linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [v6] PCI: Add reset quirk for Huawei Intelligent NIC virtual function
@ 2021-04-14 13:23 Chiqijun
  2021-05-24 23:43 ` Bjorn Helgaas
  0 siblings, 1 reply; 2+ messages in thread
From: Chiqijun @ 2021-04-14 13:23 UTC (permalink / raw)
  To: bhelgaas
  Cc: linux-pci, linux-kernel, alex.williamson, yin.yinshi,
	cloud.wangxiaoyun, zengweiliang.zengweiliang, chenlizhong

When we do an FLR on several VFs at the same time, the Huawei
Intelligent NIC processes them serially, resulting in some VF
FLRs being delayed more than 100ms, when the virtual machine
restarts and the device driver is loaded, the firmware is doing
the corresponding VF FLR, causing the driver to fail to load.
Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr

To solve this problem, add host and firmware status synchronization
during FLR.

Signed-off-by: Chiqijun <chiqijun@huawei.com>
---
v6:
 - Addressed Bjorn's review comments

v5:
 - Fix build warning reported by kernel test robot

v4:
 - Addressed Bjorn's review comments

v3:
 - The MSE bit in the VF configuration space is hardwired to zero,
   remove the setting of PCI_COMMAND_MEMORY bit. Add comment for
   set PCI_COMMAND register.

v2:
 - Update comments
 - Use the HINIC_VF_FLR_CAP_BIT_SHIFT and HINIC_VF_FLR_PROC_BIT_SHIFT
   macro instead of the magic number
---
 drivers/pci/quirks.c | 69 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 653660e3ba9e..6677b7220442 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3913,6 +3913,73 @@ static int delay_250ms_after_flr(struct pci_dev *dev, int probe)
 	return 0;
 }
 
+#define PCI_DEVICE_ID_HINIC_VF      0x375E
+#define HINIC_VF_FLR_TYPE           0x1000
+#define HINIC_VF_FLR_CAP_BIT        (1UL << 30)
+#define HINIC_VF_OP                 0xE80
+#define HINIC_VF_FLR_PROC_BIT       (1UL << 18)
+#define HINIC_OPERATION_TIMEOUT     15000	/* 15 seconds */
+
+/* Device-specific reset method for Huawei Intelligent NIC virtual functions */
+static int reset_hinic_vf_dev(struct pci_dev *pdev, int probe)
+{
+	unsigned long timeout;
+	void __iomem *bar;
+	u32 val;
+
+	if (probe)
+		return 0;
+
+	bar = pci_iomap(pdev, 0, 0);
+	if (!bar)
+		return -ENOTTY;
+
+	/* Get and check firmware capabilities. */
+	val = ioread32be(bar + HINIC_VF_FLR_TYPE);
+	if (!(val & HINIC_VF_FLR_CAP_BIT)) {
+		pci_iounmap(pdev, bar);
+		return -ENOTTY;
+	}
+
+	/*
+	 * Set the processing bit for the start of FLR, which will be cleared
+	 * by the firmware after FLR is completed.
+	 */
+	val = ioread32be(bar + HINIC_VF_OP);
+	val = val | HINIC_VF_FLR_PROC_BIT;
+	iowrite32be(val, bar + HINIC_VF_OP);
+
+	/* Perform the actual device function reset */
+	pcie_flr(pdev);
+
+	/*
+	 * The device must learn BDF after FLR in order to respond to BAR's
+	 * read request, therefore, we issue a configure write request to let
+	 * the device capture BDF.
+	 */
+	pci_write_config_word(pdev, PCI_VENDOR_ID, 0);
+
+	/* Waiting for device reset complete */
+	timeout = jiffies + msecs_to_jiffies(HINIC_OPERATION_TIMEOUT);
+	do {
+		val = ioread32be(bar + HINIC_VF_OP);
+		if (!(val & HINIC_VF_FLR_PROC_BIT))
+			goto reset_complete;
+		msleep(20);
+	} while (time_before(jiffies, timeout));
+
+	val = ioread32be(bar + HINIC_VF_OP);
+	if (!(val & HINIC_VF_FLR_PROC_BIT))
+		goto reset_complete;
+
+	pci_warn(pdev, "Reset dev timeout, FLR ack reg: %#010x\n", val);
+
+reset_complete:
+	pci_iounmap(pdev, bar);
+
+	return 0;
+}
+
 static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
 		 reset_intel_82599_sfp_virtfn },
@@ -3924,6 +3991,8 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
 	{ PCI_VENDOR_ID_INTEL, 0x0953, delay_250ms_after_flr },
 	{ PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
 		reset_chelsio_generic_dev },
+	{ PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_HINIC_VF,
+		reset_hinic_vf_dev },
 	{ 0 }
 };
 
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [v6] PCI: Add reset quirk for Huawei Intelligent NIC virtual function
  2021-04-14 13:23 [v6] PCI: Add reset quirk for Huawei Intelligent NIC virtual function Chiqijun
@ 2021-05-24 23:43 ` Bjorn Helgaas
  0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Helgaas @ 2021-05-24 23:43 UTC (permalink / raw)
  To: Chiqijun
  Cc: bhelgaas, linux-pci, linux-kernel, alex.williamson, yin.yinshi,
	cloud.wangxiaoyun, zengweiliang.zengweiliang, chenlizhong

On Wed, Apr 14, 2021 at 09:23:01PM +0800, Chiqijun wrote:
> When we do an FLR on several VFs at the same time, the Huawei
> Intelligent NIC processes them serially, resulting in some VF
> FLRs being delayed more than 100ms, when the virtual machine
> restarts and the device driver is loaded, the firmware is doing
> the corresponding VF FLR, causing the driver to fail to load.
> Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr
> 
> To solve this problem, add host and firmware status synchronization
> during FLR.
> 
> Signed-off-by: Chiqijun <chiqijun@huawei.com>

Applied to pci/reset for v5.14 with subject
"PCI: Work around Huawei Intelligent NIC VF FLR erratum" and the
following commit log:

  pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum
  time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the
  FLR to complete.  It assumes the FLR is complete when a config read returns
  valid data.

