linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/4 v2] IXP4xx PCI rework
@ 2021-05-07 10:30 Linus Walleij
  2021-05-07 10:30 ` [PATCH 1/4 v2] ARM/ixp4xx: Move the virtual IObases Linus Walleij
                   ` (3 more replies)
  0 siblings, 4 replies; 6+ messages in thread
From: Linus Walleij @ 2021-05-07 10:30 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: linux-pci, Arnd Bergmann, Imre Kaloz, Krzysztof Halasa,
	Zoltan HERPAI, Raylynn Knight, Linus Walleij

This series reworks the IXP4xx PCI driver. The plan is the
following:

- Implement a new proper host controller that is just used
  when booting IXP4xx from device tree. (This patch series.)
- Delete all boardfiles.
- Delete the old PCI driver in arch/arm/mach-ixp4xx.
- Only device tree and proper PCI driver remains.

Changes from v1->v2:
- Address Arnds comments
- Address build errors

Linus Walleij (4):
  ARM/ixp4xx: Move the virtual IObases
  ARM/ixp4xx: Make NEED_MACH_IO_H optional
  PCI: ixp4xx: Add device tree bindings for IXP4xx
  PCI: ixp4xx: Add a new driver for IXP4xx

 .../bindings/pci/intel,ixp4xx-pci.yaml        | 102 +++
 MAINTAINERS                                   |   6 +
 arch/arm/Kconfig                              |   3 +-
 arch/arm/Kconfig.debug                        |   4 +-
 arch/arm/mach-ixp4xx/Kconfig                  |  33 +-
 arch/arm/mach-ixp4xx/common.c                 |   1 -
 arch/arm/mach-ixp4xx/fsg-setup.c              |   1 +
 .../mach-ixp4xx/include/mach/ixp4xx-regs.h    |   7 +-
 arch/arm/mach-ixp4xx/ixp4xx-of.c              |   8 +-
 arch/arm/mach-ixp4xx/nas100d-setup.c          |   1 +
 arch/arm/mach-ixp4xx/nslu2-setup.c            |   1 +
 drivers/ata/pata_ixp4xx_cf.c                  |   1 +
 drivers/net/ethernet/xscale/ixp4xx_eth.c      |   1 +
 drivers/pci/controller/Kconfig                |   8 +
 drivers/pci/controller/Makefile               |   1 +
 drivers/pci/controller/pci-ixp4xx.c           | 706 ++++++++++++++++++
 drivers/soc/ixp4xx/ixp4xx-npe.c               |   2 +
 drivers/soc/ixp4xx/ixp4xx-qmgr.c              |   2 +
 18 files changed, 867 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
 create mode 100644 drivers/pci/controller/pci-ixp4xx.c

-- 
2.30.2


^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH 1/4 v2] ARM/ixp4xx: Move the virtual IObases
  2021-05-07 10:30 [PATCH 0/4 v2] IXP4xx PCI rework Linus Walleij
@ 2021-05-07 10:30 ` Linus Walleij
  2021-05-07 10:30 ` [PATCH 2/4 v2] ARM/ixp4xx: Make NEED_MACH_IO_H optional Linus Walleij
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2021-05-07 10:30 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: linux-pci, Arnd Bergmann, Imre Kaloz, Krzysztof Halasa,
	Zoltan HERPAI, Raylynn Knight, Linus Walleij

UART1, UART2 and the expansion bus config registers
are the only registers mapped in a fixed location
when using device tree.

For device tree we also want to get rid of the custom
<mach/io.h> for IXP4xx. So we need to undefine
CONFIG_NEED_MACH_IO_H. Doing that activates the fixed
mapping of the PCI IO space to PCI_IO_VIRT_BASE which
is hardcoded to 0xFEE00000 and this would collide with
the old fixed mappings.

Move the fixed virtual IO base address from 0xFEF00000
to 0xFEC00000 in order to avoid the collision.

For the OF-only boot path let's even cut the reliance
on <mach/io.h> and just hardcode the one single virtbase
we need apart from the UART, which is hardcoded in
Kconfig.debug.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Instead of handling the UART and expansion ports
  separately just move all peripherals from 0xfef00000
  to 0xfec00000.
- Stay out of the fixmap area, that area has special
  uses.

PCI maintainers: this patch is mostly FYI, will be
merged through ARM SoC
---
 arch/arm/Kconfig.debug                          | 4 ++--
 arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h | 7 ++++---
 arch/arm/mach-ixp4xx/ixp4xx-of.c                | 8 ++++++--
 3 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9e0b5e7f12af..f672b23301e6 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1803,8 +1803,8 @@ config DEBUG_UART_VIRT
 	default 0xfedc0000 if DEBUG_EP93XX
 	default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
-	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
+	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
 	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
 	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index 708d085ce39f..f375c1c005d4 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -45,21 +45,21 @@
  * it can be used with the low-level debug code.
  */
 #define IXP4XX_PERIPHERAL_BASE_PHYS	0xC8000000
-#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFEF00000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFEC00000)
 #define IXP4XX_PERIPHERAL_REGION_SIZE	0x00013000
 
 /*
  * PCI Config registers
  */
 #define IXP4XX_PCI_CFG_BASE_PHYS	0xC0000000
-#define IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFEF13000)
+#define IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFEC13000)
 #define IXP4XX_PCI_CFG_REGION_SIZE	0x00001000
 
 /*
  * Expansion BUS Configuration registers
  */
 #define IXP4XX_EXP_CFG_BASE_PHYS	0xC4000000
-#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEF14000
+#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEC14000
 #define IXP4XX_EXP_CFG_REGION_SIZE	0x00001000
 
 #define IXP4XX_EXP_CS0_OFFSET	0x00
@@ -120,6 +120,7 @@
 #define IXP4XX_SSP_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
 
