linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Marc Zyngier <maz@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <helgaas@kernel.org>
Cc: pali@kernel.org, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	"Marek Behún" <kabel@kernel.org>,
	stable@vger.kernel.org
Subject: [PATCH v2 11/23] PCI: aardvark: Fix setting MSI address
Date: Mon, 10 Jan 2022 02:50:06 +0100	[thread overview]
Message-ID: <20220110015018.26359-12-kabel@kernel.org> (raw)
In-Reply-To: <20220110015018.26359-1-kabel@kernel.org>

From: Pali Rohár <pali@kernel.org>

MSI address for receiving MSI interrupts needs to be correctly set before
enabling processing of MSI interrupts.

Move code for setting PCIE_MSI_ADDR_LOW_REG and PCIE_MSI_ADDR_HIGH_REG
from advk_pcie_init_msi_irq_domain() to advk_pcie_setup_hw(), before
enabling PCIE_CORE_CTRL2_MSI_ENABLE.

After this we can remove the now unused member msi_msg, which was used
only for MSI doorbell address. MSI address can be any address which cannot
be used to DMA to. So change it to the address of the main struct advk_pcie.

Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support")
---
 drivers/pci/controller/pci-aardvark.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 51fedbcb41fb..79102704d82f 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -278,7 +278,6 @@ struct advk_pcie {
 	raw_spinlock_t msi_irq_lock;
 	DECLARE_BITMAP(msi_used, MSI_IRQ_NUM);
 	struct mutex msi_used_lock;
-	u16 msi_msg;
 	int link_gen;
 	struct pci_bridge_emul bridge;
 	struct gpio_desc *reset_gpio;
@@ -473,6 +472,7 @@ static void advk_pcie_disable_ob_win(struct advk_pcie *pcie, u8 win_num)
 
 static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 {
+	phys_addr_t msi_addr;
 	u32 reg;
 	int i;
 
@@ -561,6 +561,11 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 	reg |= LANE_COUNT_1;
 	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
 
+	/* Set MSI address */
+	msi_addr = virt_to_phys(pcie);
+	advk_writel(pcie, lower_32_bits(msi_addr), PCIE_MSI_ADDR_LOW_REG);
+	advk_writel(pcie, upper_32_bits(msi_addr), PCIE_MSI_ADDR_HIGH_REG);
+
 	/* Enable MSI */
 	reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
 	reg |= PCIE_CORE_CTRL2_MSI_ENABLE;
@@ -1184,10 +1189,10 @@ static void advk_msi_irq_compose_msi_msg(struct irq_data *data,
 					 struct msi_msg *msg)
 {
 	struct advk_pcie *pcie = irq_data_get_irq_chip_data(data);
-	phys_addr_t msi_msg = virt_to_phys(&pcie->msi_msg);
+	phys_addr_t msi_addr = virt_to_phys(pcie);
 
-	msg->address_lo = lower_32_bits(msi_msg);
-	msg->address_hi = upper_32_bits(msi_msg);
+	msg->address_lo = lower_32_bits(msi_addr);
+	msg->address_hi = upper_32_bits(msi_addr);
 	msg->data = data->hwirq;
 }
 
@@ -1346,18 +1351,10 @@ static struct msi_domain_info advk_msi_domain_info = {
 static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
 {
 	struct device *dev = &pcie->pdev->dev;
-	phys_addr_t msi_msg_phys;
 
 	raw_spin_lock_init(&pcie->msi_irq_lock);
 	mutex_init(&pcie->msi_used_lock);
 
-	msi_msg_phys = virt_to_phys(&pcie->msi_msg);
-
-	advk_writel(pcie, lower_32_bits(msi_msg_phys),
-		    PCIE_MSI_ADDR_LOW_REG);
-	advk_writel(pcie, upper_32_bits(msi_msg_phys),
-		    PCIE_MSI_ADDR_HIGH_REG);
-
 	pcie->msi_inner_domain =
 		irq_domain_add_linear(NULL, MSI_IRQ_NUM,
 				      &advk_msi_domain_ops, pcie);
-- 
2.34.1


