Re: [PATCH v4 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280

Re: [PATCH v4 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280

[Bjorn Helgaas]

[+cc linux-pci]

On Fri, Jul 16, 2021 at 07:28:43PM +0530, Prasad Malisetty wrote:
> Changes in v4 as suggested by Bjorn:
> 
> 	* Changed pipe clk mux name as gcc_pcie_1_pipe_clk_src.
> 	* Changed pipe_ext_src as phy_pipe_clk.
> 	* Updated commit message for [PATCH v4 4/4]. 
> 		
> 
> Changes in v3:
> 	* Changed pipe clock names in dt bindings as pipe_mux and phy_pipe.
> 	* Moved reset and NVMe GPIO pin configs into board specific file.
> 	* Updated pipe clk mux commit message.
> 	
> Changes in v2:
> 	* Moved pcie pin control settings into IDP file.
> 	* Replaced pipe_clk_src with pipe_clk_mux in pcie driver 
> 	* Included pipe clk mux setting change set in this series
> 
> Prasad Malisetty (4):
>   dt-bindings: pci: qcom: Document PCIe bindings for SC720
>   arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
>   arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board
>   PCIe: qcom: Add support to control pipe clk src
> 
>  .../devicetree/bindings/pci/qcom,pcie.txt          |  17 +++
>  arch/arm64/boot/dts/qcom/sc7280-idp.dts            |  38 +++++++
>  arch/arm64/boot/dts/qcom/sc7280.dtsi               | 125 +++++++++++++++++++++
>  drivers/pci/controller/dwc/pcie-qcom.c             |  22 ++++

  $ ./scripts/get_maintainer.pl -f drivers/pci/controller/dwc/pcie-qcom.c

tells you that linux-pci should be included.  One reason that's
important is because patchwork watches linux-pci for incoming patches,
and I use patchwork as my to-do list.