 
+/* The UART is explicitly put in the beginning of fixmap */
 #define IXP4XX_UART1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
 #define IXP4XX_UART2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
 #define IXP4XX_PMU_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c
index 7449b8319c8a..f9904716ec7f 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx-of.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c
@@ -9,8 +9,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/hardware.h>
-#include <mach/ixp4xx-regs.h>
+/*
+ * These are the only fixed phys to virt mappings we ever need
+ * we put it right after the UART mapping at 0xffc80000-0xffc81fff
+ */
+#define IXP4XX_EXP_CFG_BASE_PHYS	0xC4000000
+#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEC14000
 
 static struct map_desc ixp4xx_of_io_desc[] __initdata = {
 	/*
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH 2/4 v2] ARM/ixp4xx: Make NEED_MACH_IO_H optional
  2021-05-07 10:30 [PATCH 0/4 v2] IXP4xx PCI rework Linus Walleij
  2021-05-07 10:30 ` [PATCH 1/4 v2] ARM/ixp4xx: Move the virtual IObases Linus Walleij
@ 2021-05-07 10:30 ` Linus Walleij
  2021-05-07 10:30 ` [PATCH 3/4 v2] PCI: ixp4xx: Add device tree bindings for IXP4xx Linus Walleij
  2021-05-07 10:30 ` [PATCH 4/4 v2] PCI: ixp4xx: Add a new driver " Linus Walleij
  3 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2021-05-07 10:30 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: linux-pci, Arnd Bergmann, Imre Kaloz, Krzysztof Halasa,
	Zoltan HERPAI, Raylynn Knight, Linus Walleij

In order to create a proper PCI driver for the IXP4xx
we need to make the old PCI driver and its reliance
on <mach/io.h> optional.

Create a new Kconfig symbol for the legacy PCI driver
IXP4XX_PCI_LEGACY and only activate NEED_MACH_IO_H
for this driver.

A few files need to be adjusted to explicitly include
the <mach/hardware.h> and <mach/cpu.h> headers that
they previously obtained implicitly using <linux/io.h>
that would include <mach/io.h> and in turn include
these two headers.

This breaks our reliance on the old PCI and indirect
PCI support so we can reimplement a proper purely
DT-based driver in the PCI subsystem.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
PCI maintainers: this patch is mostly FYI, will be
merged through ARM SoC
---
 arch/arm/Kconfig                         |  3 ++-
 arch/arm/mach-ixp4xx/Kconfig             | 33 +++++++++++++++---------
 arch/arm/mach-ixp4xx/common.c            |  1 -
 arch/arm/mach-ixp4xx/fsg-setup.c         |  1 +
 arch/arm/mach-ixp4xx/nas100d-setup.c     |  1 +
 arch/arm/mach-ixp4xx/nslu2-setup.c       |  1 +
 drivers/ata/pata_ixp4xx_cf.c             |  1 +
 drivers/net/ethernet/xscale/ixp4xx_eth.c |  1 +
 drivers/soc/ixp4xx/ixp4xx-npe.c          |  2 ++
 drivers/soc/ixp4xx/ixp4xx-qmgr.c         |  2 ++
 10 files changed, 32 insertions(+), 14 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 853aab5ab327..4ca2ab19d265 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -394,7 +394,8 @@ config ARCH_IXP4XX
 	select HAVE_PCI
 	select IXP4XX_IRQ
 	select IXP4XX_TIMER
-	select NEED_MACH_IO_H
+	# With the new PCI driver this is not needed
+	select NEED_MACH_IO_H if PCI_IXP4XX_LEGACY
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	help
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 165c184801e1..cabb37232704 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -20,7 +20,7 @@ config MACH_IXP4XX_OF
 config MACH_NSLU2
 	bool
 	prompt "Linksys NSLU2"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Linksys's
 	  NSLU2 NAS device. For more information on this platform,
@@ -28,7 +28,7 @@ config MACH_NSLU2
 
 config MACH_AVILA
 	bool "Avila"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the Gateworks
 	  Avila Network Platform. For more information on this platform,
@@ -44,7 +44,7 @@ config MACH_LOFT
 
 config ARCH_ADI_COYOTE
 	bool "Coyote"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the ADI 
 	  Engineering Coyote Gateway Reference Platform. For more
@@ -52,7 +52,7 @@ config ARCH_ADI_COYOTE
 
 config MACH_GATEWAY7001
 	bool "Gateway 7001"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Gateway's
 	  7001 Access Point. For more information on this platform,
@@ -60,7 +60,7 @@ config MACH_GATEWAY7001
 
 config MACH_WG302V2
 	bool "Netgear WG302 v2 / WAG302 v2"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Netgear's
 	  WG302 v2 or WAG302 v2 Access Points. For more information
@@ -68,6 +68,7 @@ config MACH_WG302V2
 
 config ARCH_IXDP425
 	bool "IXDP425"
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Intel's 
 	  IXDP425 Development Platform (Also known as Richfield).  
@@ -75,6 +76,7 @@ config ARCH_IXDP425
 
 config MACH_IXDPG425
 	bool "IXDPG425"
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Intel's
 	  IXDPG425 Development Platform (Also known as Montajade).
@@ -120,7 +122,7 @@ config ARCH_PRPMC1100
 config MACH_NAS100D
 	bool
 	prompt "NAS100D"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Iomega's
 	  NAS 100d device. For more information on this platform,
@@ -129,7 +131,7 @@ config MACH_NAS100D
 config MACH_DSMG600
 	bool
 	prompt "D-Link DSM-G600 RevA"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support D-Link's
 	  DSM-G600 RevA device. For more information on this platform,
@@ -143,7 +145,7 @@ config	ARCH_IXDP4XX
 config MACH_FSG
 	bool
 	prompt "Freecom FSG-3"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Freecom's
 	  FSG-3 device. For more information on this platform,
@@ -152,7 +154,7 @@ config MACH_FSG
 config MACH_ARCOM_VULCAN
 	bool
 	prompt "Arcom/Eurotech Vulcan"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Arcom's
 	  Vulcan board.
@@ -173,7 +175,7 @@ config CPU_IXP43X
 config MACH_GTWX5715
 	bool "Gemtek WX5715 (Linksys WRV54G)"
 	depends on ARCH_IXP4XX
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 		This board is currently inside the Linksys WRV54G Gateways.
 
