From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: "Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <bjorn.andersson@linaro.org>,
"Stanimir Varbanov" <svarbanov@mm-sol.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Michael Turquette" <mturquette@baylibre.com>,
"Stephen Boyd" <swboyd@chromium.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
Prasad Malisetty <pmaliset@codeaurora.org>,
Vinod Koul <vkoul@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v2 07/11] PCI: qcom: Remove unnecessary pipe_clk handling
Date: Fri, 4 Feb 2022 17:46:41 +0300 [thread overview]
Message-ID: <20220204144645.3016603-8-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220204144645.3016603-1-dmitry.baryshkov@linaro.org>
QMP PHY driver already does clk_prepare_enable()/_disable() pipe_clk.
Remove extra calls to enable/disable this clock from the PCIe driver, so
that the PHY driver can manage the clock on its own.
Fixes: aa9c0df98c29 ("PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/pci/controller/dwc/pcie-qcom.c | 53 ++------------------------
1 file changed, 3 insertions(+), 50 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 85c2ad8c551c..85e84b621dbc 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -128,7 +128,6 @@ struct qcom_pcie_resources_2_3_2 {
struct clk *master_clk;
struct clk *slave_clk;
struct clk *cfg_clk;
- struct clk *pipe_clk;
struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
};
@@ -165,7 +164,6 @@ struct qcom_pcie_resources_2_7_0 {
int num_clks;
struct regulator_bulk_data supplies[2];
struct reset_control *pci_reset;
- struct clk *pipe_clk;
struct clk *pipe_clk_src;
struct clk *phy_pipe_clk;
struct clk *ref_clk_src;
@@ -591,11 +589,7 @@ static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
return PTR_ERR(res->master_clk);
res->slave_clk = devm_clk_get(dev, "bus_slave");
- if (IS_ERR(res->slave_clk))
- return PTR_ERR(res->slave_clk);
-
- res->pipe_clk = devm_clk_get(dev, "pipe");
- return PTR_ERR_OR_ZERO(res->pipe_clk);
+ return PTR_ERR_OR_ZERO(res->slave_clk);
}
static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
@@ -610,13 +604,6 @@ static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
}
-static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie)
-{
- struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
-
- clk_disable_unprepare(res->pipe_clk);
-}
-
static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
@@ -691,22 +678,6 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
return ret;
}
-static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
-{
- struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
- struct dw_pcie *pci = pcie->pci;
- struct device *dev = pci->dev;
- int ret;
-
- ret = clk_prepare_enable(res->pipe_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable pipe clock\n");
- return ret;
- }
-
- return 0;
-}
-
static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
@@ -1190,8 +1161,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
return PTR_ERR(res->ref_clk_src);
}
- res->pipe_clk = devm_clk_get(dev, "pipe");
- return PTR_ERR_OR_ZERO(res->pipe_clk);
+ return 0;
}
static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
@@ -1230,12 +1200,6 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
goto err_disable_clocks;
}
- ret = clk_prepare_enable(res->pipe_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable pipe clock\n");
- goto err_disable_clocks;
- }
-
/* configure PCIe to RC mode */
writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE);
@@ -1287,14 +1251,7 @@ static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
if (pcie->pipe_clk_need_muxing)
clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
- return clk_prepare_enable(res->pipe_clk);
-}
-
-static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie)
-{
- struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
-
- clk_disable_unprepare(res->pipe_clk);
+ return 0;
}
static int qcom_pcie_link_up(struct dw_pcie *pci)
@@ -1444,9 +1401,7 @@ static const struct qcom_pcie_ops ops_1_0_0 = {
static const struct qcom_pcie_ops ops_2_3_2 = {
.get_resources = qcom_pcie_get_resources_2_3_2,
.init = qcom_pcie_init_2_3_2,
- .post_init = qcom_pcie_post_init_2_3_2,
.deinit = qcom_pcie_deinit_2_3_2,
- .post_deinit = qcom_pcie_post_deinit_2_3_2,
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
};
@@ -1473,7 +1428,6 @@ static const struct qcom_pcie_ops ops_2_7_0 = {
.deinit = qcom_pcie_deinit_2_7_0,
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
.post_init = qcom_pcie_post_init_2_7_0,
- .post_deinit = qcom_pcie_post_deinit_2_7_0,
};
/* Qcom IP rev.: 1.9.0 */
@@ -1483,7 +1437,6 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
.deinit = qcom_pcie_deinit_2_7_0,
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
.post_init = qcom_pcie_post_init_2_7_0,
- .post_deinit = qcom_pcie_post_deinit_2_7_0,
.config_sid = qcom_pcie_config_sid_sm8250,
};
--
2.34.1
next prev parent reply other threads:[~2022-02-04 14:46 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-04 14:46 [PATCH v2 00/11] PCI: qcom: add support for PCIe on SM8450 platform Dmitry Baryshkov
2022-02-04 14:46 ` [PATCH v2 01/11] dt-bindings: pci: qcom,pcie: drop unused "pipe" clocks Dmitry Baryshkov
2022-02-09 22:22 ` Rob Herring
2022-02-04 14:46 ` [PATCH v2 02/11] dt-bindings: pci: qcom: Document PCIe bindings for SM8450 Dmitry Baryshkov
2022-02-04 14:46 ` [PATCH v2 03/11] clk: qcom: gdsc: add support for clocks tied to the GDSC Dmitry Baryshkov
2022-02-04 22:05 ` Bjorn Andersson
2022-02-09 22:41 ` Dmitry Baryshkov
2022-02-11 19:52 ` Dmitry Baryshkov
2022-02-15 10:24 ` Prasad Malisetty (Temp) (QUIC)
2022-02-25 1:55 ` Dmitry Baryshkov
2022-03-01 6:42 ` Prasad Malisetty
2022-03-01 6:47 ` Dmitry Baryshkov
2022-03-01 17:43 ` Bjorn Andersson
2022-02-04 14:46 ` [PATCH v2 04/11] clk: qcom: gcc-sc7280: switch PCIe GDSCs to pipe_clk_gdsc Dmitry Baryshkov
2022-02-04 14:46 ` [PATCH v2 05/11] clk: qcom: gcc-sm8450: " Dmitry Baryshkov
2022-02-04 14:46 ` [PATCH v2 06/11] PCI: qcom: Balance pm_runtime_foo() calls Dmitry Baryshkov
2022-02-04 14:46 ` Dmitry Baryshkov [this message]
2022-02-04 14:46 ` [PATCH v2 08/11] PCI: qcom: Remove pipe_clk_src reparenting Dmitry Baryshkov
2022-02-04 14:46 ` [PATCH v2 09/11] PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfg Dmitry Baryshkov
2022-02-04 14:46 ` [PATCH v2 10/11] PCI: qcom: Add ddrss_sf_tbu flag Dmitry Baryshkov
2022-02-04 14:46 ` [PATCH v2 11/11] PCI: qcom: Add SM8450 PCIe support Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220204144645.3016603-8-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=bhelgaas@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mturquette@baylibre.com \
--cc=pmaliset@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=svarbanov@mm-sol.com \
--cc=swboyd@chromium.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).