From 0262b9f32ac2626f4febfa56e6a7f9270a363713 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Thu, 23 Dec 2021 14:43:54 +0300 Subject: [PATCH] PCI: dwc: Don't use generic IO-ops for DBI-space access Commit c2b0c098fbd1 ("PCI: dwc: Use generic config accessors") replaced the locally defined DW PCIe host controller config-space accessors with the generic methods pci_generic_config_read() and pci_generic_config_write(). It was intended that the corresponding bus-mapping callback returned a correct virtual address of the passed PCI config-space register. The problem of the proposed solution was that it didn't take into account the way the host config-space is accessed on the DW PCIe. Depending on the DW PCIe IP-core synthesize parameters different interfaces can be used to access the host and peripheral config/memory spaces. The former one can be accessed via the DBI interface, while the later ones is reached via the AHB/AXI application bus. In case if the DW PCIe controller is configured to have a dedicated DBI interface, the way it is mapped into the IO-memory turns to be platform-specific. For such setups the DWC PCIe driver provides a set of the callbacks dw_pcie_ops.{read_dbi,write_dbi} so the platforms glue-drivers would be able to take into account the DBI bus IO peculiarities. Since commit c2b0c098fbd1 ("PCI: dwc: Use generic config accessors") these methods haven't been utilized during the generic host initialization performed by the PCIe subsystem code. I don't really know how come there have been no problems spotted for the Histb/Exynos/Kirin PCIe controllers so far, but in our case with dword aligned IO requirement the generic config-space accessors can't be utilized for the host config-space. Thus in order to make sure the host config-space is properly accessed via the DBI bus let's get back the dw_pcie_rd_own_conf() and dw_pcie_wr_own_conf() methods. They are going to be just wrappers around the already defined dw_pcie_read_dbi()/dw_pcie_write_dbi() functions with proper arguments conversion. These methods perform the platform-specific config-space IO if the DBI accessors are specified, otherwise they call normal MMIO operations. Fixes: c2b0c098fbd1 ("PCI: dwc: Use generic config accessors") Signed-off-by: Serge Semin --- .../pci/controller/dwc/pcie-designware-host.c | 34 +++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 6beccc195cab..03fb2650c825 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -527,10 +527,40 @@ void __iomem *dw_pcie_own_conf_map_bus(struct pci_bus *bus, unsigned int devfn, } EXPORT_SYMBOL_GPL(dw_pcie_own_conf_map_bus); +static int dw_pcie_rd_own_conf(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + struct pcie_port *pp = bus->sysdata; + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + + if (PCI_SLOT(devfn) > 0) { + *val = ~0U; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + *val = dw_pcie_read_dbi(pci, where, size); + + return PCIBIOS_SUCCESSFUL; +} + +static int dw_pcie_wr_own_conf(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + struct pcie_port *pp = bus->sysdata; + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + + if (PCI_SLOT(devfn) > 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + dw_pcie_write_dbi(pci, where, size, val); + + return PCIBIOS_SUCCESSFUL; +} + static struct pci_ops dw_pcie_ops = { .map_bus = dw_pcie_own_conf_map_bus, - .read = pci_generic_config_read, - .write = pci_generic_config_write, + .read = dw_pcie_rd_own_conf, + .write = dw_pcie_wr_own_conf, }; void dw_pcie_setup_rc(struct pcie_port *pp) -- 2.35.1