linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: "Marek Behún" <kabel@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	pali@kernel.org, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, stable@vger.kernel.org
Subject: Re: [PATCH v2 11/23] PCI: aardvark: Fix setting MSI address
Date: Thu, 17 Feb 2022 11:14:52 -0600	[thread overview]
Message-ID: <20220217171452.GA286231@bhelgaas> (raw)
In-Reply-To: <20220110015018.26359-12-kabel@kernel.org>

On Mon, Jan 10, 2022 at 02:50:06AM +0100, Marek Behún wrote:
> From: Pali Rohár <pali@kernel.org>
> 
> MSI address for receiving MSI interrupts needs to be correctly set before
> enabling processing of MSI interrupts.
> 
> Move code for setting PCIE_MSI_ADDR_LOW_REG and PCIE_MSI_ADDR_HIGH_REG
> from advk_pcie_init_msi_irq_domain() to advk_pcie_setup_hw(), before
> enabling PCIE_CORE_CTRL2_MSI_ENABLE.
> 
> After this we can remove the now unused member msi_msg, which was used
> only for MSI doorbell address. MSI address can be any address which cannot
> be used to DMA to. So change it to the address of the main struct advk_pcie.
> 
> Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
> Signed-off-by: Pali Rohár <pali@kernel.org>
> Acked-by: Marc Zyngier <maz@kernel.org>
> Signed-off-by: Marek Behún <kabel@kernel.org>
> Cc: stable@vger.kernel.org # f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support")
> ---
>  drivers/pci/controller/pci-aardvark.c | 21 +++++++++------------
>  1 file changed, 9 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> index 51fedbcb41fb..79102704d82f 100644
> --- a/drivers/pci/controller/pci-aardvark.c
> +++ b/drivers/pci/controller/pci-aardvark.c
> @@ -278,7 +278,6 @@ struct advk_pcie {
>  	raw_spinlock_t msi_irq_lock;
>  	DECLARE_BITMAP(msi_used, MSI_IRQ_NUM);
>  	struct mutex msi_used_lock;
> -	u16 msi_msg;
>  	int link_gen;
>  	struct pci_bridge_emul bridge;
>  	struct gpio_desc *reset_gpio;
> @@ -473,6 +472,7 @@ static void advk_pcie_disable_ob_win(struct advk_pcie *pcie, u8 win_num)
>  
>  static void advk_pcie_setup_hw(struct advk_pcie *pcie)
>  {
> +	phys_addr_t msi_addr;
>  	u32 reg;
>  	int i;
>  
> @@ -561,6 +561,11 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
>  	reg |= LANE_COUNT_1;
>  	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
>  
> +	/* Set MSI address */
> +	msi_addr = virt_to_phys(pcie);

Strictly speaking, msi_addr should be a pci_bus_addr_t, not a
phys_addr_t, and virt_to_phys() doesn't return a bus address.

