linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
To: bhelgaas@google.com
Cc: mika.westerberg@linux.intel.com, koba.ko@canonical.com,
	baolu.lu@linux.intel.com,
	sathyanarayanan.kuppuswamy@linux.intel.com,
	Kai-Heng Feng <kai.heng.feng@canonical.com>,
	Russell Currey <ruscur@russell.cc>,
	"Oliver O'Halloran" <oohall@gmail.com>,
	linuxppc-dev@lists.ozlabs.org, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/2] PCI/DPC: Disable DPC service when link is in L2/L3 ready, L2 and L3 state
Date: Tue, 29 Mar 2022 16:31:29 +0800	[thread overview]
Message-ID: <20220329083130.817316-2-kai.heng.feng@canonical.com> (raw)
In-Reply-To: <20220329083130.817316-1-kai.heng.feng@canonical.com>

On some Intel AlderLake platforms, Thunderbolt entering D3cold can cause
some errors reported by AER:
[   30.100211] pcieport 0000:00:1d.0: AER: Uncorrected (Non-Fatal) error received: 0000:00:1d.0
[   30.100251] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
[   30.100256] pcieport 0000:00:1d.0:   device [8086:7ab0] error status/mask=00100000/00004000
[   30.100262] pcieport 0000:00:1d.0:    [20] UnsupReq               (First)
[   30.100267] pcieport 0000:00:1d.0: AER:   TLP Header: 34000000 08000052 00000000 00000000
[   30.100372] thunderbolt 0000:0a:00.0: AER: can't recover (no error_detected callback)
[   30.100401] xhci_hcd 0000:3e:00.0: AER: can't recover (no error_detected callback)
[   30.100427] pcieport 0000:00:1d.0: AER: device recovery failed

Since AER is disabled in previous patch for a Link in L2/L3 Ready, L2
and L3, also disable DPC here as DPC depends on AER to work.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215453
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v3:
 - Wording change to make the patch more clear.

v2:
 - Wording change.
 - Empty line dropped.

 drivers/pci/pcie/dpc.c | 60 +++++++++++++++++++++++++++++++-----------
 1 file changed, 44 insertions(+), 16 deletions(-)

diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 3e9afee02e8d1..414258967f08e 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -343,13 +343,33 @@ void pci_dpc_init(struct pci_dev *pdev)
 	}
 }
 
+static void dpc_enable(struct pcie_device *dev)
+{
+	struct pci_dev *pdev = dev->port;
+	u16 ctl;
+
+	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, &ctl);
+	ctl = (ctl & 0xfff4) | PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN;
+	pci_write_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, ctl);
+}
+
+static void dpc_disable(struct pcie_device *dev)
+{
+	struct pci_dev *pdev = dev->port;
+	u16 ctl;
+
+	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, &ctl);
+	ctl &= ~(PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN);
+	pci_write_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, ctl);
+}
+
 #define FLAG(x, y) (((x) & (y)) ? '+' : '-')
 static int dpc_probe(struct pcie_device *dev)
 {
 	struct pci_dev *pdev = dev->port;
 	struct device *device = &dev->device;
 	int status;
-	u16 ctl, cap;
+	u16 cap;
 
 	if (!pcie_aer_is_native(pdev) && !pcie_ports_dpc_native)
 		return -ENOTSUPP;
@@ -364,10 +384,7 @@ static int dpc_probe(struct pcie_device *dev)
 	}
 
 	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CAP, &cap);
-	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, &ctl);
-
-	ctl = (ctl & 0xfff4) | PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN;
-	pci_write_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, ctl);
+	dpc_enable(dev);
 	pci_info(pdev, "enabled with IRQ %d\n", dev->irq);
 
 	pci_info(pdev, "error containment capabilities: Int Msg #%d, RPExt%c PoisonedTLP%c SwTrigger%c RP PIO Log %d, DL_ActiveErr%c\n",
@@ -380,22 +397,33 @@ static int dpc_probe(struct pcie_device *dev)
 	return status;
 }
 
-static void dpc_remove(struct pcie_device *dev)
+static int dpc_suspend(struct pcie_device *dev)
 {
-	struct pci_dev *pdev = dev->port;
-	u16 ctl;
+	dpc_disable(dev);
+	return 0;
+}
 
-	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, &ctl);
-	ctl &= ~(PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN);
-	pci_write_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, ctl);
+static int dpc_resume(struct pcie_device *dev)
+{
+	dpc_enable(dev);
+	return 0;
+}
+
+static void dpc_remove(struct pcie_device *dev)
+{
+	dpc_disable(dev);
 }
 
 static struct pcie_port_service_driver dpcdriver = {
-	.name		= "dpc",
-	.port_type	= PCIE_ANY_PORT,
-	.service	= PCIE_PORT_SERVICE_DPC,
-	.probe		= dpc_probe,
-	.remove		= dpc_remove,
+	.name			= "dpc",
+	.port_type		= PCIE_ANY_PORT,
+	.service		= PCIE_PORT_SERVICE_DPC,
+	.probe			= dpc_probe,
+	.suspend		= dpc_suspend,
+	.resume			= dpc_resume,
+	.runtime_suspend	= dpc_suspend,
+	.runtime_resume		= dpc_resume,
+	.remove			= dpc_remove,
 };
 
 int __init pcie_dpc_init(void)
-- 
2.34.1


  reply	other threads:[~2022-03-29  8:32 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-29  8:31 [PATCH v3 1/2] PCI/AER: Disable AER service when link is in L2/L3 ready, L2 and L3 state Kai-Heng Feng
2022-03-29  8:31 ` Kai-Heng Feng [this message]
2022-03-30 19:40 ` Sathyanarayanan Kuppuswamy
2022-04-08 11:26   ` Kai-Heng Feng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220329083130.817316-2-kai.heng.feng@canonical.com \
    --to=kai.heng.feng@canonical.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=koba.ko@canonical.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=oohall@gmail.com \
    --cc=ruscur@russell.cc \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).