coordination just responses to particular queries.

Things might get crazy if you tried to do IDE setup from two different DOE
mailboxes. The IDE ECN refers to "the specific instance of DOE used for..."
implying I think that there might be multiple but software should only
use one of them?

My other gut feeling is that only some of the DOE mailboxes are ever going
to be in the control of Linux. IDE calls out models where firmware or a TEE is
responsible for it for example. I'm not sure how that is going to be communicated
to the OS (can guess of course)

Sub drivers are a plausible model that I'll think about some more - but
for now it feels like too early to go that way..

> 
> >
> > The current infrastructure is fairly simplistic and pushes the burden
> > of handling this many-to-many relantionship to the drivers. In many  
> 
> s/relantionship/relationship/
> 
> > cases the arrangement will be static, making this straight forward.
> >
> > Open questions:
> > * timeouts: The DOE specification allows for 1 second for some
> >   operations, but notes that specific protocols may have different
> >   requirements. Should we introduce the flexiblity now, or leave  
> 
> s/flexiblity/flexibility/

Gah. One day I'll remember to spell check. Sorry about that.

> 
> >   that to be implemented when support for such a protocol is added?  
> 
> If the timeout is property of the protocol then perhaps it should wait
> and not be modeled at the transport level, but that's just an initial
> reaction. I have not spent quality time with the DOE spec.

I'm not sure it's possible to do so without breaking the abstraction of
DOE request / response into a bunch of messy sub steps.  Perhaps there is
a clean way of doing it but I can't immediately think of it.

If a protocol comes along that varies the timeout we can just add
a parameter to say what it is on a call by call basis.

> 
> > * DOE mailboxes may use MSI / MSIX to signal that the have prepared
> >   a response. These require normal conditions are setup by the driver.
> >   Should we move some of this into the DOE support (such as ensuring
> >   bus mastering is enabled)?  
> 
> DOE support seems suitable to just be a library and leave the
> host-device management to the host driver.

Agreed.  Though might be worth some debug checks.

Speaking from experience it's easy to spend half a day wondering why your
interrupts aren't turning up (I was blaming QEMU) because bus mastering
wasn't enabled.

> 
> > Testing conducted against QEMU using:
> >
> > https://lore.kernel.org/qemu-devel/1612900760-7361-1-git-send-email-cbrowy@avery-design.com/
> > + fix for interrupt flag mentioned in that thread.
> >  
> 
> I came across this the other day and made me wonder about SPDM
> emulation as another test case:
> 
> https://cfp.osfc.io/media/osfc2020/submissions/ECQ88N/resources/An_open_source_SPDM_implementation_for_secure_devi_kmIgAQe.pdf

Nice!  Looking at CMA / IDE emulation was on my todo list and that looks like
it might make that job a lot easier.

> 
> 
> > Additional testing to be done, particularly around error handling.
> >
> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Anything not commented on should be in v2.

> > ---
> >  drivers/pci/pcie/Kconfig      |   8 +
> >  drivers/pci/pcie/Makefile     |   1 +
> >  drivers/pci/pcie/doe.c        | 284 ++++++++++++++++++++++++++++++++++
> >  include/linux/pcie-doe.h      |  35 +++++
> >  include/uapi/linux/pci_regs.h |  29 +++-
> >  5 files changed, 356 insertions(+), 1 deletion(-)
> 
> > diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
> > index b2980db88cc0..801fdd5fbfc1 100644
> > --- a/drivers/pci/pcie/Makefile
> > +++ b/drivers/pci/pcie/Makefile
> > @@ -13,3 +13,4 @@ obj-$(CONFIG_PCIE_PME)                += pme.o
> >  obj-$(CONFIG_PCIE_DPC)         += dpc.o
> >  obj-$(CONFIG_PCIE_PTM)         += ptm.o
> >  obj-$(CONFIG_PCIE_EDR)         += edr.o
> > +obj-$(CONFIG_PCIE_DOE)         += doe.o
> > diff --git a/drivers/pci/pcie/doe.c b/drivers/pci/pcie/doe.c
> > new file mode 100644
> > index 000000000000..b091ef379362
> > --- /dev/null
> > +++ b/drivers/pci/pcie/doe.c
> > @@ -0,0 +1,284 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Data Object Exchange was added to the PCI spec as an ECN to 5.0.  
> 
> Perhaps just put the ECN link here?

