linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Marc Zyngier <maz@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <helgaas@kernel.org>
Cc: pali@kernel.org, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	"Marek Behún" <kabel@kernel.org>
Subject: [PATCH v2 14/23] PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridge
Date: Mon, 10 Jan 2022 02:50:09 +0100	[thread overview]
Message-ID: <20220110015018.26359-15-kabel@kernel.org> (raw)
In-Reply-To: <20220110015018.26359-1-kabel@kernel.org>

From: Pali Rohár <pali@kernel.org>

The emulated bridge returns incorrect value for PCI_EXP_RTSTA register
during readout in advk_pci_bridge_emul_pcie_conf_read() function: the
correct bit is BIT(16), but we are setting BIT(23), because the code
does
  *value = (isr0 & PCIE_MSG_PM_PME_MASK) << 16
where
  PCIE_MSG_PM_PME_MASK
is
  BIT(7).

The code should probably have been something like
  *value = (!!(isr0 & PCIE_MSG_PM_PME_MASK)) << 16,
but we are better of using an if() and using the proper macro for this
bit.

Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/pci/controller/pci-aardvark.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 6fc6c3199954..8706a5f58eb5 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -876,7 +876,9 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
 	case PCI_EXP_RTSTA: {
 		u32 isr0 = advk_readl(pcie, PCIE_ISR0_REG);
 		u32 msglog = advk_readl(pcie, PCIE_MSG_LOG_REG);
-		*value = (isr0 & PCIE_MSG_PM_PME_MASK) << 16 | (msglog >> 16);
+		*value = msglog >> 16;
+		if (isr0 & PCIE_MSG_PM_PME_MASK)
+			*value |= PCI_EXP_RTSTA_PME;
 		return PCI_BRIDGE_EMUL_HANDLED;
 	}
 
-- 
2.34.1


  parent reply	other threads:[~2022-01-10  1:51 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-10  1:49 [PATCH v2 00/23] PCI: aardvark controller fixes BATCH 4 Marek Behún
2022-01-10  1:49 ` [PATCH v2 01/23] PCI: aardvark: Replace custom PCIE_CORE_INT_* macros with PCI_INTERRUPT_* Marek Behún
2022-01-10 17:07   ` Bjorn Helgaas
2022-01-10  1:49 ` [PATCH v2 02/23] PCI: aardvark: Fix reading MSI interrupt number Marek Behún
2022-02-04 17:24   ` Lorenzo Pieralisi
2022-02-05 10:53     ` Marc Zyngier
2022-01-10  1:49 ` [PATCH v2 03/23] PCI: aardvark: Fix support for MSI interrupts Marek Behún
2022-01-10  1:49 ` [PATCH v2 04/23] PCI: aardvark: Rewrite IRQ code to chained IRQ handler Marek Behún
2022-01-10  1:50 ` [PATCH v2 05/23] PCI: aardvark: Check return value of generic_handle_domain_irq() when processing INTx IRQ Marek Behún
2022-01-10  1:50 ` [PATCH v2 06/23] PCI: aardvark: Make MSI irq_chip structures static driver structures Marek Behún
2022-01-10  1:50 ` [PATCH v2 07/23] PCI: aardvark: Make msi_domain_info structure a static driver structure Marek Behún
2022-01-10  1:50 ` [PATCH v2 08/23] PCI: aardvark: Use dev_fwnode() instead of of_node_to_fwnode(dev->of_node) Marek Behún
2022-01-10  1:50 ` [PATCH v2 09/23] PCI: aardvark: Refactor unmasking summary MSI interrupt Marek Behún
2022-01-10  1:50 ` [PATCH v2 10/23] PCI: aardvark: Add support for masking MSI interrupts Marek Behún
2022-01-10  1:50 ` [PATCH v2 11/23] PCI: aardvark: Fix setting MSI address Marek Behún
2022-02-17 17:14   ` Bjorn Helgaas
2022-02-18 14:43     ` Marek Behún
2022-02-23 18:13       ` Bjorn Helgaas
2022-02-24 12:59         ` Pali Rohár
2022-02-24 19:43           ` Bjorn Helgaas
2022-01-10  1:50 ` [PATCH v2 12/23] PCI: aardvark: Enable MSI-X support Marek Behún
2022-01-10  1:50 ` [PATCH v2 13/23] PCI: aardvark: Add support for ERR interrupt on emulated bridge Marek Behún
2022-01-10  1:50 ` Marek Behún [this message]
2022-01-10  1:50 ` [PATCH v2 15/23] PCI: aardvark: Optimize writing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME " Marek Behún
2022-01-10  1:50 ` [PATCH v2 16/23] PCI: aardvark: Add support for PME interrupts Marek Behún
2022-01-10  1:50 ` [PATCH v2 17/23] PCI: aardvark: Fix support for PME requester on emulated bridge Marek Behún
2022-01-10  1:50 ` [PATCH v2 18/23] PCI: aardvark: Use separate INTA interrupt for emulated root bridge Marek Behún
2022-01-10  1:50 ` [PATCH v2 19/23] PCI: aardvark: Remove irq_mask_ack callback for INTx interrupts Marek Behún
2022-01-10  1:50 ` [PATCH v2 20/23] PCI: aardvark: Don't mask irq when mapping Marek Behún
2022-01-10  1:50 ` [PATCH v2 21/23] PCI: aardvark: Drop __maybe_unused from advk_pcie_disable_phy() Marek Behún
2022-01-10  1:50 ` [PATCH v2 22/23] PCI: aardvark: Update comment about link going down after link-up Marek Behún
2022-01-10  1:50 ` [PATCH v2 23/23] PCI: aardvark: Make main irq_chip structure a static driver structure Marek Behún
2022-01-10  9:28   ` Marc Zyngier
2022-01-10 10:23     ` Marek Behún
2022-01-10 10:53     ` Pali Rohár
2022-01-10 14:44       ` Marc Zyngier
2022-01-10 15:19         ` Marek Behún
2022-02-08 10:50 ` (subset) [PATCH v2 00/23] PCI: aardvark controller fixes BATCH 4 Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220110015018.26359-15-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=helgaas@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=maz@kernel.org \
    --cc=pali@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).