@@ -196,7 +198,7 @@ config MACH_DEVIXP
 
 config MACH_MICCPT
 	bool "Omicron MICCPT"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the MICCPT
 	  board from OMICRON electronics GmbH.
@@ -209,9 +211,16 @@ config MACH_MIC256
 
 comment "IXP4xx Options"
 
+config IXP4XX_PCI_LEGACY
+	bool "IXP4xx legacy PCI driver support"
+	depends on PCI
+	help
+	  Selects legacy PCI driver.
+	  Not recommended for new development.
+
 config IXP4XX_INDIRECT_PCI
 	bool "Use indirect PCI memory access"
-	depends on PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
           IXP4xx provides two methods of accessing PCI memory space:
 
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 000f672a94c9..431da1b4f6bd 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -32,7 +32,6 @@
 #include <linux/dma-map-ops.h>
 #include <mach/udc.h>
 #include <mach/hardware.h>
-#include <mach/io.h>
 #include <linux/uaccess.h>
 #include <asm/page.h>
 #include <asm/exception.h>
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 507ee3878769..844329c5610d 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -28,6 +28,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
+#include <mach/hardware.h>
 
 #include "irqs.h"
 
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 6959ad2e3aec..6133cf01cbe4 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -33,6 +33,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
+#include <mach/hardware.h>
 
 #include "irqs.h"
 
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index a428bb918703..8526a70e401b 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -31,6 +31,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
+#include <mach/hardware.h>
 
 #include "irqs.h"
 
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index d1644a8ef9fa..9929d0150141 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -18,6 +18,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <scsi/scsi_host.h>
+#include <mach/hardware.h>
 
 #define DRV_NAME	"pata_ixp4xx_cf"
 #define DRV_VERSION	"0.2"
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 0152f1e70783..88ad1639a7da 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -36,6 +36,7 @@
 #include <linux/module.h>
 #include <linux/soc/ixp4xx/npe.h>
 #include <linux/soc/ixp4xx/qmgr.h>
+#include <mach/hardware.h>
 
 #include "ixp46x_ts.h"
 
diff --git a/drivers/soc/ixp4xx/ixp4xx-npe.c b/drivers/soc/ixp4xx/ixp4xx-npe.c
index ec90b44fa0cd..0a16ac46ab59 100644
--- a/drivers/soc/ixp4xx/ixp4xx-npe.c
+++ b/drivers/soc/ixp4xx/ixp4xx-npe.c
@@ -20,6 +20,8 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/soc/ixp4xx/npe.h>
+#include <mach/hardware.h>
+#include <mach/cpu.h>
 
 #define DEBUG_MSG			0
 #define DEBUG_FW			0
diff --git a/drivers/soc/ixp4xx/ixp4xx-qmgr.c b/drivers/soc/ixp4xx/ixp4xx-qmgr.c
index 8c968382cea7..1b1631ac0438 100644
--- a/drivers/soc/ixp4xx/ixp4xx-qmgr.c
+++ b/drivers/soc/ixp4xx/ixp4xx-qmgr.c
@@ -12,6 +12,8 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/soc/ixp4xx/qmgr.h>
+#include <mach/hardware.h>
+#include <mach/cpu.h>
 
 static struct qmgr_regs __iomem *qmgr_regs;
 static int qmgr_irq_1;
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH 3/4 v2] PCI: ixp4xx: Add device tree bindings for IXP4xx
  2021-05-07 10:30 [PATCH 0/4 v2] IXP4xx PCI rework Linus Walleij
  2021-05-07 10:30 ` [PATCH 1/4 v2] ARM/ixp4xx: Move the virtual IObases Linus Walleij
  2021-05-07 10:30 ` [PATCH 2/4 v2] ARM/ixp4xx: Make NEED_MACH_IO_H optional Linus Walleij
@ 2021-05-07 10:30 ` Linus Walleij
  2021-05-07 10:35   ` Linus Walleij
  2021-05-07 10:30 ` [PATCH 4/4 v2] PCI: ixp4xx: Add a new driver " Linus Walleij
  3 siblings, 1 reply; 6+ messages in thread
From: Linus Walleij @ 2021-05-07 10:30 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: linux-pci, Arnd Bergmann, Imre Kaloz, Krzysztof Halasa,
	Zoltan HERPAI, Raylynn Knight, Linus Walleij, devicetree

This adds device tree bindings for the Intel IXP4xx
PCI controller which can be used as both host and
option.

Cc: devicetree@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Add the three controller interrupts to the binding.

PCI maintainers: mainly looking for a review and ACK (if
you care about DT bindings) the patch will be merged
through ARM SoC.
---
 .../bindings/pci/intel,ixp4xx-pci.yaml        | 102 ++++++++++++++++++
 1 file changed, 102 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml

diff --git a/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
new file mode 100644
index 000000000000..12c9be2ac118
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,ixp4xx-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx PCI controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: PCI host controller found in the Intel IXP4xx SoC series.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - intel,ixp42x-pci
+          - intel,ixp43x-pci
+    description: The two supported variants are ixp42x and ixp43x,
+      though more variants may exist.
+
+  reg:
+    items:
+      - description: IXP4xx-specific registers
+
+  interrupts:
+    items:
+      - description: Main PCI interrupt
+      - description: PCI DMA interrupt 1
+      - description: PCI DMA interrupt 2
+
+  ranges:
+    maxItems: 2
+    description: Typically one memory range of 64MB and one IO
+      space range of 64KB.
+
+  dma-ranges:
+    maxItems: 1
+    description: The DMA range tells the PCI host which addresses
+      the RAM is at. It can map only 64MB so if the RAM is bigger
+      than 64MB the DMA access has to be restricted to these
+      addresses.
+
+  "#interrupt-cells": true
+
+  interrupt-map: true
+
+  interrupt-map-mask:
+    items:
+      - const: 0xf800
+      - const: 0
+      - const: 0
+      - const: 7
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pci@c0000000 {
+      compatible = "intel,ixp43x-pci";
+      reg = <0xc0000000 0x1000>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      device_type = "pci";
+      bus-range = <0x00 0xff>;
+      status = "disabled";
+
+      ranges =
+        <0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+        <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+      dma-ranges =
+        <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0xf800 0 0 7>;
+      interrupt-map =
+        <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
+        <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
+        <0x0800 0 0 3 &gpio0 9  3>, /* INT C on slot 1 is irq 9 */
+        <0x0800 0 0 4 &gpio0 8  3>, /* INT D on slot 1 is irq 8 */
+        <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
+        <0x1000 0 0 2 &gpio0 9  3>, /* INT B on slot 2 is irq 9 */
+        <0x1000 0 0 3 &gpio0 8  3>, /* INT C on slot 2 is irq 8 */
+        <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
+        <0x1800 0 0 1 &gpio0 9  3>, /* INT A on slot 3 is irq 9 */
+        <0x1800 0 0 2 &gpio0 8  3>, /* INT B on slot 3 is irq 8 */
+        <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */
+        <0x1800 0 0 4 &gpio0 10 3>; /* INT D on slot 3 is irq 10 */
+    };
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH 4/4 v2] PCI: ixp4xx: Add a new driver for IXP4xx
  2021-05-07 10:30 [PATCH 0/4 v2] IXP4xx PCI rework Linus Walleij
                   ` (2 preceding siblings ...)
  2021-05-07 10:30 ` [PATCH 3/4 v2] PCI: ixp4xx: Add device tree bindings for IXP4xx Linus Walleij
@ 2021-05-07 10:30 ` Linus Walleij
  3 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2021-05-07 10:30 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: linux-pci, Arnd Bergmann, Imre Kaloz, Krzysztof Halasa,
	Zoltan HERPAI, Raylynn Knight, Linus Walleij

This adds a new PCI controller driver for the Intel IXP4xx
(IX425, IXP435 etc), based on the XScale microarchitecture.