It's by number so I've left the title here as well as a link.

> 
> > + *
> > + * Copyright (C) 2021 Huawei
> > + *     Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/delay.h>
> > +#include <linux/jiffies.h>
> > +#include <linux/mutex.h>
> > +#include <linux/pci.h>
> > +#include <linux/pcie-doe.h>
> > +
> > +static irqreturn_t doe_irq(int irq, void *data)
> > +{
> > +       struct pcie_doe *doe = data;
> > +       struct pci_dev *pdev = doe->pdev;
> > +       u32 val;
> > +
> > +       pci_read_config_dword(pdev, doe->cap_offset + PCI_DOE_STATUS, &val);
> > +       if (FIELD_GET(PCI_DOE_STATUS_INT_STATUS, val)) {
> > +               pci_write_config_dword(pdev, doe->cap_offset + PCI_DOE_STATUS,
> > +                                      val);
> > +               complete(&doe->c);
> > +               return IRQ_HANDLED;
> > +       }
> > +       /* Leave the error case to be handled outside irq */
> > +       if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) {
> > +               complete(&doe->c);
> > +               return IRQ_HANDLED;
> > +       }  
> 
> Only one DOE command can be outstanding at a time per PCI device? 

No, unless I'm missing something, that is one command per DOE mailbox at a time.
The completion is part of the pcie_doe structure, not the pci_dev.
That represents a single DOE mailbox.

There can be multiple commands in flight to multiple DOE mailboxes. Not clear
that there ever will be in real use cases however.

This comes up later wrt to async operation.  The mailbox only
supports one request / response cycle at a time, they cannot be overlapped.

> This
> seems insufficient in the multi-mailbox case / feels like there should
> be a 'struct pcie_doe_request' object to track what it is to be
> completed.

No need for the complexity with one request / response in flight per
mailbox at a time and each mailbox having separate state maintenance.

> 
> > +
> > +       return IRQ_NONE;
> > +}
> > +
> > +static int pcie_doe_abort(struct pcie_doe *doe)
> > +{
> > +       struct pci_dev *pdev = doe->pdev;
> > +       int retry = 0;
> > +       u32 val;
> > +
> > +       pci_write_config_dword(pdev, doe->cap_offset + PCI_DOE_CTRL,
> > +                              PCI_DOE_CTRL_ABORT);
> > +       /* Abort is allowed to take up to 1 second */
> > +       do {
> > +               retry++;
> > +               pci_read_config_dword(pdev, doe->cap_offset + PCI_DOE_STATUS,
> > +                                     &val);
> > +               if (FIELD_GET(PCI_DOE_STATUS_ERROR, val) &&
> > +                   !FIELD_GET(PCI_DOE_STATUS_BUSY, val))
> > +                       return 0;
> > +               usleep_range(1000, 2000);
> > +       } while (retry < 1000);
> > +
> > +       return -EIO;  
> 
> What's the state of the mailbox after an abort failure?

Good question.  I think the answer to that is dead device, reboot the machine
or at least the device if you can do a hard enough slot reset.

The specification goes with...
"It is strongly recommend that implementations ensure that the functionality
of the DOE Abort bit is resilient, including that DOE Abort functionality is
maintained even in cases where device firmware is malfunctioning"

So cross our fingers everyone obeys that strong recommendation or try to
work out what to do?