  When we do an FLR on several Huawei Intelligent NIC VFs at the same time,
  firmware on the NIC processes them serially.  The VF may respond to config
  reads before the firmware has completed its reset processing.  If we bind a
  driver to the VF (e.g., by assigning the VF to a virtual machine) in the
  interval between the successful config read and completion of the firmware
  reset processing, the NIC VF driver may fail to load.

  Prevent this driver failure by waiting for the NIC firmware to complete its
  reset processing.  Not all NIC firmware supports this feature.

Let me know if that's not accurate.

I applied Alex's Reviewed-by (from v3) because the patch is basically
identical except for cosmetic changes.

> ---
> v6:
>  - Addressed Bjorn's review comments
> 
> v5:
>  - Fix build warning reported by kernel test robot
> 
> v4:
>  - Addressed Bjorn's review comments
> 
> v3:
>  - The MSE bit in the VF configuration space is hardwired to zero,
>    remove the setting of PCI_COMMAND_MEMORY bit. Add comment for
>    set PCI_COMMAND register.
> 
> v2:
>  - Update comments
>  - Use the HINIC_VF_FLR_CAP_BIT_SHIFT and HINIC_VF_FLR_PROC_BIT_SHIFT
>    macro instead of the magic number
> ---
>  drivers/pci/quirks.c | 69 ++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 69 insertions(+)
> 
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 653660e3ba9e..6677b7220442 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -3913,6 +3913,73 @@ static int delay_250ms_after_flr(struct pci_dev *dev, int probe)
>  	return 0;
>  }
>  
> +#define PCI_DEVICE_ID_HINIC_VF      0x375E
> +#define HINIC_VF_FLR_TYPE           0x1000
> +#define HINIC_VF_FLR_CAP_BIT        (1UL << 30)
> +#define HINIC_VF_OP                 0xE80
> +#define HINIC_VF_FLR_PROC_BIT       (1UL << 18)
> +#define HINIC_OPERATION_TIMEOUT     15000	/* 15 seconds */
> +
> +/* Device-specific reset method for Huawei Intelligent NIC virtual functions */
> +static int reset_hinic_vf_dev(struct pci_dev *pdev, int probe)
> +{
> +	unsigned long timeout;
> +	void __iomem *bar;
> +	u32 val;
> +
> +	if (probe)
> +		return 0;
> +
> +	bar = pci_iomap(pdev, 0, 0);
> +	if (!bar)
> +		return -ENOTTY;
> +
> +	/* Get and check firmware capabilities. */
> +	val = ioread32be(bar + HINIC_VF_FLR_TYPE);
> +	if (!(val & HINIC_VF_FLR_CAP_BIT)) {
> +		pci_iounmap(pdev, bar);
> +		return -ENOTTY;
> +	}
> +
> +	/*
> +	 * Set the processing bit for the start of FLR, which will be cleared
> +	 * by the firmware after FLR is completed.
> +	 */
> +	val = ioread32be(bar + HINIC_VF_OP);
> +	val = val | HINIC_VF_FLR_PROC_BIT;
> +	iowrite32be(val, bar + HINIC_VF_OP);
> +
> +	/* Perform the actual device function reset */
> +	pcie_flr(pdev);
> +
> +	/*
> +	 * The device must learn BDF after FLR in order to respond to BAR's
> +	 * read request, therefore, we issue a configure write request to let
> +	 * the device capture BDF.
> +	 */
> +	pci_write_config_word(pdev, PCI_VENDOR_ID, 0);
> +
> +	/* Waiting for device reset complete */
> +	timeout = jiffies + msecs_to_jiffies(HINIC_OPERATION_TIMEOUT);
> +	do {
> +		val = ioread32be(bar + HINIC_VF_OP);
> +		if (!(val & HINIC_VF_FLR_PROC_BIT))
> +			goto reset_complete;
> +		msleep(20);
> +	} while (time_before(jiffies, timeout));
> +
> +	val = ioread32be(bar + HINIC_VF_OP);
> +	if (!(val & HINIC_VF_FLR_PROC_BIT))
> +		goto reset_complete;
> +
> +	pci_warn(pdev, "Reset dev timeout, FLR ack reg: %#010x\n", val);
> +
> +reset_complete:
> +	pci_iounmap(pdev, bar);
> +
> +	return 0;
> +}
> +
>  static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
>  	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
>  		 reset_intel_82599_sfp_virtfn },
> @@ -3924,6 +3991,8 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
>  	{ PCI_VENDOR_ID_INTEL, 0x0953, delay_250ms_after_flr },
>  	{ PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
>  		reset_chelsio_generic_dev },
> +	{ PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_HINIC_VF,
> +		reset_hinic_vf_dev },
>  	{ 0 }
>  };
>  
> -- 
> 2.17.1
> 

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-05-24 23:43 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-14 13:23 [v6] PCI: Add reset quirk for Huawei Intelligent NIC virtual function Chiqijun
2021-05-24 23:43 ` Bjorn Helgaas

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).