[PATCH 2/2] PCI: dra7xx: Fix clk disabling in some error paths

[Luca Ceresoli <luca@lucaceresoli.net>]

dra7xx->clk is not disabled+unprepared in some one the error paths,
specifically devm_phy_get() fails.

Fix by moving the clk_prepare_enable() stanza after all the devm_*()
resource grabbing but before all the goto-based error management. This way
it is possible to keep the 'return err' without the need to replace it with
a new goto statement.

Fixes: 5af9405397bf ("PCI: dra7xx: Get an optional clock")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202111301803.NOwoj4Jd-lkp@intel.com/
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
---
 drivers/pci/controller/dwc/pci-dra7xx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
index 2ccc53869e13..d17cc088d07e 100644
--- a/drivers/pci/controller/dwc/pci-dra7xx.c
+++ b/drivers/pci/controller/dwc/pci-dra7xx.c
@@ -748,10 +748,6 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(dra7xx->clk),
 				     "clock request failed");
 
-	ret = clk_prepare_enable(dra7xx->clk);
-	if (ret)
-		return ret;
-
 	for (i = 0; i < phy_count; i++) {
 		snprintf(name, sizeof(name), "pcie-phy%d", i);
 		phy[i] = devm_phy_get(dev, name);
@@ -759,6 +755,10 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
 			return PTR_ERR(phy[i]);
 	}
 
+	ret = clk_prepare_enable(dra7xx->clk);
+	if (ret)
+		return ret;
+
 	for (i = 0; i < phy_count; i++) {
 		link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
 		if (!link[i]) {
-- 
2.25.1