  parent reply	other threads:[~2022-01-10  1:51 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-10  1:49 [PATCH v2 00/23] PCI: aardvark controller fixes BATCH 4 Marek Behún
2022-01-10  1:49 ` [PATCH v2 01/23] PCI: aardvark: Replace custom PCIE_CORE_INT_* macros with PCI_INTERRUPT_* Marek Behún
2022-01-10 17:07   ` Bjorn Helgaas
2022-01-10  1:49 ` [PATCH v2 02/23] PCI: aardvark: Fix reading MSI interrupt number Marek Behún
2022-02-04 17:24   ` Lorenzo Pieralisi
2022-02-05 10:53     ` Marc Zyngier
2022-01-10  1:49 ` [PATCH v2 03/23] PCI: aardvark: Fix support for MSI interrupts Marek Behún
2022-01-10  1:49 ` [PATCH v2 04/23] PCI: aardvark: Rewrite IRQ code to chained IRQ handler Marek Behún
2022-01-10  1:50 ` [PATCH v2 05/23] PCI: aardvark: Check return value of generic_handle_domain_irq() when processing INTx IRQ Marek Behún
2022-01-10  1:50 ` [PATCH v2 06/23] PCI: aardvark: Make MSI irq_chip structures static driver structures Marek Behún
2022-01-10  1:50 ` [PATCH v2 07/23] PCI: aardvark: Make msi_domain_info structure a static driver structure Marek Behún
2022-01-10  1:50 ` [PATCH v2 08/23] PCI: aardvark: Use dev_fwnode() instead of of_node_to_fwnode(dev->of_node) Marek Behún
2022-01-10  1:50 ` [PATCH v2 09/23] PCI: aardvark: Refactor unmasking summary MSI interrupt Marek Behún
2022-01-10  1:50 ` [PATCH v2 10/23] PCI: aardvark: Add support for masking MSI interrupts Marek Behún
2022-01-10  1:50 ` Marek Behún [this message]
2022-02-17 17:14   ` [PATCH v2 11/23] PCI: aardvark: Fix setting MSI address Bjorn Helgaas
2022-02-18 14:43     ` Marek Behún
2022-02-23 18:13       ` Bjorn Helgaas
2022-02-24 12:59         ` Pali Rohár
2022-02-24 19:43           ` Bjorn Helgaas
2022-01-10  1:50 ` [PATCH v2 12/23] PCI: aardvark: Enable MSI-X support Marek Behún
2022-01-10  1:50 ` [PATCH v2 13/23] PCI: aardvark: Add support for ERR interrupt on emulated bridge Marek Behún
2022-01-10  1:50 ` [PATCH v2 14/23] PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit " Marek Behún
2022-01-10  1:50 ` [PATCH v2 15/23] PCI: aardvark: Optimize writing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME " Marek Behún
2022-01-10  1:50 ` [PATCH v2 16/23] PCI: aardvark: Add support for PME interrupts Marek Behún
2022-01-10  1:50 ` [PATCH v2 17/23] PCI: aardvark: Fix support for PME requester on emulated bridge Marek Behún
2022-01-10  1:50 ` [PATCH v2 18/23] PCI: aardvark: Use separate INTA interrupt for emulated root bridge Marek Behún
2022-01-10  1:50 ` [PATCH v2 19/23] PCI: aardvark: Remove irq_mask_ack callback for INTx interrupts Marek Behún
2022-01-10  1:50 ` [PATCH v2 20/23] PCI: aardvark: Don't mask irq when mapping Marek Behún
2022-01-10  1:50 ` [PATCH v2 21/23] PCI: aardvark: Drop __maybe_unused from advk_pcie_disable_phy() Marek Behún
2022-01-10  1:50 ` [PATCH v2 22/23] PCI: aardvark: Update comment about link going down after link-up Marek Behún
2022-01-10  1:50 ` [PATCH v2 23/23] PCI: aardvark: Make main irq_chip structure a static driver structure Marek Behún
2022-01-10  9:28   ` Marc Zyngier
2022-01-10 10:23     ` Marek Behún
2022-01-10 10:53     ` Pali Rohár
2022-01-10 14:44       ` Marc Zyngier
2022-01-10 15:19         ` Marek Behún
2022-02-08 10:50 ` (subset) [PATCH v2 00/23] PCI: aardvark controller fixes BATCH 4 Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220110015018.26359-12-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=helgaas@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=maz@kernel.org \
    --cc=pali@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).