linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Jonathan Corbet <corbet@lwn.net>, Jens Axboe <axboe@kernel.dk>,
	Viresh Kumar <vireshk@kernel.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Vinod Koul <vkoul@kernel.org>, David Miller <davem@davemloft.net>,
	Lee Jones <lee.jones@linaro.org>,
	Ion Badulescu <ionut@badula.org>,
	Jakub Kicinski <kuba@kernel.org>,
	Lino Sanfilippo <LinoSanfilippo@gmx.de>,
	Christian Lamparter <chunkeey@googlemail.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	Luis Chamberlain <mcgrof@kernel.org>,
	Adam Radford <aradford@gmail.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	James Smart <james.smart@broadcom.com>,
	Dick Kennedy <dick.kennedy@broadcom.com>,
	Nilesh Javali <njavali@marvell.com>,
	GR-QLogic-Storage-Upstream@marvell.com,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jirislaby@kernel.org>,
	Peter Chen <Peter.Chen@nxp.com>, Felipe Balbi <balbi@kernel.org>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	linux-doc@vger.kernel.org,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-ide@vger.kernel.org, dmaengine@vger.kernel.org,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	linux-parisc@vger.kernel.org,
	linux-wireless <linux-wireless@vger.kernel.org>,
	SCSI development list <linux-scsi@vger.kernel.org>,
	linux-serial@vger.kernel.org,
	Linux USB Mailing List <linux-usb@vger.kernel.org>,
	Randy Dunlap <rdunlap@infradead.org>,
	Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH] PCI: Remove pci_try_set_mwi
Date: Fri, 26 Mar 2021 16:26:55 -0500	[thread overview]
Message-ID: <20210326212655.GA912670@bjorn-Precision-5520> (raw)
In-Reply-To: <4d535d35-6c8c-2bd8-812b-2b53194ce0ec@gmail.com>

[+cc Randy, Andrew (though I'm sure you have zero interest in this
ancient question :))]

On Wed, Dec 09, 2020 at 09:31:21AM +0100, Heiner Kallweit wrote:
> pci_set_mwi() and pci_try_set_mwi() do exactly the same, just that the
> former one is declared as __must_check. However also some callers of
> pci_set_mwi() have a comment that it's an optional feature. I don't
> think there's much sense in this separation and the use of
> __must_check. Therefore remove pci_try_set_mwi() and remove the
> __must_check attribute from pci_set_mwi().
> I don't expect either function to be used in new code anyway.

There's not much I like better than removing things.  But some
significant thought went into adding pci_try_set_mwi() in the first
place, so I need a little more convincing about why it's safe to
remove it.

The argument should cite the discussion about adding it.  I think one
of the earliest conversations is here:
https://lore.kernel.org/linux-ide/20070404213704.224128ec.randy.dunlap@oracle.com/

> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> patch applies on top of pci/misc for v5.11
> ---
>  Documentation/PCI/pci.rst                     |  5 +----
>  drivers/ata/pata_cs5530.c                     |  2 +-
>  drivers/ata/sata_mv.c                         |  2 +-
>  drivers/dma/dw/pci.c                          |  2 +-
>  drivers/dma/hsu/pci.c                         |  2 +-
>  drivers/ide/cs5530.c                          |  2 +-
>  drivers/mfd/intel-lpss-pci.c                  |  2 +-
>  drivers/net/ethernet/adaptec/starfire.c       |  2 +-
>  drivers/net/ethernet/alacritech/slicoss.c     |  2 +-