> 
> > +}
> > +
> > +/**
> > + * pcie_doe_init() - Initialise a Data Object Exchange mailbox
> > + * @doe: state structure for the DOE mailbox
> > + * @pdev: pci device which has this DOE mailbox
> > + * @doe_offset: offset in configuration space of the DOE extended capability.
> > + * @use_int: whether to use the optional interrupt
> > + * Returns: 0 on success, <0 on error
> > + *
> > + * Caller responsible for calling pci_alloc_irq_vectors() including DOE
> > + * interrupt.
> > + */
> > +int pcie_doe_init(struct pcie_doe *doe, struct pci_dev *pdev, int doe_offset,
> > +                 bool use_int)
> > +{
> > +       u32 val;
> > +       int rc;
> > +
> > +       mutex_init(&doe->lock);
> > +       init_completion(&doe->c);
> > +       doe->cap_offset = doe_offset;
> > +       doe->pdev = pdev;
> > +       /* Reset the mailbox by issuing an abort */
> > +       rc = pcie_doe_abort(doe);
> > +       if (rc)
> > +               return rc;
> > +
> > +       pci_read_config_dword(pdev, doe_offset + PCI_DOE_CAP, &val);
> > +
> > +       if (use_int && FIELD_GET(PCI_DOE_CAP_INT, val)) {
> > +               rc = devm_request_irq(&pdev->dev,  
> 
> Lets not hide devm semantics from the caller, so at a minimum this
> function should be called pcim_pcie_doe_init() to indicate to the
> caller that it has placed something into the devm stack. However, this
> may not be convenient for the caller. I'd leave it to the user to call
> a pcie_doe() unregister routine via devm_add_action_or_reset() if it
> wants.

> 
> Lastly, I don't expect _init() routines to fail so perhaps split this
> into pure "init" and "register" functionality?

I'm a bit doubtful on naming of register() but will go with that for v2.

It's not registering with anything so that feels a bit wrong as a description
for part 2 of setup.  Can leave that bike shedding for now though.

> 
> > +                                     pci_irq_vector(pdev,
> > +                                                    FIELD_GET(PCI_DOE_CAP_IRQ, val)),
> > +                                     doe_irq, 0, "DOE", doe);
> > +               if (rc)
> > +                       return rc;
> > +
> > +               doe->use_int = use_int;
> > +               pci_write_config_dword(pdev, doe_offset + PCI_DOE_CTRL,
> > +                                      FIELD_PREP(PCI_DOE_CTRL_INT_EN, 1));
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +
> > +/**
> > + * pcie_doe_exchange() - Send a request and receive a response
> > + * @doe: DOE mailbox state structure
> > + * @request: request data to be sent
> > + * @request_sz: size of request in bytes
> > + * @response: buffer into which to place the response
> > + * @response_sz: size of available response buffer in bytes
> > + *
> > + * Return: 0 on success, < 0 on error
> > + * Excess data will be discarded.
> > + */
> > +int pcie_doe_exchange(struct pcie_doe *doe, u32 *request, size_t request_sz,
> > +                     u32 *response, size_t response_sz)  
> 
> Are requests made against a specific protocol?

Yes, but the descriptive header is very brea.

> 
> This interface feels under-decorated for a public API for host-drivers to use.

I'll see what I can come up with for v2.
Likely to look something like

int pcie_doe_exchange(struct pci_doe *doe, u16 vid, u8 type,
		      u32 *request_pl, size_t request_pl_sz,
		      u32 *response_pl, size_t response_pl_sz)

and return received length or negative on error.

The disadvantage is that at least some of the specs just have the
header as their first few DW.  So there isn't a clear distinction
between header and payload. May lead to people getting offsets wrong
in a way they wouldn't do if driver was responsible for building the
whole message.

> 
> > +{
> > +       struct pci_dev *pdev = doe->pdev;
> > +       int ret = 0;
> > +       int i;
> > +       u32 val;
> > +       int retry = -1;
> > +       size_t length;
> > +
> > +       /* DOE requests must be a whole number of DW */
> > +       if (request_sz % sizeof(u32))
> > +               return -EINVAL;
> > +
> > +       /* Need at least 2 DW to get the length */
> > +       if (response_sz < 2 * sizeof(u32))
> > +               return -EINVAL;
> > +
> > +       mutex_lock(&doe->lock);
> > +       /*
> > +        * Check the DOE busy bit is not set.
> > +        * If it is set, this could indicate someone other than Linux is
> > +        * using the mailbox.
> > +        */  
> 
> Ugh, makes me think we need to extend the support for blocking pci
> device MMIO while a driver is attached to config-space as well. How
> can a communication protocol work if initiators can trample each
> other's state?

Agreed. It is crazy. At very least we need a means of saying
keep your hands off this DOE to the OS.

We can't do it on a per protocol basis, which was what I was previously
thinking, because we can't call the discovery protocol to see what
a given DOE is for.

