From: "Pali Rohár" <pali@kernel.org>
To: "Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Marek Behún" <kabel@kernel.org>,
"Russell King" <rmk+kernel@armlinux.org.uk>,
"Andrew Lunn" <andrew@lunn.ch>,
"Gregory Clement" <gregory.clement@bootlin.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH v2 11/11] ARM: dts: armada-385.dtsi: Add definitions for PCIe legacy INTx interrupts
Date: Wed, 12 Jan 2022 16:18:14 +0100 [thread overview]
Message-ID: <20220112151814.24361-12-pali@kernel.org> (raw)
In-Reply-To: <20220112151814.24361-1-pali@kernel.org>
With this change legacy INTA, INTB, INTC and INTD interrupts are reported
separately and not mixed into one Linux virq source anymore.
Signed-off-by: Pali Rohár <pali@kernel.org>
---
arch/arm/boot/dts/armada-385.dtsi | 52 ++++++++++++++++++++++++++-----
1 file changed, 44 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index f0022d10c715..83392b92dae2 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -69,16 +69,25 @@
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+ <0 0 0 2 &pcie1_intc 1>,
+ <0 0 0 3 &pcie1_intc 2>,
+ <0 0 0 4 &pcie1_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 8>;
status = "disabled";
+ pcie1_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
/* x1 port */
@@ -88,16 +97,25 @@
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+ <0 0 0 2 &pcie2_intc 1>,
+ <0 0 0 3 &pcie2_intc 2>,
+ <0 0 0 4 &pcie2_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
+ pcie2_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
/* x1 port */
@@ -107,16 +125,25 @@
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+ <0 0 0 2 &pcie3_intc 1>,
+ <0 0 0 3 &pcie3_intc 2>,
+ <0 0 0 4 &pcie3_intc 3>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 6>;
status = "disabled";
+ pcie3_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
/*
@@ -129,16 +156,25 @@
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+ <0 0 0 2 &pcie4_intc 1>,
+ <0 0 0 3 &pcie4_intc 2>,
+ <0 0 0 4 &pcie4_intc 3>;
marvell,pcie-port = <3>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 7>;
status = "disabled";
+ pcie4_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
};
};
--
2.20.1
next prev parent reply other threads:[~2022-01-12 15:18 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-05 15:02 [PATCH 00/11] PCI: mvebu: subsystem ids, AER and INTx Pali Rohár
2022-01-05 15:02 ` [PATCH 01/11] PCI: pci-bridge-emul: Re-arrange register tests Pali Rohár
2022-01-05 15:02 ` [PATCH 02/11] PCI: pci-bridge-emul: Add support for PCIe extended capabilities Pali Rohár
2022-01-05 15:02 ` [PATCH 03/11] PCI: pci-bridge-emul: Add support for PCI Bridge Subsystem Vendor ID capability Pali Rohár
2022-01-05 15:02 ` [PATCH 04/11] dt-bindings: PCI: mvebu: Add num-lanes property Pali Rohár
2022-01-12 1:29 ` Rob Herring
2022-01-05 15:02 ` [PATCH 05/11] PCI: mvebu: Correctly configure x1/x4 mode Pali Rohár
2022-01-05 15:02 ` [PATCH 06/11] PCI: mvebu: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge Pali Rohár
2022-01-05 15:02 ` [PATCH 07/11] PCI: mvebu: Add support for Advanced Error Reporting registers " Pali Rohár
2022-01-05 15:02 ` [PATCH 08/11] PCI: mvebu: Use child_ops API Pali Rohár
2022-01-05 15:41 ` Rob Herring