>  drivers/net/ethernet/dec/tulip/tulip_core.c   |  5 +----
>  drivers/net/ethernet/sun/cassini.c            |  4 ++--
>  drivers/net/wireless/intersil/p54/p54pci.c    |  2 +-
>  .../intersil/prism54/islpci_hotplug.c         |  3 +--
>  .../wireless/realtek/rtl818x/rtl8180/dev.c    |  2 +-
>  drivers/pci/pci.c                             | 19 -------------------
>  drivers/scsi/3w-9xxx.c                        |  4 ++--
>  drivers/scsi/3w-sas.c                         |  4 ++--
>  drivers/scsi/csiostor/csio_init.c             |  2 +-
>  drivers/scsi/lpfc/lpfc_init.c                 |  2 +-
>  drivers/scsi/qla2xxx/qla_init.c               |  8 ++++----
>  drivers/scsi/qla2xxx/qla_mr.c                 |  2 +-
>  drivers/tty/serial/8250/8250_lpss.c           |  2 +-
>  drivers/usb/chipidea/ci_hdrc_pci.c            |  2 +-
>  drivers/usb/gadget/udc/amd5536udc_pci.c       |  2 +-
>  drivers/usb/gadget/udc/net2280.c              |  2 +-
>  drivers/usb/gadget/udc/pch_udc.c              |  2 +-
>  include/linux/pci.h                           |  5 ++---
>  27 files changed, 33 insertions(+), 60 deletions(-)
> 
> diff --git a/Documentation/PCI/pci.rst b/Documentation/PCI/pci.rst
> index 814b40f83..120362cc9 100644
> --- a/Documentation/PCI/pci.rst
> +++ b/Documentation/PCI/pci.rst
> @@ -226,10 +226,7 @@ If the PCI device can use the PCI Memory-Write-Invalidate transaction,
>  call pci_set_mwi().  This enables the PCI_COMMAND bit for Mem-Wr-Inval
>  and also ensures that the cache line size register is set correctly.
>  Check the return value of pci_set_mwi() as not all architectures
> -or chip-sets may support Memory-Write-Invalidate.  Alternatively,
> -if Mem-Wr-Inval would be nice to have but is not required, call
> -pci_try_set_mwi() to have the system do its best effort at enabling
> -Mem-Wr-Inval.
> +or chip-sets may support Memory-Write-Invalidate.
>  
>  
>  Request MMIO/IOP resources
> diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
> index ad75d02b6..8654b3ae1 100644
> --- a/drivers/ata/pata_cs5530.c
> +++ b/drivers/ata/pata_cs5530.c
> @@ -214,7 +214,7 @@ static int cs5530_init_chip(void)
>  	}
>  
>  	pci_set_master(cs5530_0);
> -	pci_try_set_mwi(cs5530_0);
> +	pci_set_mwi(cs5530_0);
>  
>  	/*
>  	 * Set PCI CacheLineSize to 16-bytes:
> diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
> index 664ef658a..ee37755ea 100644
> --- a/drivers/ata/sata_mv.c
> +++ b/drivers/ata/sata_mv.c
> @@ -4432,7 +4432,7 @@ static int mv_pci_init_one(struct pci_dev *pdev,
>  	mv_print_info(host);
>  
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  	return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
>  				 IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht);
>  }
> diff --git a/drivers/dma/dw/pci.c b/drivers/dma/dw/pci.c
> index 1142aa6f8..1c20b7485 100644
> --- a/drivers/dma/dw/pci.c
> +++ b/drivers/dma/dw/pci.c
> @@ -30,7 +30,7 @@ static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
>  	}
>  
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
>  	if (ret)
> diff --git a/drivers/dma/hsu/pci.c b/drivers/dma/hsu/pci.c
> index 07cc7320a..420dd3706 100644
> --- a/drivers/dma/hsu/pci.c
> +++ b/drivers/dma/hsu/pci.c
> @@ -73,7 +73,7 @@ static int hsu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  	}
>  
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
>  	if (ret)
> diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c
> index 5bb46e713..5d2c421ab 100644
> --- a/drivers/ide/cs5530.c
> +++ b/drivers/ide/cs5530.c
> @@ -168,7 +168,7 @@ static int init_chipset_cs5530(struct pci_dev *dev)
>  	 */
>  
>  	pci_set_master(cs5530_0);
> -	pci_try_set_mwi(cs5530_0);
> +	pci_set_mwi(cs5530_0);
>  
>  	/*
>  	 * Set PCI CacheLineSize to 16-bytes:
> diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c
> index 2d7c588ef..a0c3be750 100644
> --- a/drivers/mfd/intel-lpss-pci.c
> +++ b/drivers/mfd/intel-lpss-pci.c
> @@ -39,7 +39,7 @@ static int intel_lpss_pci_probe(struct pci_dev *pdev,
>  
>  	/* Probably it is enough to set this for iDMA capable devices only */
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	ret = intel_lpss_probe(&pdev->dev, info);
>  	if (ret)
> diff --git a/drivers/net/ethernet/adaptec/starfire.c b/drivers/net/ethernet/adaptec/starfire.c
> index 555299737..1dbff34c4 100644
> --- a/drivers/net/ethernet/adaptec/starfire.c
> +++ b/drivers/net/ethernet/adaptec/starfire.c
> @@ -679,7 +679,7 @@ static int starfire_init_one(struct pci_dev *pdev,
>  	pci_set_master(pdev);
>  
>  	/* enable MWI -- it vastly improves Rx performance on sparc64 */
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  #ifdef ZEROCOPY
>  	/* Starfire can do TCP/UDP checksumming */
> diff --git a/drivers/net/ethernet/alacritech/slicoss.c b/drivers/net/ethernet/alacritech/slicoss.c
> index 696517eae..544510f57 100644
> --- a/drivers/net/ethernet/alacritech/slicoss.c
> +++ b/drivers/net/ethernet/alacritech/slicoss.c
> @@ -1749,7 +1749,7 @@ static int slic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>  	}
>  
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	slic_configure_pci(pdev);
>  
> diff --git a/drivers/net/ethernet/dec/tulip/tulip_core.c b/drivers/net/ethernet/dec/tulip/tulip_core.c
> index c1dcd6ca1..4f6debb24 100644
> --- a/drivers/net/ethernet/dec/tulip/tulip_core.c
> +++ b/drivers/net/ethernet/dec/tulip/tulip_core.c
> @@ -1193,10 +1193,7 @@ static void tulip_mwi_config(struct pci_dev *pdev, struct net_device *dev)
>  	/* if we have any cache line size at all, we can do MRM and MWI */
>  	csr0 |= MRM | MWI;
>  
> -	/* Enable MWI in the standard PCI command bit.
> -	 * Check for the case where MWI is desired but not available
> -	 */
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	/* read result from hardware (in case bit refused to enable) */
>  	pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
> diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c
> index 9ff894ba8..9a95ec989 100644
> --- a/drivers/net/ethernet/sun/cassini.c
> +++ b/drivers/net/ethernet/sun/cassini.c
> @@ -4933,14 +4933,14 @@ static int cas_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>  	pci_cmd &= ~PCI_COMMAND_SERR;
>  	pci_cmd |= PCI_COMMAND_PARITY;
>  	pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
> -	if (pci_try_set_mwi(pdev))
> +	if (pci_set_mwi(pdev))
>  		pr_warn("Could not enable MWI for %s\n", pci_name(pdev));
>  
>  	cas_program_bridge(pdev);
>  
>  	/*
>  	 * On some architectures, the default cache line size set
> -	 * by pci_try_set_mwi reduces perforamnce.  We have to increase
> +	 * by pci_set_mwi reduces performance.  We have to increase
>  	 * it for this case.  To start, we'll print some configuration
>  	 * data.
