linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Marc Zyngier <maz@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <helgaas@kernel.org>
Cc: pali@kernel.org, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	"Marek Behún" <kabel@kernel.org>
Subject: [PATCH v2 13/23] PCI: aardvark: Add support for ERR interrupt on emulated bridge
Date: Mon, 10 Jan 2022 02:50:08 +0100	[thread overview]
Message-ID: <20220110015018.26359-14-kabel@kernel.org> (raw)
In-Reply-To: <20220110015018.26359-1-kabel@kernel.org>

From: Pali Rohár <pali@kernel.org>

ERR interrupt is triggered when corresponding bit is unmasked in both ISR0
and PCI_EXP_DEVCTL registers. Unmasking ERR bits in PCI_EXP_DEVCTL register
is not enough. This means that currently the ERR interrupt is never
triggered.

Unmask ERR bits in ISR0 register at driver probe time. ERR interrupt is not
triggered until ERR bits are unmasked also in PCI_EXP_DEVCTL register,
which is done by AER driver. So it is safe to unconditionally unmask all
ERR bits in aardvark probe.

Aardvark HW sets PCI_ERR_ROOT_AER_IRQ to zero and when corresponding bits
in ISR0 and PCI_EXP_DEVCTL are enabled, the HW triggers a generic interrupt
on GIC. Chain this interrupt to PCIe interrupt 0 with
generic_handle_domain_irq() to allow processing of ERR interrupts.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/pci/controller/pci-aardvark.c | 35 ++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index a892f22510da..6fc6c3199954 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -99,6 +99,10 @@
 #define PCIE_MSG_PM_PME_MASK			BIT(7)
 #define PCIE_ISR0_MASK_REG			(CONTROL_BASE_ADDR + 0x44)
 #define     PCIE_ISR0_MSI_INT_PENDING		BIT(24)
+#define     PCIE_ISR0_CORR_ERR			BIT(11)
+#define     PCIE_ISR0_NFAT_ERR			BIT(12)
+#define     PCIE_ISR0_FAT_ERR			BIT(13)
+#define     PCIE_ISR0_ERR_MASK			GENMASK(13, 11)
 #define     PCIE_ISR0_INTX_ASSERT(val)		BIT(16 + (val))
 #define     PCIE_ISR0_INTX_DEASSERT(val)	BIT(20 + (val))
 #define     PCIE_ISR0_ALL_MASK			GENMASK(31, 0)
@@ -783,11 +787,15 @@ advk_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge,
 	case PCI_INTERRUPT_LINE: {
 		/*
 		 * From the whole 32bit register we support reading from HW only
-		 * one bit: PCI_BRIDGE_CTL_BUS_RESET.
+		 * two bits: PCI_BRIDGE_CTL_BUS_RESET and PCI_BRIDGE_CTL_SERR.
 		 * Other bits are retrieved only from emulated config buffer.
 		 */
 		__le32 *cfgspace = (__le32 *)&bridge->conf;
 		u32 val = le32_to_cpu(cfgspace[PCI_INTERRUPT_LINE / 4]);
+		if (advk_readl(pcie, PCIE_ISR0_MASK_REG) & PCIE_ISR0_ERR_MASK)
+			val &= ~(PCI_BRIDGE_CTL_SERR << 16);
+		else
+			val |= PCI_BRIDGE_CTL_SERR << 16;
 		if (advk_readl(pcie, PCIE_CORE_CTRL1_REG) & HOT_RESET_GEN)
 			val |= PCI_BRIDGE_CTL_BUS_RESET << 16;
 		else
@@ -817,6 +825,19 @@ advk_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
 		break;
 
 	case PCI_INTERRUPT_LINE:
+		/*
+		 * According to Figure 6-3: Pseudo Logic Diagram for Error
+		 * Message Controls in PCIe base specification, SERR# Enable bit
+		 * in Bridge Control register enable receiving of ERR_* messages
+		 */
+		if (mask & (PCI_BRIDGE_CTL_SERR << 16)) {
+			u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG);
+			if (new & (PCI_BRIDGE_CTL_SERR << 16))
+				val &= ~PCIE_ISR0_ERR_MASK;
+			else
+				val |= PCIE_ISR0_ERR_MASK;
+			advk_writel(pcie, val, PCIE_ISR0_MASK_REG);
+		}
 		if (mask & (PCI_BRIDGE_CTL_BUS_RESET << 16)) {
 			u32 val = advk_readl(pcie, PCIE_CORE_CTRL1_REG);
 			if (new & (PCI_BRIDGE_CTL_BUS_RESET << 16))
@@ -1462,6 +1483,18 @@ static void advk_pcie_handle_int(struct advk_pcie *pcie)
 	isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
 	isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
 