> +	advk_writel(pcie, lower_32_bits(msi_addr), PCIE_MSI_ADDR_LOW_REG);
> +	advk_writel(pcie, upper_32_bits(msi_addr), PCIE_MSI_ADDR_HIGH_REG);
> +
>  	/* Enable MSI */
>  	reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
>  	reg |= PCIE_CORE_CTRL2_MSI_ENABLE;
> @@ -1184,10 +1189,10 @@ static void advk_msi_irq_compose_msi_msg(struct irq_data *data,
>  					 struct msi_msg *msg)
>  {
>  	struct advk_pcie *pcie = irq_data_get_irq_chip_data(data);
> -	phys_addr_t msi_msg = virt_to_phys(&pcie->msi_msg);
> +	phys_addr_t msi_addr = virt_to_phys(pcie);
>  
> -	msg->address_lo = lower_32_bits(msi_msg);
> -	msg->address_hi = upper_32_bits(msi_msg);
> +	msg->address_lo = lower_32_bits(msi_addr);
> +	msg->address_hi = upper_32_bits(msi_addr);
>  	msg->data = data->hwirq;
>  }
>  
> @@ -1346,18 +1351,10 @@ static struct msi_domain_info advk_msi_domain_info = {
>  static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
>  {
>  	struct device *dev = &pcie->pdev->dev;
> -	phys_addr_t msi_msg_phys;
>  
>  	raw_spin_lock_init(&pcie->msi_irq_lock);
>  	mutex_init(&pcie->msi_used_lock);
>  
> -	msi_msg_phys = virt_to_phys(&pcie->msi_msg);
> -
> -	advk_writel(pcie, lower_32_bits(msi_msg_phys),
> -		    PCIE_MSI_ADDR_LOW_REG);
> -	advk_writel(pcie, upper_32_bits(msi_msg_phys),
> -		    PCIE_MSI_ADDR_HIGH_REG);
> -
>  	pcie->msi_inner_domain =
>  		irq_domain_add_linear(NULL, MSI_IRQ_NUM,
>  				      &advk_msi_domain_ops, pcie);
> -- 
> 2.34.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-02-17 17:14 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-10  1:49 [PATCH v2 00/23] PCI: aardvark controller fixes BATCH 4 Marek Behún
2022-01-10  1:49 ` [PATCH v2 01/23] PCI: aardvark: Replace custom PCIE_CORE_INT_* macros with PCI_INTERRUPT_* Marek Behún
2022-01-10 17:07   ` Bjorn Helgaas
2022-01-10  1:49 ` [PATCH v2 02/23] PCI: aardvark: Fix reading MSI interrupt number Marek Behún
2022-02-04 17:24   ` Lorenzo Pieralisi
2022-02-05 10:53     ` Marc Zyngier
2022-01-10  1:49 ` [PATCH v2 03/23] PCI: aardvark: Fix support for MSI interrupts Marek Behún
2022-01-10  1:49 ` [PATCH v2 04/23] PCI: aardvark: Rewrite IRQ code to chained IRQ handler Marek Behún
2022-01-10  1:50 ` [PATCH v2 05/23] PCI: aardvark: Check return value of generic_handle_domain_irq() when processing INTx IRQ Marek Behún
2022-01-10  1:50 ` [PATCH v2 06/23] PCI: aardvark: Make MSI irq_chip structures static driver structures Marek Behún
2022-01-10  1:50 ` [PATCH v2 07/23] PCI: aardvark: Make msi_domain_info structure a static driver structure Marek Behún
2022-01-10  1:50 ` [PATCH v2 08/23] PCI: aardvark: Use dev_fwnode() instead of of_node_to_fwnode(dev->of_node) Marek Behún
2022-01-10  1:50 ` [PATCH v2 09/23] PCI: aardvark: Refactor unmasking summary MSI interrupt Marek Behún
2022-01-10  1:50 ` [PATCH v2 10/23] PCI: aardvark: Add support for masking MSI interrupts Marek Behún
2022-01-10  1:50 ` [PATCH v2 11/23] PCI: aardvark: Fix setting MSI address Marek Behún
2022-02-17 17:14   ` Bjorn Helgaas [this message]
2022-02-18 14:43     ` Marek Behún
2022-02-23 18:13       ` Bjorn Helgaas
2022-02-24 12:59         ` Pali Rohár
2022-02-24 19:43           ` Bjorn Helgaas
2022-01-10  1:50 ` [PATCH v2 12/23] PCI: aardvark: Enable MSI-X support Marek Behún
2022-01-10  1:50 ` [PATCH v2 13/23] PCI: aardvark: Add support for ERR interrupt on emulated bridge Marek Behún
2022-01-10  1:50 ` [PATCH v2 14/23] PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit " Marek Behún
2022-01-10  1:50 ` [PATCH v2 15/23] PCI: aardvark: Optimize writing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME " Marek Behún
2022-01-10  1:50 ` [PATCH v2 16/23] PCI: aardvark: Add support for PME interrupts Marek Behún
2022-01-10  1:50 ` [PATCH v2 17/23] PCI: aardvark: Fix support for PME requester on emulated bridge Marek Behún
2022-01-10  1:50 ` [PATCH v2 18/23] PCI: aardvark: Use separate INTA interrupt for emulated root bridge Marek Behún
2022-01-10  1:50 ` [PATCH v2 19/23] PCI: aardvark: Remove irq_mask_ack callback for INTx interrupts Marek Behún
2022-01-10  1:50 ` [PATCH v2 20/23] PCI: aardvark: Don't mask irq when mapping Marek Behún
2022-01-10  1:50 ` [PATCH v2 21/23] PCI: aardvark: Drop __maybe_unused from advk_pcie_disable_phy() Marek Behún
2022-01-10  1:50 ` [PATCH v2 22/23] PCI: aardvark: Update comment about link going down after link-up Marek Behún
2022-01-10  1:50 ` [PATCH v2 23/23] PCI: aardvark: Make main irq_chip structure a static driver structure Marek Behún
2022-01-10  9:28   ` Marc Zyngier
2022-01-10 10:23     ` Marek Behún
2022-01-10 10:53     ` Pali Rohár
2022-01-10 14:44       ` Marc Zyngier
2022-01-10 15:19         ` Marek Behún
2022-02-08 10:50 ` (subset) [PATCH v2 00/23] PCI: aardvark controller fixes BATCH 4 Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220217171452.GA286231@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=kabel@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=maz@kernel.org \
    --cc=pali@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).