>  	 */
> diff --git a/drivers/net/wireless/intersil/p54/p54pci.c b/drivers/net/wireless/intersil/p54/p54pci.c
> index e97ee547b..c76326d1e 100644
> --- a/drivers/net/wireless/intersil/p54/p54pci.c
> +++ b/drivers/net/wireless/intersil/p54/p54pci.c
> @@ -583,7 +583,7 @@ static int p54p_probe(struct pci_dev *pdev,
>  	}
>  
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	pci_write_config_byte(pdev, 0x40, 0);
>  	pci_write_config_byte(pdev, 0x41, 0);
> diff --git a/drivers/net/wireless/intersil/prism54/islpci_hotplug.c b/drivers/net/wireless/intersil/prism54/islpci_hotplug.c
> index 31a1e6132..e8087d9a5 100644
> --- a/drivers/net/wireless/intersil/prism54/islpci_hotplug.c
> +++ b/drivers/net/wireless/intersil/prism54/islpci_hotplug.c
> @@ -153,8 +153,7 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  	DEBUG(SHOW_TRACING, "%s: pci_set_master(pdev)\n", DRV_NAME);
>  	pci_set_master(pdev);
>  
> -	/* enable MWI */
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	/* setup the network device interface and its structure */
>  	if (!(ndev = islpci_setup(pdev))) {
> diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
> index 2477e18c7..b259b0b58 100644
> --- a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
> +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
> @@ -1871,7 +1871,7 @@ static int rtl8180_probe(struct pci_dev *pdev,
>  
>  	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
>  		priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
> -		pci_try_set_mwi(pdev);
> +		pci_set_mwi(pdev);
>  	}
>  
>  	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 9a5500287..f0ab432d2 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -4389,25 +4389,6 @@ int pcim_set_mwi(struct pci_dev *dev)
>  }
>  EXPORT_SYMBOL(pcim_set_mwi);
>  
> -/**
> - * pci_try_set_mwi - enables memory-write-invalidate PCI transaction
> - * @dev: the PCI device for which MWI is enabled
> - *
> - * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
> - * Callers are not required to check the return value.
> - *
> - * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
> - */
> -int pci_try_set_mwi(struct pci_dev *dev)
> -{
> -#ifdef PCI_DISABLE_MWI
> -	return 0;
> -#else
> -	return pci_set_mwi(dev);
> -#endif
> -}
> -EXPORT_SYMBOL(pci_try_set_mwi);
> -
>  /**
>   * pci_clear_mwi - disables Memory-Write-Invalidate for device dev
>   * @dev: the PCI device to disable
> diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
> index b4718a1b2..d869485e2 100644
> --- a/drivers/scsi/3w-9xxx.c
> +++ b/drivers/scsi/3w-9xxx.c
> @@ -2018,7 +2018,7 @@ static int twa_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
>  	}
>  
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
>  	if (retval)
> @@ -2227,7 +2227,7 @@ static int __maybe_unused twa_resume(struct device *dev)
>  
>  	printk(KERN_WARNING "3w-9xxx: Resuming host %d.\n", tw_dev->host->host_no);
>  
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
>  	if (retval)
> diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c
> index b8f1848ec..49ca153b8 100644
> --- a/drivers/scsi/3w-sas.c
> +++ b/drivers/scsi/3w-sas.c
> @@ -1571,7 +1571,7 @@ static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
>  	}
>  
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
>  	if (retval)
> @@ -1790,7 +1790,7 @@ static int __maybe_unused twl_resume(struct device *dev)
>  	TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
>  
>  	printk(KERN_WARNING "3w-sas: Resuming host %d.\n", tw_dev->host->host_no);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
>  	if (retval)
> diff --git a/drivers/scsi/csiostor/csio_init.c b/drivers/scsi/csiostor/csio_init.c