> 
> > +       pci_read_config_dword(pdev, doe->cap_offset + PCI_DOE_STATUS, &val);
> > +       if (FIELD_GET(PCI_DOE_STATUS_BUSY, val)) {
> > +               ret = -EBUSY;
> > +               goto unlock;
> > +       }
> > +
> > +       if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) {
> > +               ret = pcie_doe_abort(doe);
> > +               if (ret)
> > +                       goto unlock;
> > +       }
> > +
> > +       for (i = 0; i < request_sz / 4; i++)
> > +               pci_write_config_dword(pdev, doe->cap_offset + PCI_DOE_WRITE,
> > +                                      request[i]);
> > +
> > +       reinit_completion(&doe->c);
> > +       pci_write_config_dword(pdev, doe->cap_offset + PCI_DOE_CTRL,
> > +                              PCI_DOE_CTRL_GO);
> > +
> > +       if (doe->use_int) {
> > +               /*
> > +                * Timeout of 1 second from 6.xx.1 ECN - Data Object Exchange
> > +                * Note a protocol is allowed to specify a different timeout, so
> > +                * that may need supporting in future.
> > +                */
> > +               if (!wait_for_completion_timeout(&doe->c,
> > +                                                msecs_to_jiffies(1000))) {  
> 
> s/msecs_to_jiffies(1000)/HZ/

huh. Missed that :)

> 
> > +                       ret = -ETIMEDOUT;
> > +                       goto unlock;
> > +               }
> > +
> > +               pci_read_config_dword(pdev,
> > +                                     doe->cap_offset + PCI_DOE_STATUS,
> > +                                     &val);
> > +               if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) {
> > +                       pcie_doe_abort(doe);
> > +                       ret = -EIO;
> > +                       goto unlock;
> > +               }
> > +       } else {
> > +               do {
> > +                       retry++;
> > +                       pci_read_config_dword(pdev,
> > +                                             doe->cap_offset + PCI_DOE_STATUS,
> > +                                             &val);
> > +                       if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) {
> > +                               pcie_doe_abort(doe);
> > +                               ret = -EIO;
> > +                               goto unlock;
> > +                       }
> > +
> > +                       if (FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val))
> > +                               break;
> > +                       usleep_range(1000, 2000);
> > +               } while (retry < 1000);
> > +               if (!FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) {
> > +                       ret = -ETIMEDOUT;
> > +                       goto unlock;  
> 
> Rather than a lock and polling loop I'd organize this as a single
> threaded delayed_workqueue that periodically services requests or
> immediately runs the workqueue upon receipt of an interrupt. This
> provides a software queuing model that can optionally be treated as
> async / sync depending on the use case.

Given it's single element in flight I don't think there is any benefit
to enabling async.  The lock has to be held throughout anyway.
It is always possible a particular caller wants to overlap this
transaction with some other actions, but I'd rather put the burden
on that clever caller which can spin this out to a thread of one type
or another.

We can revisit and split this in half if we have a user who benefits
from the complexity.

> 
> 
> > +               }
> > +       }
> > +
> > +       /* Read the first two dwords to get the length */
> > +       pci_read_config_dword(pdev, doe->cap_offset + PCI_DOE_READ,
> > +                             &response[0]);
> > +       pci_write_config_dword(pdev, doe->cap_offset + PCI_DOE_READ, 0);
> > +       pci_read_config_dword(pdev, doe->cap_offset + PCI_DOE_READ,
> > +                             &response[1]);
> > +       pci_write_config_dword(pdev, doe->cap_offset + PCI_DOE_READ, 0);
> > +       length = FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH,
> > +                          response[1]);
> > +       if (length > SZ_1M)

oops. That's exiting with mutex held. Fixed in v2.