+	/* Process ERR interrupt */
+	if (isr0_status & PCIE_ISR0_ERR_MASK) {
+		advk_writel(pcie, PCIE_ISR0_ERR_MASK, PCIE_ISR0_REG);
+
+		/*
+		 * Aardvark HW returns zero for PCI_ERR_ROOT_AER_IRQ, so use
+		 * PCIe interrupt 0
+		 */
+		if (generic_handle_domain_irq(pcie->irq_domain, 0) == -EINVAL)
+			dev_err_ratelimited(&pcie->pdev->dev, "unhandled ERR IRQ\n");
+	}
+
 	/* Process MSI interrupts */
 	if (isr0_status & PCIE_ISR0_MSI_INT_PENDING)
 		advk_pcie_handle_msi(pcie);
-- 
2.34.1


  parent reply	other threads:[~2022-01-10  1:51 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-10  1:49 [PATCH v2 00/23] PCI: aardvark controller fixes BATCH 4 Marek Behún
2022-01-10  1:49 ` [PATCH v2 01/23] PCI: aardvark: Replace custom PCIE_CORE_INT_* macros with PCI_INTERRUPT_* Marek Behún
2022-01-10 17:07   ` Bjorn Helgaas
2022-01-10  1:49 ` [PATCH v2 02/23] PCI: aardvark: Fix reading MSI interrupt number Marek Behún
2022-02-04 17:24   ` Lorenzo Pieralisi
2022-02-05 10:53     ` Marc Zyngier
2022-01-10  1:49 ` [PATCH v2 03/23] PCI: aardvark: Fix support for MSI interrupts Marek Behún
2022-01-10  1:49 ` [PATCH v2 04/23] PCI: aardvark: Rewrite IRQ code to chained IRQ handler Marek Behún
2022-01-10  1:50 ` [PATCH v2 05/23] PCI: aardvark: Check return value of generic_handle_domain_irq() when processing INTx IRQ Marek Behún
2022-01-10  1:50 ` [PATCH v2 06/23] PCI: aardvark: Make MSI irq_chip structures static driver structures Marek Behún
2022-01-10  1:50 ` [PATCH v2 07/23] PCI: aardvark: Make msi_domain_info structure a static driver structure Marek Behún
2022-01-10  1:50 ` [PATCH v2 08/23] PCI: aardvark: Use dev_fwnode() instead of of_node_to_fwnode(dev->of_node) Marek Behún
2022-01-10  1:50 ` [PATCH v2 09/23] PCI: aardvark: Refactor unmasking summary MSI interrupt Marek Behún
2022-01-10  1:50 ` [PATCH v2 10/23] PCI: aardvark: Add support for masking MSI interrupts Marek Behún
2022-01-10  1:50 ` [PATCH v2 11/23] PCI: aardvark: Fix setting MSI address Marek Behún
2022-02-17 17:14   ` Bjorn Helgaas
2022-02-18 14:43     ` Marek Behún
2022-02-23 18:13       ` Bjorn Helgaas
2022-02-24 12:59         ` Pali Rohár
2022-02-24 19:43           ` Bjorn Helgaas
2022-01-10  1:50 ` [PATCH v2 12/23] PCI: aardvark: Enable MSI-X support Marek Behún
2022-01-10  1:50 ` Marek Behún [this message]
2022-01-10  1:50 ` [PATCH v2 14/23] PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridge Marek Behún
2022-01-10  1:50 ` [PATCH v2 15/23] PCI: aardvark: Optimize writing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME " Marek Behún
2022-01-10  1:50 ` [PATCH v2 16/23] PCI: aardvark: Add support for PME interrupts Marek Behún
2022-01-10  1:50 ` [PATCH v2 17/23] PCI: aardvark: Fix support for PME requester on emulated bridge Marek Behún
2022-01-10  1:50 ` [PATCH v2 18/23] PCI: aardvark: Use separate INTA interrupt for emulated root bridge Marek Behún
2022-01-10  1:50 ` [PATCH v2 19/23] PCI: aardvark: Remove irq_mask_ack callback for INTx interrupts Marek Behún
2022-01-10  1:50 ` [PATCH v2 20/23] PCI: aardvark: Don't mask irq when mapping Marek Behún
2022-01-10  1:50 ` [PATCH v2 21/23] PCI: aardvark: Drop __maybe_unused from advk_pcie_disable_phy() Marek Behún
2022-01-10  1:50 ` [PATCH v2 22/23] PCI: aardvark: Update comment about link going down after link-up Marek Behún
2022-01-10  1:50 ` [PATCH v2 23/23] PCI: aardvark: Make main irq_chip structure a static driver structure Marek Behún
2022-01-10  9:28   ` Marc Zyngier
2022-01-10 10:23     ` Marek Behún
2022-01-10 10:53     ` Pali Rohár
2022-01-10 14:44       ` Marc Zyngier
2022-01-10 15:19         ` Marek Behún
2022-02-08 10:50 ` (subset) [PATCH v2 00/23] PCI: aardvark controller fixes BATCH 4 Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220110015018.26359-14-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=helgaas@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=maz@kernel.org \
    --cc=pali@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).