> index 390b07bf9..c20bf44c6 100644
> --- a/drivers/scsi/csiostor/csio_init.c
> +++ b/drivers/scsi/csiostor/csio_init.c
> @@ -201,7 +201,7 @@ csio_pci_init(struct pci_dev *pdev, int *bars)
>  		goto err_disable_device;
>  
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	rv = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
>  	if (rv)
> diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
> index ac67f420e..b4833c0f8 100644
> --- a/drivers/scsi/lpfc/lpfc_init.c
> +++ b/drivers/scsi/lpfc/lpfc_init.c
> @@ -6119,7 +6119,7 @@ lpfc_enable_pci_dev(struct lpfc_hba *phba)
>  		goto out_disable_device;
>  	/* Set up device as PCI master and save state for EEH */
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  	pci_save_state(pdev);
>  
>  	/* PCIe EEH recovery on powerpc platforms needs fundamental reset */
> diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
> index 5626e9b69..76019dc2e 100644
> --- a/drivers/scsi/qla2xxx/qla_init.c
> +++ b/drivers/scsi/qla2xxx/qla_init.c
> @@ -2356,7 +2356,7 @@ qla2100_pci_config(scsi_qla_host_t *vha)
>  	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
>  
>  	pci_set_master(ha->pdev);
> -	pci_try_set_mwi(ha->pdev);
> +	pci_set_mwi(ha->pdev);
>  
>  	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
>  	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
> @@ -2388,7 +2388,7 @@ qla2300_pci_config(scsi_qla_host_t *vha)
>  	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
>  
>  	pci_set_master(ha->pdev);
> -	pci_try_set_mwi(ha->pdev);
> +	pci_set_mwi(ha->pdev);
>  
>  	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
>  	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
> @@ -2469,7 +2469,7 @@ qla24xx_pci_config(scsi_qla_host_t *vha)
>  	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
>  
>  	pci_set_master(ha->pdev);
> -	pci_try_set_mwi(ha->pdev);
> +	pci_set_mwi(ha->pdev);
>  
>  	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
>  	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
> @@ -2511,7 +2511,7 @@ qla25xx_pci_config(scsi_qla_host_t *vha)
>  	struct qla_hw_data *ha = vha->hw;
>  
>  	pci_set_master(ha->pdev);
> -	pci_try_set_mwi(ha->pdev);
> +	pci_set_mwi(ha->pdev);
>  
>  	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
>  	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
> diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
> index ca7306685..e9763d8e3 100644
> --- a/drivers/scsi/qla2xxx/qla_mr.c
> +++ b/drivers/scsi/qla2xxx/qla_mr.c
> @@ -499,7 +499,7 @@ qlafx00_pci_config(scsi_qla_host_t *vha)
>  	struct qla_hw_data *ha = vha->hw;
>  
>  	pci_set_master(ha->pdev);
> -	pci_try_set_mwi(ha->pdev);
> +	pci_set_mwi(ha->pdev);
>  
>  	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
>  	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
> diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
> index 4dee8a9e0..8acc1e5c9 100644
> --- a/drivers/tty/serial/8250/8250_lpss.c
> +++ b/drivers/tty/serial/8250/8250_lpss.c
> @@ -193,7 +193,7 @@ static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port)
>  	if (ret)
>  		return;
>  
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	/* Special DMA address for UART */
>  	dma->rx_dma_addr = 0xfffff000;
> diff --git a/drivers/usb/chipidea/ci_hdrc_pci.c b/drivers/usb/chipidea/ci_hdrc_pci.c
> index d63479e1a..d412fa910 100644
> --- a/drivers/usb/chipidea/ci_hdrc_pci.c
> +++ b/drivers/usb/chipidea/ci_hdrc_pci.c
> @@ -78,7 +78,7 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev,
>  	}
>  
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	/* register a nop PHY */
>  	ci->phy = usb_phy_generic_register();
> diff --git a/drivers/usb/gadget/udc/amd5536udc_pci.c b/drivers/usb/gadget/udc/amd5536udc_pci.c