This replaces the old driver in arch/arm/mach-ixp4xx/common-pci.c
which utilized the ARM-specific BIOS32 PCI framework,
and all parameterization for such things as memory and
IO space as well as interrupt swizzling is done from the
device tree.

The __raw_writel() and __raw_readl() are used for accessing
the PCI controller for the same reason that these accessors
are used in the timer, IRQ and GPIO drivers: the platform
will alter its address bus pattern based on whether the
system is booted in big- or little-endian mode. For this
reason all register on IXP4xx must always be accessed in
native (CPU) endianness.

This driver supports 64MB of PCI memory space, but not the
indirect access of 1GB that is available in the old driver.
We can address that later if and only if there are users
that need all 1GB of PCI address space.

Tested by booting the NSLU2, attaching a USB stick, mounting
and browsing the drive.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Add dependencies on ARM to Kconfig since we are regisering
  and ARM only abort handler.
- Create ixp4xx_readl() and ixp4xx_writel() static inline
  wrappers around the __raw_readl() and __raw_writel() calls
  with a big comment block explaining what is going on.
- Drop bus pointer from state container, it is only used in
  probe()
- Use pci_host_probe() and get rid of a lot of boilerplate.
- Use builtin_driver_probe() and explain why this is
  necessary with comments in the code.

PCI maintainers: looking for review or ACK to take this
driver throght ARM SoC since it is dependent on the first
patches in the series in order not to cause build
problems.
---
 MAINTAINERS                         |   6 +
 drivers/pci/controller/Kconfig      |   8 +
 drivers/pci/controller/Makefile     |   1 +
 drivers/pci/controller/pci-ixp4xx.c | 706 ++++++++++++++++++++++++++++
 4 files changed, 721 insertions(+)
 create mode 100644 drivers/pci/controller/pci-ixp4xx.c

diff --git a/MAINTAINERS b/MAINTAINERS
index d92f85ca831d..ae220d52a6d7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13692,6 +13692,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
 F:	drivers/pci/controller/dwc/*imx6*
 
+PCI DRIVER FOR INTEL IXP4XX
+M:	Linus Walleij <linus.walleij@linaro.org>
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
+F:	drivers/pci/controller/pci-ixp4xx.c
+
 PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
 M:	Jonathan Derrick <jonathan.derrick@intel.com>
 L:	linux-pci@vger.kernel.org
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 5aa8977d7b0f..b9a9a05be0e7 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -37,6 +37,14 @@ config PCI_FTPCI100
 	depends on OF
 	default ARCH_GEMINI
 