> > +               return -EIO;
> > +
> > +       for (i = 2; i < min(length, response_sz / 4); i++) {
> > +               pci_read_config_dword(pdev, doe->cap_offset + PCI_DOE_READ,
> > +                                     &response[i]);
> > +               pci_write_config_dword(pdev, doe->cap_offset + PCI_DOE_READ, 0);
> > +       }
> > +       /* flush excess length */
> > +       for (; i < length; i++) {
> > +               pci_read_config_dword(pdev, doe->cap_offset + PCI_DOE_READ,
> > +                                     &val);
> > +               pci_write_config_dword(pdev, doe->cap_offset + PCI_DOE_READ, 0);
> > +       }
> > +       /* Final error check to pick up on any since Data Object Ready */
> > +       pci_read_config_dword(pdev, doe->cap_offset + PCI_DOE_STATUS, &val);
> > +       if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) {
> > +               pcie_doe_abort(doe);
> > +               ret = -EIO;
> > +       }
> > +unlock:
> > +       mutex_unlock(&doe->lock);
> > +
> > +       return ret;
> > +}
> > +
> > +
> > +static int pcie_doe_discovery(struct pcie_doe *doe, u8 *index, u16 *vid, u8 *protocol)
> > +{
> > +       u32 request[3] = {  
> 
> Should this be a proper struct with named fields rather than an array?

Well the field names are going to end up as dw0 dw1 etc as there isn't a lot more
meaningful to call them.  We also want to keep them as u32 values throughout to
avoid fiddly packing manipulation on different endian machines.

This becomes rather simpler when it's just the payload due to changes in the
interface in v2.

> 
> > +               [0] = FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_VID, 0001) |
> > +               FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, 0),
> > +               [1] = FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, 3),
> > +               [2] = FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX, *index)
> > +       };
> > +       u32 response[3];
> > +       int ret;
> > +
> > +       ret = pcie_doe_exchange(doe, request, sizeof(request), response, sizeof(response));
> > +       if (ret)
> > +               return ret;
> > +
> > +       *vid = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID, response[2]);
> > +       *protocol = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL, response[2]);
> > +       *index = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX, response[2]);
> > +
> > +       return 0;
> > +}
> > +
> > +/**
> > + * pcie_doe_protocol_check() - check if this DOE mailbox supports specific protocol
> > + * @doe: DOE state structure
> > + * @vid: Vendor ID
> > + * @protocol: Protocol number as defined by Vendor
> > + * Returns: 0 on success, <0 on error
> > + */
> > +int pcie_doe_protocol_check(struct pcie_doe *doe, u16 vid, u8 protocol)  
> 
> Not clear to me that this is a comfortable API for a driver. I would
> expect that at registration time all the supported protocols would be
> retrieved and cached in the 'struct pcie_doe' context and then the
> host driver could query from there without going back to the device
> again.

I'm not sure I follow.

Any driver will fall into one of the following categories:
a) Already knows what protocols are available on a
   given DOE instance perhaps because that's a characteristic of the hardware
   supported, in which case it has no reason to check (unless driver writer
   is paranoid)
b) It has no way to know (e.g. class driver), then it makes sense to query
   the DOE instance to find out what protocols are available.

Absolutely we could cache them, but it wouldn't change the interface
presented to the driver. I think doing so at this stage is
premature optimization.

We could present this at a different level and wrap it up as a
find_doe that will return a DOE instance that supports the desired
protocol, but then that puts the burden of reference counting etc
for the different DOE instances on the core - the one thing I think
we want to avoid.

So far we have no evidence any device will actually need that.

Of the existing protocols, only a few are allowed to coexist with
each other and in well defined sets (CMA and IDE for example).

An alternative model we could look at (which is much more complex)
is to have something like the following: 

struct pcie_doe_set - Central location which is responsible for
all DOE mailboxes on a PCI device.

At init that scans all DOE mailboxes and builds a look up table
from [vid, protocol] to [struct pcie_doe]
Note this is 1 to 1, so if a protocol is supported on multiple
mailboxes we use the first one.

pcie_doe_exchange(struct pcie_doe_set, u16 vid, u8 protocol...)
Looks up the relevant DOE instance and does exchange on that.

So far I'm not convinced we should engage in this complexity.
Nothing stops us adding it if and when it becomes apparent we
actually need it.

An intermediate point would be to add basic list and reference
counting infrastructure so that a driver can call

struct pcie_doe *pcie_doe_get(struct pci_dev, u16 vid, u8 protocol)
void pci_doe_put(struct pci_doe *doe);

That means at least a list_head and possibly a lock being added
to pci_dev. Not sure how Bjorn will feel about that.

I might see how bad this looks for v2.