> index 8d387e0e4..9630ce8d3 100644
> --- a/drivers/usb/gadget/udc/amd5536udc_pci.c
> +++ b/drivers/usb/gadget/udc/amd5536udc_pci.c
> @@ -151,7 +151,7 @@ static int udc_pci_probe(
>  	dev->chiprev = pdev->revision;
>  
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	/* init dma pools */
>  	if (use_dma) {
> diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
> index fc9f99fe7..e15520698 100644
> --- a/drivers/usb/gadget/udc/net2280.c
> +++ b/drivers/usb/gadget/udc/net2280.c
> @@ -3761,7 +3761,7 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  			&dev->pci->pcimstctl);
>  	/* erratum 0115 shouldn't appear: Linux inits PCI_LATENCY_TIMER */
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	/* ... also flushes any posted pci writes */
>  	dev->chiprev = get_idx_reg(dev->regs, REG_CHIPREV) & 0xffff;
> diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
> index a3c1fc924..4a0484a0c 100644
> --- a/drivers/usb/gadget/udc/pch_udc.c
> +++ b/drivers/usb/gadget/udc/pch_udc.c
> @@ -3100,7 +3100,7 @@ static int pch_udc_probe(struct pci_dev *pdev,
>  	}
>  
>  	pci_set_master(pdev);
> -	pci_try_set_mwi(pdev);
> +	pci_set_mwi(pdev);
>  
>  	/* device struct setup */
>  	spin_lock_init(&dev->lock);
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index de75f6a4d..c590f616d 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1191,9 +1191,8 @@ void pci_clear_master(struct pci_dev *dev);
>  
>  int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state);
>  int pci_set_cacheline_size(struct pci_dev *dev);
> -int __must_check pci_set_mwi(struct pci_dev *dev);
> -int __must_check pcim_set_mwi(struct pci_dev *dev);
> -int pci_try_set_mwi(struct pci_dev *dev);
> +int pci_set_mwi(struct pci_dev *dev);
> +int pcim_set_mwi(struct pci_dev *dev);
>  void pci_clear_mwi(struct pci_dev *dev);
>  void pci_intx(struct pci_dev *dev, int enable);
>  bool pci_check_and_mask_intx(struct pci_dev *dev);
> -- 
> 2.29.2
> 

  parent reply	other threads:[~2021-03-26 21:27 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-09  8:31 Heiner Kallweit
2020-12-09  8:40 ` Kalle Valo
2020-12-09  9:03 ` Vinod Koul
2020-12-09  9:20 ` Peter Chen
2020-12-09  9:22 ` Lee Jones
2020-12-09 10:59 ` Andy Shevchenko
2020-12-09 11:02   ` Andy Shevchenko
2021-03-26 21:26 ` Bjorn Helgaas [this message]
2021-03-26 21:42   ` Andy Shevchenko
2021-03-26 21:55     ` Bjorn Helgaas
2021-03-27 23:04   ` Heiner Kallweit
2021-03-28 19:58     ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210326212655.GA912670@bjorn-Precision-5520 \
    --to=helgaas@kernel.org \
    --cc=GR-QLogic-Storage-Upstream@marvell.com \
    --cc=LinoSanfilippo@gmx.de \
    --cc=Peter.Chen@nxp.com \
    --cc=akpm@linux-foundation.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=aradford@gmail.com \
    --cc=axboe@kernel.dk \
    --cc=balbi@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=chunkeey@googlemail.com \
    --cc=corbet@lwn.net \
    --cc=dan.j.williams@intel.com \
    --cc=davem@davemloft.net \
    --cc=dick.kennedy@broadcom.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hkallweit1@gmail.com \
    --cc=ionut@badula.org \
    --cc=james.smart@broadcom.com \
    --cc=jejb@linux.ibm.com \
    --cc=jirislaby@kernel.org \
    --cc=kuba@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-parisc@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=mcgrof@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=njavali@marvell.com \
    --cc=rdunlap@infradead.org \
    --cc=vireshk@kernel.org \
    --cc=vkoul@kernel.org \
    --subject='Re: [PATCH] PCI: Remove pci_try_set_mwi' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).