+config PCI_IXP4XX
+	bool "Intel IXP4xx PCI controller"
+	depends on ARM && OF
+	default ARCH_IXP4XX
+	help
+	  Say Y here if you want support for the PCI host controller found
+	  in the Intel IXP4xx XScale-based network processor SoC.
+
 config PCI_TEGRA
 	bool "NVIDIA Tegra PCIe controller"
 	depends on ARCH_TEGRA || COMPILE_TEST
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index e4559f2182f2..f81f3fd7a9e0 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_PCIE_CADENCE) += cadence/
 obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
+obj-$(CONFIG_PCI_IXP4XX) += pci-ixp4xx.o
 obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
 obj-$(CONFIG_PCI_HYPERV_INTERFACE) += pci-hyperv-intf.o
 obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
diff --git a/drivers/pci/controller/pci-ixp4xx.c b/drivers/pci/controller/pci-ixp4xx.c
new file mode 100644
index 000000000000..e2334f22789b
--- /dev/null
+++ b/drivers/pci/controller/pci-ixp4xx.c
@@ -0,0 +1,706 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for Intel IXP4xx PCI host controller
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on the IXP4xx arch/arm/mach-ixp4xx/common-pci.c driver
+ * Copyright (C) 2002 Intel Corporation
+ * Copyright (C) 2003 Greg Ungerer <gerg@linux-m68k.org>
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * Copyright (C) 2005 Deepak Saxena <dsaxena@plexity.net>
+ * Copyright (C) 2005 Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * TODO:
+ * - Test IO-space access
+ * - DMA support
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/bits.h>
+
+/* Register offsets */
+#define IXP4XX_PCI_NP_AD		0x00
+#define IXP4XX_PCI_NP_CBE		0x04
+#define IXP4XX_PCI_NP_WDATA		0x08
+#define IXP4XX_PCI_NP_RDATA		0x0c
+#define IXP4XX_PCI_CRP_AD_CBE		0x10
+#define IXP4XX_PCI_CRP_WDATA		0x14
+#define IXP4XX_PCI_CRP_RDATA		0x18
+#define IXP4XX_PCI_CSR			0x1c
+#define IXP4XX_PCI_ISR			0x20
+#define IXP4XX_PCI_INTEN		0x24
+#define IXP4XX_PCI_DMACTRL		0x28
+#define IXP4XX_PCI_AHBMEMBASE		0x2c
+#define IXP4XX_PCI_AHBIOBASE		0x30
+#define IXP4XX_PCI_PCIMEMBASE		0x34
+#define IXP4XX_PCI_AHBDOORBELL		0x38
+#define IXP4XX_PCI_PCIDOORBELL		0x3C
+#define IXP4XX_PCI_ATPDMA0_AHBADDR	0x40
+#define IXP4XX_PCI_ATPDMA0_PCIADDR	0x44
+#define IXP4XX_PCI_ATPDMA0_LENADDR	0x48
+#define IXP4XX_PCI_ATPDMA1_AHBADDR	0x4C
+#define IXP4XX_PCI_ATPDMA1_PCIADDR	0x50
+#define IXP4XX_PCI_ATPDMA1_LENADDR	0x54
+
+/* CSR bit definitions */
+#define IXP4XX_PCI_CSR_HOST		BIT(0)
+#define IXP4XX_PCI_CSR_ARBEN		BIT(1)
+#define IXP4XX_PCI_CSR_ADS		BIT(2)
+#define IXP4XX_PCI_CSR_PDS		BIT(3)
+#define IXP4XX_PCI_CSR_ABE		BIT(4)
+#define IXP4XX_PCI_CSR_DBT		BIT(5)
+#define IXP4XX_PCI_CSR_ASE		BIT(8)
+#define IXP4XX_PCI_CSR_IC		BIT(15)
+#define IXP4XX_PCI_CSR_PRST		BIT(16)
+
+/* ISR (Interrupt status) Register bit definitions */
+#define IXP4XX_PCI_ISR_PSE		BIT(0)
+#define IXP4XX_PCI_ISR_PFE		BIT(1)
+#define IXP4XX_PCI_ISR_PPE		BIT(2)
+#define IXP4XX_PCI_ISR_AHBE		BIT(3)
+#define IXP4XX_PCI_ISR_APDC		BIT(4)
+#define IXP4XX_PCI_ISR_PADC		BIT(5)
+#define IXP4XX_PCI_ISR_ADB		BIT(6)
+#define IXP4XX_PCI_ISR_PDB		BIT(7)
+
+/* INTEN (Interrupt Enable) Register bit definitions */
+#define IXP4XX_PCI_INTEN_PSE		BIT(0)
+#define IXP4XX_PCI_INTEN_PFE		BIT(1)
+#define IXP4XX_PCI_INTEN_PPE		BIT(2)
+#define IXP4XX_PCI_INTEN_AHBE		BIT(3)
+#define IXP4XX_PCI_INTEN_APDC		BIT(4)
+#define IXP4XX_PCI_INTEN_PADC		BIT(5)
+#define IXP4XX_PCI_INTEN_ADB		BIT(6)
+#define IXP4XX_PCI_INTEN_PDB		BIT(7)
+
+/* Shift value for byte enable on NP cmd/byte enable register */
+#define IXP4XX_PCI_NP_CBE_BESL		4
+
+/* PCI commands supported by NP access unit */
+#define NP_CMD_IOREAD			0x2
+#define NP_CMD_IOWRITE			0x3
+#define NP_CMD_CONFIGREAD		0xa
+#define NP_CMD_CONFIGWRITE		0xb
+#define NP_CMD_MEMREAD			0x6
+#define	NP_CMD_MEMWRITE			0x7
+
+/* Constants for CRP access into local config space */
+#define CRP_AD_CBE_BESL         20
+#define CRP_AD_CBE_WRITE	0x00010000
+
+/* Special PCI configuration space registers for this controller */
+#define IXP4XX_PCI_RTOTTO		0x40
+
+struct ixp4xx_pci {
+	struct device *dev;
+	void __iomem *base;
+	raw_spinlock_t lock; /* Protects bus writes */
+	bool errata_hammer;
+	bool host_mode;
+};
+
+/*
+ * The IXP4xx has a peculiar address bus that will change the
+ * byte order on SoC peripherals depending on whether the device
+ * operates in big endian or little endian mode. That means that
+ * readl() and writel() that always use little-endian access
+ * will not work for SoC peripherals such as the PCI controller
+ * when used in big endian mode. The accesses to the individual
+ * PCI devices on the other hand, are always little-endian and
+ * can use readl() and writel().
+ *
+ * For local AHB bus access we need to use __raw_[readl|writel]()
+ * to make sure that we access the SoC devices in the CPU native
+ * endianness.
+ */
+static inline u32 ixp4xx_readl(struct ixp4xx_pci *p, u32 reg)
+{
+	return __raw_readl(p->base + reg);
+}
+
+static inline void ixp4xx_writel(struct ixp4xx_pci *p, u32 reg, u32 val)
+{
+	__raw_writel(val, p->base + reg);
+}
+
+static int ixp4xx_pci_check_master_abort(struct ixp4xx_pci *p)
+{
+	u32 isr = ixp4xx_readl(p, IXP4XX_PCI_ISR);
+
+	if (isr & IXP4XX_PCI_ISR_PFE) {
+		/* Make sure the master abort bit is reset */
+		ixp4xx_writel(p, IXP4XX_PCI_ISR, IXP4XX_PCI_ISR_PFE);