2022-01-05 15:49 ` Pali Rohár
2022-01-12 1:43 ` Pali Rohár
2022-01-12 14:53 ` Rob Herring
2022-01-05 15:02 ` [PATCH 09/11] dt-bindings: PCI: mvebu: Update information about intx interrupts Pali Rohár
2022-01-12 1:30 ` Rob Herring
2022-01-05 15:02 ` [PATCH 10/11] PCI: mvebu: Implement support for legacy INTx interrupts Pali Rohár
2022-01-06 15:28 ` Marc Zyngier
2022-01-06 15:44 ` Pali Rohár
2022-01-06 15:55 ` Marc Zyngier
2022-01-06 16:20 ` Pali Rohár
2022-01-06 16:27 ` Marc Zyngier
2022-01-06 17:20 ` Marek Behún
2022-01-06 17:31 ` Marc Zyngier
2022-01-07 11:50 ` Pali Rohár
2022-01-07 18:53 ` Marc Zyngier
2022-01-05 15:02 ` [PATCH 11/11] ARM: dts: armada-385.dtsi: Add definitions for PCIe " Pali Rohár
2022-01-12 15:18 ` [PATCH v2 00/11] PCI: mvebu: subsystem ids, AER and INTx Pali Rohár
2022-01-12 15:18 ` [PATCH v2 01/11] PCI: pci-bridge-emul: Re-arrange register tests Pali Rohár
2022-01-12 15:18 ` [PATCH v2 02/11] PCI: pci-bridge-emul: Add support for PCIe extended capabilities Pali Rohár
2022-01-12 15:18 ` [PATCH v2 03/11] PCI: pci-bridge-emul: Add support for PCI Bridge Subsystem Vendor ID capability Pali Rohár
2022-01-12 15:18 ` [PATCH v2 04/11] dt-bindings: PCI: mvebu: Add num-lanes property Pali Rohár
2022-01-12 15:18 ` [PATCH v2 05/11] PCI: mvebu: Correctly configure x1/x4 mode Pali Rohár
2022-01-20 17:09 ` Rob Herring
2022-01-20 17:19 ` Pali Rohár
2022-01-12 15:18 ` [PATCH v2 06/11] PCI: mvebu: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge Pali Rohár
2022-01-12 15:18 ` [PATCH v2 07/11] PCI: mvebu: Add support for Advanced Error Reporting registers " Pali Rohár
2022-01-12 15:18 ` [PATCH v2 08/11] PCI: mvebu: Use child_ops API Pali Rohár
2022-01-20 16:49 ` Rob Herring
2022-01-20 16:55 ` Pali Rohár
2022-01-20 18:40 ` Rob Herring
2022-01-12 15:18 ` [PATCH v2 09/11] dt-bindings: PCI: mvebu: Update information about intx interrupts Pali Rohár
2022-01-12 15:36 ` Marek Behún
2022-01-12 15:18 ` [PATCH v2 10/11] PCI: mvebu: Implement support for legacy INTx interrupts Pali Rohár
2022-02-11 17:19 ` Lorenzo Pieralisi
2022-02-11 17:52 ` Pali Rohár
2022-02-11 18:21 ` Lorenzo Pieralisi
2022-02-12 10:59 ` Marc Zyngier
2022-02-16 23:40 ` Pali Rohár
2022-02-22 10:21 ` Lorenzo Pieralisi
2022-02-22 10:51 ` Pali Rohár
2022-02-22 15:24 ` Lorenzo Pieralisi
2022-02-22 15:42 ` Pali Rohár
2022-02-22 15:45 ` Lorenzo Pieralisi
2022-02-22 15:55 ` Pali Rohár
2022-01-12 15:18 ` Pali Rohár [this message]
2022-02-14 15:07 ` [PATCH v2 11/11] ARM: dts: armada-385.dtsi: Add definitions for PCIe " Gregory CLEMENT
2022-02-14 15:09 ` Pali Rohár
2022-02-14 15:26 ` Gregory CLEMENT
[not found] ` <CAEzXK1qYKVk7QiSY_DwqkZ7WV6WU06WBtiqZx0JJCc+mOP-7Kg@mail.gmail.com>
2022-02-15 10:48 ` Luís Mendes
2022-02-15 10:52 ` Pali Rohár
2022-02-18 21:53 ` Luís Mendes
2022-02-19 13:36 ` Pali Rohár
2022-02-11 17:50 ` [PATCH 00/11] PCI: mvebu: subsystem ids, AER and INTx Lorenzo Pieralisi
2022-02-11 18:01 ` Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220112151814.24361-12-pali@kernel.org \
--to=pali@kernel.org \
--cc=andrew@lunn.ch \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=kabel@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=robh+dt@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).