> 
> > +{
> > +       u8 index = 0;
> > +
> > +       do {
> > +               u8 this_protocol;
> > +               u16 this_vid;
> > +               int ret;
> > +
> > +               ret = pcie_doe_discovery(doe, &index, &this_vid, &this_protocol);
> > +               if (ret)
> > +                       return ret;
> > +               if (this_vid == vid && this_protocol == protocol)
> > +                       return 0;
> > +       } while (index);
> > +
> > +       return -ENODEV;
> > +}
> > diff --git a/include/linux/pcie-doe.h b/include/linux/pcie-doe.h
> > new file mode 100644
> > index 000000000000..36eaa8532254
> > --- /dev/null
> > +++ b/include/linux/pcie-doe.h
> > @@ -0,0 +1,35 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Data Object Exchange was added to the PCI spec as an ECN to 5.0.
> > + *
> > + * Copyright (C) 2021 Huawei
> > + *     Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > + */
> > +
> > +#include <linux/completion.h>
> > +#include <linux/mutex.h>
> > +
> > +#ifndef LINUX_PCIE_DOE_H
> > +#define LINUX_PCIE_DOE_H
> > +/**
> > + * struct pcie_doe - State to support use of DOE mailbox
> > + * @lock: Ensure users of the mailbox are serialized
> > + * @cap_offset: Config space offset to base of DOE capability.
> > + * @pdev: PCI device that hosts this DOE.
> > + * @c: Completion used for interrupt handling.
> > + * @use_int: Flage to indicate if interrupts rather than polling used.
> > + */
> > +struct pcie_doe {
> > +       struct mutex lock;
> > +       int cap_offset;  
> 
> s/cap_offset/cap/
> 
> ...to save some typing and be more idiomatic with other PCIE
> capability based drivers.
> 
> > +       struct pci_dev *pdev;
> > +       struct completion c;
> > +       bool use_int;  
> 
> Typically the polarity of this variable is flipped to whether polled
> operation is enabled or not. I.e. s/use_int/poll/.

This went away in v2 as we now store the irq to allow it to be removed
in _unregister.

I did change to poll as a parameter to relevant functions

> 
> > +};
> > +
> > +int pcie_doe_init(struct pcie_doe *doe, struct pci_dev *dev, int doe_offset,
> > +                 bool use_int);
> > +int pcie_doe_exchange(struct pcie_doe *doe, u32 *request, size_t request_sz,
> > +                     u32 *response, size_t response_sz);
> > +int pcie_doe_protocol_check(struct pcie_doe *doe, u16 vid, u8 protocol);  
> 
> 
> > +#endif

I'll work up a v2 with the above changes and have a mess with list based
handling and reference counting for the DOE instances.

Jonathan

  reply	other threads:[~2021-03-16 16:32 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-10 18:03 [RFC PATCH 0/2] PCI Data Object Exchange support + CXL CDAT Jonathan Cameron
2021-03-10 18:03 ` [RFC PATCH 1/2] PCI/doe: Initial support PCI Data Object Exchange Jonathan Cameron
2021-03-15 19:45   ` Dan Williams
2021-03-16 16:29     ` Jonathan Cameron [this message]
2021-03-16 16:57       ` Jonathan Cameron
2021-03-16 18:14       ` Dan Williams
2021-03-16 23:26         ` Chris Browy
2021-03-18  1:30           ` Dan Williams
2021-03-18 14:25             ` Jonathan Cameron
2021-06-17 17:12               ` Jonathan Cameron
2021-06-17 19:48                 ` Chris Browy
2021-03-23 18:22         ` Jonathan Cameron
2021-03-23 18:57           ` Dan Williams
2021-03-10 18:03 ` [RFC PATCH 2/2] cxl/mem: Add CDAT table reading from DOE Jonathan Cameron
2021-03-10 18:14   ` Jonathan Cameron
2021-03-10 22:59     ` Chris Browy
2021-03-15 22:00     ` Dan Williams
2021-03-16 10:36       ` Jonathan Cameron
2021-03-17  1:42         ` Dan Williams
2021-03-17  1:55   ` Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210316162952.00001ab7@Huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=alison.schofield@intel.com \
    --cc=ben.widawsky@intel.com \
    --cc=cbrowy@avery-design.com \
    --cc=dan.j.williams@intel.com \
    --cc=f.fangjian@huawei.com \
    --cc=helgaas@kernel.org \
    --cc=ira.weiny@intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).