+		dev_dbg(p->dev, "master abort detected\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ixp4xx_pci_read(struct ixp4xx_pci *p, u32 addr, u32 cmd, u32 *data)
+{
+	unsigned long flags;
+	int ret;
+
+	raw_spin_lock_irqsave(&p->lock, flags);
+
+	ixp4xx_writel(p, IXP4XX_PCI_NP_AD, addr);
+
+	if (p->errata_hammer) {
+		int i;
+
+		/*
+		 * PCI workaround - only works if NP PCI space reads have
+		 * no side effects. Hammer the register and read twice 8
+		 * times. last one will be good.
+		 */
+		for (i = 0; i < 8; i++) {
+			ixp4xx_writel(p, IXP4XX_PCI_NP_CBE, cmd);
+			*data = ixp4xx_readl(p, IXP4XX_PCI_NP_RDATA);
+			*data = ixp4xx_readl(p, IXP4XX_PCI_NP_RDATA);
+		}
+	} else {
+		ixp4xx_writel(p, IXP4XX_PCI_NP_CBE, cmd);
+		*data = ixp4xx_readl(p, IXP4XX_PCI_NP_RDATA);
+	}
+
+	/* Check for master abort */
+	ret = ixp4xx_pci_check_master_abort(p);
+
+	raw_spin_unlock_irqrestore(&p->lock, flags);
+	return ret;
+}
+
+static int ixp4xx_pci_write(struct ixp4xx_pci *p, u32 addr, u32 cmd, u32 data)
+{
+	unsigned long flags;
+	int ret;
+
+	raw_spin_lock_irqsave(&p->lock, flags);
+
+	ixp4xx_writel(p, IXP4XX_PCI_NP_AD, addr);
+
+	/* Set up the write */
+	ixp4xx_writel(p, IXP4XX_PCI_NP_CBE, cmd);
+
+	/* Execute the write by writing to NP_WDATA */
+	ixp4xx_writel(p, IXP4XX_PCI_NP_WDATA, data);
+
+	/* Check for master abort */
+	ret = ixp4xx_pci_check_master_abort(p);
+
+	raw_spin_unlock_irqrestore(&p->lock, flags);
+	return ret;
+}
+
+static u32 ixp4xx_config_addr(u8 bus_num, u16 devfn, int where)
+{
+	u32 addr;
+
+	if (!bus_num) {
+		/* type 0 */
+		addr = BIT(32-PCI_SLOT(devfn)) | ((PCI_FUNC(devfn)) << 8) |
+			(where & ~3);
+	} else {
+		/* type 1 */
+		addr = (bus_num << 16) | ((PCI_SLOT(devfn)) << 11) |
+			((PCI_FUNC(devfn)) << 8) | (where & ~3) | 1;
+	}
+	return addr;
+}
+
+/*
+ * CRP functions are "Controller Configuration Port" accesses
+ * initiated from within this driver itself to read/write PCI
+ * control information in the config space.
+ */
+static u32 ixp4xx_crp_byte_lane_enable_bits(u32 n, int size)
+{
+	if (size == 1)
+		return (0xf & ~BIT(n)) << CRP_AD_CBE_BESL;
+	if (size == 2)
+		return (0xf & ~(BIT(n) | BIT(n+1))) << CRP_AD_CBE_BESL;
+	if (size == 4)
+		return 0;
+	return 0xffffffff;
+}
+
+static int ixp4xx_crp_read_config(struct ixp4xx_pci *p, int where, int size,
+				  u32 *value)
+{
+	unsigned long flags;
+	u32 n, cmd, val;
+
+	n = where % 4;
+	cmd = where & ~3;
+
+	dev_dbg(p->dev, "%s from %d size %d cmd %08x\n",
+		__func__, where, size, cmd);
+
+	raw_spin_lock_irqsave(&p->lock, flags);
+	ixp4xx_writel(p, IXP4XX_PCI_CRP_AD_CBE, cmd);
+	val = ixp4xx_readl(p, IXP4XX_PCI_CRP_RDATA);
+	raw_spin_unlock_irqrestore(&p->lock, flags);
+
+	val >>= (8*n);
+	switch (size) {
+	case 1:
+		val &= U8_MAX;
+		dev_dbg(p->dev, "%s read byte %02x\n", __func__, val);
+		break;
+	case 2:
+		val &= U16_MAX;
+		dev_dbg(p->dev, "%s read word %04x\n", __func__, val);
+		break;
+	case 4:
+		val &= U32_MAX;
+		dev_dbg(p->dev, "%s read long %08x\n", __func__, val);
+		break;
+	default:
+		/* Should not happen */
+		dev_err(p->dev, "%s illegal size\n", __func__);
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+	*value = val;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int ixp4xx_crp_write_config(struct ixp4xx_pci *p, int where, int size,
+				   u32 value)
+{
+	unsigned long flags;
+	u32 n, cmd, val;
+
+	n = where % 4;
+	cmd = ixp4xx_crp_byte_lane_enable_bits(n, size);
+	if (cmd == 0xffffffff)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	cmd |= where & ~3;
+	cmd |= CRP_AD_CBE_WRITE;
+
+	val = value << (8*n);
+
+	dev_dbg(p->dev, "%s to %d size %d cmd %08x val %08x\n",
+		__func__, where, size, cmd, val);
+
+	raw_spin_lock_irqsave(&p->lock, flags);
+	ixp4xx_writel(p, IXP4XX_PCI_CRP_AD_CBE, cmd);
+	ixp4xx_writel(p, IXP4XX_PCI_CRP_WDATA, val);
+	raw_spin_unlock_irqrestore(&p->lock, flags);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * Then follows the functions that read and write from the common
+ * PCI configuration space.
+ */
+
+static u32 ixp4xx_byte_lane_enable_bits(u32 n, int size)
+{
+	if (size == 1)
+		return (0xf & ~BIT(n)) << 4;
+	if (size == 2)
+		return (0xf & ~(BIT(n) | BIT(n+1))) << 4;
+	if (size == 4)
+		return 0;
+	return 0xffffffff;
+}
+
+static int ixp4xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 *value)
+{
+	struct ixp4xx_pci *p = bus->sysdata;
+	u32 n, addr, val, cmd;
+	u8 bus_num = bus->number;
+	int ret;
+
+	*value = 0xffffffff;
+	n = where % 4;
+	cmd = ixp4xx_byte_lane_enable_bits(n, size);
+	if (cmd == 0xffffffff)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	addr = ixp4xx_config_addr(bus_num, devfn, where);
+	cmd |= NP_CMD_CONFIGREAD;
+	dev_dbg(p->dev, "read_config from %d size %d dev %d:%d:%d address: %08x cmd: %08x\n",
+		where, size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), addr, cmd);
+
+	ret = ixp4xx_pci_read(p, addr, cmd, &val);
+	if (ret)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	val >>= (8*n);
+	switch (size) {
+	case 1:
+		val &= U8_MAX;
+		dev_dbg(p->dev, "%s read byte %02x\n", __func__, val);
+		break;
+	case 2:
+		val &= U16_MAX;
+		dev_dbg(p->dev, "%s read word %04x\n", __func__, val);
+		break;
+	case 4:
+		val &= U32_MAX;
+		dev_dbg(p->dev, "%s read long %08x\n", __func__, val);
+		break;
+	default:
+		/* Should not happen */
+		dev_err(p->dev, "%s illegal size\n", __func__);
