linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: "Krzysztof Wilczyński" <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
Subject: Re: [PATCH] PCI: Correct misspelled words
Date: Fri, 7 Jan 2022 20:45:59 -0600	[thread overview]
Message-ID: <20220108024559.GA440111@bhelgaas> (raw)
In-Reply-To: <20220107225942.121484-1-kw@linux.com>

On Fri, Jan 07, 2022 at 10:59:42PM +0000, Krzysztof Wilczyński wrote:
> Fix a number misspelled words, and while at it, correct two phrases used
> to indicate a status of an operation where words used have been cleverly
> truncated and thus always trigger a spellchecking error while performing
> a static code analysis over the PCI tree.
> 
> Signed-off-by: Krzysztof Wilczyński <kw@linux.com>

Applied to pci/misc, thanks!

> ---
>  drivers/pci/controller/cadence/pcie-cadence.h | 2 +-
>  drivers/pci/controller/pcie-mediatek-gen3.c   | 2 +-
>  drivers/pci/endpoint/functions/pci-epf-ntb.c  | 2 +-
>  drivers/pci/of.c                              | 2 +-
>  drivers/pci/quirks.c                          | 4 ++--
>  5 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
> index 262421e5d917..c8a27b6290ce 100644
> --- a/drivers/pci/controller/cadence/pcie-cadence.h
> +++ b/drivers/pci/controller/cadence/pcie-cadence.h
> @@ -310,7 +310,7 @@ struct cdns_pcie {
>   *            single function at a time
>   * @vendor_id: PCI vendor ID
>   * @device_id: PCI device ID
> - * @avail_ib_bar: Satus of RP_BAR0, RP_BAR1 and	RP_NO_BAR if it's free or
> + * @avail_ib_bar: Status of RP_BAR0, RP_BAR1 and RP_NO_BAR if it's free or
>   *                available
>   * @quirk_retrain_flag: Retrain link as quirk for PCIe Gen2
>   * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk
> diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
> index 17c59b0d6978..7de82da0bd6d 100644
> --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> @@ -303,7 +303,7 @@ static int mtk_pcie_startup_port(struct mtk_pcie_port *port)
>  	writel_relaxed(val, port->base + PCIE_RST_CTRL_REG);
>  
>  	/*
> -	 * Described in PCIe CEM specification setctions 2.2 (PERST# Signal)
> +	 * Described in PCIe CEM specification sections 2.2 (PERST# Signal)
>  	 * and 2.2.1 (Initial Power-Up (G3 to S0)).
>  	 * The deassertion of PERST# should be delayed 100ms (TPVPERL)
>  	 * for the power and clock to become stable.
> diff --git a/drivers/pci/endpoint/functions/pci-epf-ntb.c b/drivers/pci/endpoint/functions/pci-epf-ntb.c
> index 5a03401f4571..9a00448c7e61 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-ntb.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-ntb.c
> @@ -1262,7 +1262,7 @@ static void epf_ntb_db_mw_bar_cleanup(struct epf_ntb *ntb,
>  }
>  
>  /**
> - * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity
> + * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capability
>   * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>   * @type: PRIMARY interface or SECONDARY interface
>   *
> diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> index 0b1237cff239..cb2e8351c2cc 100644
> --- a/drivers/pci/of.c
> +++ b/drivers/pci/of.c
> @@ -247,7 +247,7 @@ void of_pci_check_probe_only(void)
>  	else
>  		pci_clear_flags(PCI_PROBE_ONLY);
>  
> -	pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis");
> +	pr_info("PROBE_ONLY %s\n", val ? "enabled" : "disabled");
>  }
>  EXPORT_SYMBOL_GPL(of_pci_check_probe_only);
>  
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 003950c738d2..e16bde66e735 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -980,8 +980,8 @@ static void quirk_via_ioapic(struct pci_dev *dev)
>  	else
>  		tmp = 0x1f; /* all known bits (4-0) routed to external APIC */
>  
> -	pci_info(dev, "%sbling VIA external APIC routing\n",
> -	       tmp == 0 ? "Disa" : "Ena");
> +	pci_info(dev, "%s VIA external APIC routing\n",
> +	       tmp == 0 ? "Disabling" : "Enabling");
>  
>  	/* Offset 0x58: External APIC IRQ output control */
>  	pci_write_config_byte(dev, 0x58, tmp);
> -- 
> 2.34.1
> 

      reply	other threads:[~2022-01-08  2:46 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-07 22:59 [PATCH] PCI: Correct misspelled words Krzysztof Wilczyński
2022-01-08  2:45 ` Bjorn Helgaas [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220108024559.GA440111@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=kw@linux.com \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).