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+	*value = val;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int ixp4xx_pci_write_config(struct pci_bus *bus,  unsigned int devfn,
+				   int where, int size, u32 value)
+{
+	struct ixp4xx_pci *p = bus->sysdata;
+	u32 n, addr, val, cmd;
+	u8 bus_num = bus->number;
+	int ret;
+
+	n = where % 4;
+	cmd = ixp4xx_byte_lane_enable_bits(n, size);
+	if (cmd == 0xffffffff)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	addr = ixp4xx_config_addr(bus_num, devfn, where);
+	cmd |= NP_CMD_CONFIGWRITE;
+	val = value << (8*n);
+
+	dev_dbg(p->dev, "write_config_byte %#x to %d size %d dev %d:%d:%d addr: %08x cmd %08x\n",
+		value, where, size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), addr, cmd);
+
+	ret = ixp4xx_pci_write(p, addr, cmd, val);
+	if (ret)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops ixp4xx_pci_ops = {
+	.read = ixp4xx_pci_read_config,
+	.write = ixp4xx_pci_write_config,
+};
+
+static u32 ixp4xx_pci_addr_to_64mconf(phys_addr_t addr)
+{
+	u8 base;
+
+	base = ((addr & 0xff000000) >> 24);
+	return (base << 24) | ((base + 1) << 16)
+		| ((base + 2) << 8) | (base + 3);
+}
+
+static int ixp4xx_pci_parse_map_ranges(struct ixp4xx_pci *p)
+{
+	struct device *dev = p->dev;
+	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(p);
+	struct resource_entry *win;
+	struct resource *res;
+	phys_addr_t addr;
+
+	win = resource_list_first_type(&bridge->windows, IORESOURCE_MEM);
+	if (win) {
+		u32 pcimembase;
+
+		res = win->res;
+		addr = res->start - win->offset;
+
+		if (res->flags & IORESOURCE_PREFETCH)
+			res->name = "IXP4xx PCI PRE-MEM";
+		else
+			res->name = "IXP4xx PCI NON-PRE-MEM";
+
+		dev_dbg(dev, "%s window %pR, bus addr %pa\n",
+			res->name, res, &addr);
+		if (resource_size(res) != SZ_64M) {
+			dev_err(dev, "memory range is not 64MB\n");
+			return -EINVAL;
+		}
+
+		pcimembase = ixp4xx_pci_addr_to_64mconf(addr);
+		/* Commit configuration */
+		ixp4xx_writel(p, IXP4XX_PCI_PCIMEMBASE, pcimembase);
+	} else {
+		dev_err(dev, "no AHB memory mapping defined\n");
+	}
+
+	win = resource_list_first_type(&bridge->windows, IORESOURCE_IO);
+	if (win) {
+		res = win->res;
+
+		addr = pci_pio_to_address(res->start);
+		if (addr & 0xff) {
+			dev_err(dev, "IO mem at uneven address: %pa\n", &addr);
+			return -EINVAL;
+		}
+
+		res->name = "IXP4xx PCI IO MEM";
+		/*
+		 * Setup I/O space location for PCI->AHB access, the
+		 * upper 24 bits of the address goes into the lower
+		 * 24 bits of this register.
+		 */
+		ixp4xx_writel(p, IXP4XX_PCI_AHBIOBASE, (addr >> 8));
+	} else {
+		dev_info(dev, "no IO space AHB memory mapping defined\n");
+	}
+
+	return 0;
+}
+
+static int ixp4xx_pci_parse_map_dma_ranges(struct ixp4xx_pci *p)
+{
+	struct device *dev = p->dev;
+	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(p);
+	struct resource_entry *win;
+	struct resource *res;
+	phys_addr_t addr;
+	u32 ahbmembase;
+
+	win = resource_list_first_type(&bridge->dma_ranges, IORESOURCE_MEM);
+	if (win) {
+		res = win->res;
+		addr = res->start - win->offset;
+
+		if (resource_size(res) != SZ_64M) {
+			dev_err(dev, "DMA memory range is not 64MB\n");
+			return -EINVAL;
+		}
+
+		dev_dbg(dev, "DMA MEM BASE: %pa\n", &addr);
+		/*
+		 * 4 PCI-to-AHB windows of 16 MB each, write the 8 high bits
+		 * into each byte of the PCI_AHBMEMBASE register.
+		 */
+		ahbmembase = ixp4xx_pci_addr_to_64mconf(addr);
+		/* Commit AHB membase */
+		ixp4xx_writel(p, IXP4XX_PCI_AHBMEMBASE, ahbmembase);
+	} else {
+		dev_err(dev, "no DMA memory range defined\n");
+	}
+
+	return 0;
+}
+
+/* Only used to get context for abort handling */
+static struct ixp4xx_pci *ixp4xx_pci_abort_singleton;
+
+static int ixp4xx_pci_abort_handler(unsigned long addr, unsigned int fsr,
+				    struct pt_regs *regs)
+{
+	struct ixp4xx_pci *p = ixp4xx_pci_abort_singleton;
+	u32 isr, status;
+	int ret;
+
+	isr = ixp4xx_readl(p, IXP4XX_PCI_ISR);
+	ret = ixp4xx_crp_read_config(p, PCI_STATUS, 2, &status);
+	if (ret) {
+		dev_err(p->dev, "unable to read abort status\n");
+		return -EINVAL;
+	}
+
+	dev_err(p->dev,
+		"PCI: abort_handler addr = %#lx, isr = %#x, status = %#x\n",
+		addr, isr, status);
+
+	/* Make sure the Master Abort bit is reset */
+	ixp4xx_writel(p, IXP4XX_PCI_ISR, IXP4XX_PCI_ISR_PFE);
+	status |= PCI_STATUS_REC_MASTER_ABORT;
+	ret = ixp4xx_crp_write_config(p, PCI_STATUS, 2, status);
+	if (ret)
+		dev_err(p->dev, "unable to clear abort status bit\n");
+
+	/*
+	 * If it was an imprecise abort, then we need to correct the
+	 * return address to be _after_ the instruction.
+	 */
+	if (fsr & (1 << 10)) {
+		dev_err(p->dev, "imprecise abort\n");
+		regs->ARM_pc += 4;
+	}
+
+	return 0;
+}
+
+static int __init ixp4xx_pci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct ixp4xx_pci *p;
+	struct pci_host_bridge *host;
+	int ret;
+	u32 val;
+	phys_addr_t addr;
+	u32 basereg[4] = {
+		PCI_BASE_ADDRESS_0,
+		PCI_BASE_ADDRESS_1,
+		PCI_BASE_ADDRESS_2,
+		PCI_BASE_ADDRESS_3,
+	};
+	int i;
+
+	host = devm_pci_alloc_host_bridge(dev, sizeof(*p));
+	if (!host)
+		return -ENOMEM;
+
+	host->ops = &ixp4xx_pci_ops;
+	p = pci_host_bridge_priv(host);
+	host->sysdata = p;
+	p->dev = dev;
+	raw_spin_lock_init(&p->lock);
+	dev_set_drvdata(dev, p);
+
+	/*
+	 * Set up quirk for erratic behaviour in the 42x variant
+	 * when accessing config space.
+	 */
+	if (of_device_is_compatible(np, "intel,ixp42x-pci")) {
+		p->errata_hammer = true;
+		dev_info(dev, "activate hammering errata\n");
+	}
+
+	p->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(p->base))
+		return PTR_ERR(p->base);
+
+	val = ixp4xx_readl(p, IXP4XX_PCI_CSR);
+	p->host_mode = !!(val & IXP4XX_PCI_CSR_HOST);
+	dev_info(dev, "controller is in %s mode\n",
+		 p->host_mode ? "host" : "option");
+
+	/* Hook in our fault handler for PCI errors */
+	ixp4xx_pci_abort_singleton = p;
+	hook_fault_code(16+6, ixp4xx_pci_abort_handler, SIGBUS, 0,
+			"imprecise external abort");
+
+	ret = ixp4xx_pci_parse_map_ranges(p);
+	if (ret)
+		return ret;
+
+	ret = ixp4xx_pci_parse_map_dma_ranges(p);
+	if (ret)
+		return ret;
+
+	/* This is only configured in host mode */
+	if (p->host_mode) {
+		addr = __pa(PAGE_OFFSET);
+		/* This is a noop (0x00) but explains what is going on */
+		addr |= PCI_BASE_ADDRESS_SPACE_MEMORY;
+
+		for (i = 0; i < 4; i++) {
+			/* Write this directly into the config space */
+			ret = ixp4xx_crp_write_config(p, basereg[i], 4, addr);
+			if (ret)
+				dev_err(dev, "failed to set up PCI_BASE_ADDRESS_%d\n", i);
+			else
+				dev_info(dev, "set PCI_BASE_ADDR_%d to %pa\n", i, &addr);
+			addr += SZ_16M;
+		}
+
+		/*
+		 * Enable CSR window at 64 MiB to allow PCI masters to continue
+		 * prefetching past the 64 MiB boundary, if all AHB to PCI windows
+		 * are consecutive.
+		 */
+		ret = ixp4xx_crp_write_config(p, PCI_BASE_ADDRESS_4, 4, addr);
+		if (ret)
+			dev_err(dev, "failed to set up PCI_BASE_ADDRESS_4\n");
+		else
+			dev_info(dev, "set PCI_BASE_ADDR_4 to %pa\n", &addr);
+
+		/*
+		 * Put the IO memory at the very end of physical memory at
+		 * 0xfffffc00. This is when the PCI is trying to access IO
+		 * memory over AHB.
+		 */
+		addr = 0xfffffc00;
+		addr |= PCI_BASE_ADDRESS_SPACE_IO;
+		ret = ixp4xx_crp_write_config(p, PCI_BASE_ADDRESS_5, 4, addr);
+		if (ret)
+			dev_err(dev, "failed to set up PCI_BASE_ADDRESS_5\n");
+		else
+			dev_info(dev, "set PCI_BASE_ADDR_5 to %pa\n", &addr);
+
+		/*
+		 * Retry timeout to 0x80
+		 * Transfer ready timeout to 0xff
+		 */
+		ret = ixp4xx_crp_write_config(p, IXP4XX_PCI_RTOTTO, 4,
+					      0x000080ff);
+		if (ret)
+			dev_err(dev, "failed to set up TRDY limit\n");
+		else
+			dev_info(dev, "set TRDY limit to 0x80ff\n");
+	}
+
+	/* Clear interrupts */
+	val = IXP4XX_PCI_ISR_PSE | IXP4XX_PCI_ISR_PFE | IXP4XX_PCI_ISR_PPE | IXP4XX_PCI_ISR_AHBE;
+	ixp4xx_writel(p, IXP4XX_PCI_ISR, val);
+
+	/*
+	 * Set Initialize Complete in PCI Control Register: allow IXP4XX to
+	 * respond to PCI configuration cycles. Specify that the AHB bus is
+	 * operating in big endian mode. Set up byte lane swapping between
+	 * little-endian PCI and the big-endian AHB bus.
+	 */
+	val = IXP4XX_PCI_CSR_IC | IXP4XX_PCI_CSR_ABE;
+#ifdef __ARMEB__
+	val |= (IXP4XX_PCI_CSR_PDS | IXP4XX_PCI_CSR_ADS);
+#endif
+	ixp4xx_writel(p, IXP4XX_PCI_CSR, val);
+
+	ret = ixp4xx_crp_write_config(p, PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+	if (ret)
+		dev_err(dev, "unable to initialize master and command memory\n");
+	else
+		dev_info(dev, "initialized as master\n");
+
+	pci_host_probe(host);
+
+	return 0;
+}
+
+static const struct of_device_id ixp4xx_pci_of_match[] = {
+	{
+		.compatible = "intel,ixp42x-pci",
+	},
+	{
+		.compatible = "intel,ixp43x-pci",
+	},
+	{},
+};
+
+/*
+ * This driver needs to be a builtin module with suppressed bind
+ * attributes since the probe() is initializing a hard exception
+ * handler and this can only be done from __init-tagged code
+ * sections. This module cannot be removed and inserted at all.
+ */
+static struct platform_driver ixp4xx_pci_driver = {
+	.driver = {
+		.name = "ixp4xx-pci",
+		.suppress_bind_attrs = true,
+		.of_match_table = of_match_ptr(ixp4xx_pci_of_match),
+		.suppress_bind_attrs = true,
+	},
+};
+/*
+ * This is the only way to have an __init tagged probe that does
+ * not cause link errors.
+ */
+builtin_platform_driver_probe(ixp4xx_pci_driver, ixp4xx_pci_probe);
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 6+ messages in thread
* Re: [PATCH 3/4 v2] PCI: ixp4xx: Add device tree bindings for IXP4xx
  2021-05-07 10:30 ` [PATCH 3/4 v2] PCI: ixp4xx: Add device tree bindings for IXP4xx Linus Walleij
@ 2021-05-07 10:35   ` Linus Walleij
  0 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2021-05-07 10:35 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: linux-pci, Arnd Bergmann, Imre Kaloz, Krzysztof Halasa,
	Zoltan HERPAI, Raylynn Knight,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS

On Fri, May 7, 2021 at 12:30 PM Linus Walleij <linus.walleij@linaro.org> wrote:

> This adds device tree bindings for the Intel IXP4xx
> PCI controller which can be used as both host and
> option.

Ooops I see I missed some review comments on the bindings,
ignore this v2 for the bindings and I'll fix and send a v3.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-05-07 10:36 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-07 10:30 [PATCH 0/4 v2] IXP4xx PCI rework Linus Walleij
2021-05-07 10:30 ` [PATCH 1/4 v2] ARM/ixp4xx: Move the virtual IObases Linus Walleij
2021-05-07 10:30 ` [PATCH 2/4 v2] ARM/ixp4xx: Make NEED_MACH_IO_H optional Linus Walleij
2021-05-07 10:30 ` [PATCH 3/4 v2] PCI: ixp4xx: Add device tree bindings for IXP4xx Linus Walleij
2021-05-07 10:35   ` Linus Walleij
2021-05-07 10:30 ` [PATCH 4/4 v2] PCI: ixp4xx: Add a new driver " Linus Walleij

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).