From: Serge Semin <fancer.lancer@gmail.com>
To: Zhi Li <lznuaa@gmail.com>
Cc: "Frank Li" <Frank.Li@nxp.com>,
"Gustavo Pimentel" <gustavo.pimentel@synopsys.com>,
"Vinod Koul" <vkoul@kernel.org>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Serge Semin" <Sergey.Semin@baikalelectronics.ru>,
hongxing.zhu@nxp.com, "Lucas Stach" <l.stach@pengutronix.de>,
dl-linux-imx <linux-imx@nxp.com>,
linux-pci@vger.kernel.org, dmaengine@vger.kernel.org,
"Bjorn Helgaas" <helgaas@kernel.org>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>
Subject: Re: [PATCH v9 0/9] Enable designware PCI EP EDMA locally
Date: Fri, 22 Apr 2022 21:13:16 +0300 [thread overview]
Message-ID: <20220422181316.jlkf4fjt3llbgebc@mobilestation> (raw)
In-Reply-To: <CAHrpEqR4DiShMXsWeJ=1WKoFCyNc+Oeb79DXumkzSNL9DRX-4A@mail.gmail.com>
On Fri, Apr 22, 2022 at 12:57:32PM -0500, Zhi Li wrote:
> On Fri, Apr 22, 2022 at 12:53 PM Serge Semin <fancer.lancer@gmail.com> wrote:
> >
> > Hello folks,
> >
> > My review is finally over. Aside with that I've tested the series on
> > Baikal-T1 SoC, which has DW PCIe Host controller v4.60 and DW eDMA
> > embedded. A test was performed on kernel v5.18-rc3 by a simple driver
> > copying random data from system memory to SM768 framebuffer and
> > vise-versa. So @Frank feel free to add my tag to the entire series:
> >
> > Tested-by: Serge Semin <fancer.lancer@gmail.com>
>
> Thanks. I think the maintainer can add this when they pick up the patches.
> I will add it if patches need to be respin.
Right, 'b4 am -t' does the trick.
-Sergey
>
> best regards
> Frank Li
>
> >
> > @Lorenzo, @Rob, @Vinod, my patchset:
> > Link: https://lore.kernel.org/linux-pci/20220324014836.19149-1-Sergey.Semin@baikalelectronics.ru
> > is based on this one. In its turn my series depends on the other
> > patchsets:
> > [PATCH v2 0/4] clk: Baikal-T1 DDR/PCIe resets and some xGMAC fixes
> > Link: [https://lore.kernel.org/linux-pci/20220330144320.27039-1-Sergey.Semin@baikalelectronics.ru
> > [PATCH 00/12] PCI: dwc: Various fixes and cleanups
> > Link: https://lore.kernel.org/linux-pci/20220324012524.16784-1-Sergey.Semin@baikalelectronics.ru
> > [PATCH 00/16] PCI: dwc: Add dma-ranges/YAML-schema/Baikal-T1 support
> > https://lore.kernel.org/linux-pci/20220324013734.18234-1-Sergey.Semin@baikalelectronics.ru
> > which are currently on review. (BTW @Rob I am waiting for your
> > responses there to go on with v2 re-spin.) I am very much eager to get
> > my patches ready before the next merge windows. But in order to
> > preserve the consistency of the corresponding repo with my patchsets
> > it needs to have the @Frank' patches. Seeing aside with @Frank's
> > series my changes depends on the changes in the clk and pci
> > subsystems, could you please consider choosing a single repository for
> > merging all my and @Frank patches in. Since the changes mostly concern
> > the DW PCIe controller I suggest to use the 'pci/dwc' branch of the
> > 'kernel/git/lpieralisi/pci.git' repository. What do you think?
> > @Lorenzo?
> >
> > -Sergey
> >
> > On Fri, Apr 22, 2022 at 09:36:34AM -0500, Frank Li wrote:
> > > Default Designware EDMA just probe remotely at host side.
> > > This patch allow EDMA driver can probe at EP side.
> > >
> > > 1. Clean up patch
> > > dmaengine: dw-edma: Detach the private data and chip info structures
> > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip
> > > dmaengine: dw-edma: Change rg_region to reg_base in struct
> > > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct
> > >
> > > 2. Enhance EDMA driver to allow prode eDMA at EP side
> > > dmaengine: dw-edma: Add support for chip specific flags
> > > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific flags
> > >
> > > 3. Bugs fix at EDMA driver when probe eDMA at EP side
> > > dmaengine: dw-edma: Fix programming the source & dest addresses for ep
> > > dmaengine: dw-edma: Don't rely on the deprecated "direction" member
> > >
> > > 4. change pci-epf-test to use EDMA driver to transfer data.
> > > PCI: endpoint: Add embedded DMA controller test
> > >
> > > 5. Using imx8dxl to do test, but some EP functions still have not
> > > upstream yet. So below patch show how probe eDMA driver at EP
> > > controller driver.
> > > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097
> > >
> > > Frank Li (7):
> > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip
> > > dmaengine: dw-edma: Detach the private data and chip info structures
> > > dmaengine: dw-edma: Change rg_region to reg_base in struct
> > > dw_edma_chip
> > > dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct
> > > dw_edma_chip
> > > dmaengine: dw-edma: Add support for chip specific flags
> > > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific flags
> > > PCI: endpoint: Add embedded DMA controller test
> > >
> > > Serge Semin (2):
> > > dmaengine: dw-edma: Drop dma_slave_config.direction field usage
> > > dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction
> > > semantics
> > >
> > > drivers/dma/dw-edma/dw-edma-core.c | 139 +++++++++++-------
> > > drivers/dma/dw-edma/dw-edma-core.h | 31 +---
> > > drivers/dma/dw-edma/dw-edma-pcie.c | 83 +++++------
> > > drivers/dma/dw-edma/dw-edma-v0-core.c | 54 ++++---
> > > drivers/dma/dw-edma/dw-edma-v0-core.h | 4 +-
> > > drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 10 +-
> > > drivers/pci/endpoint/functions/pci-epf-test.c | 108 ++++++++++++--
> > > include/linux/dma/edma.h | 59 +++++++-
> > > 8 files changed, 312 insertions(+), 176 deletions(-)
> > >
> > > --
> > > 2.35.1
> > >
prev parent reply other threads:[~2022-04-22 18:26 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-22 14:36 [PATCH v9 0/9] Enable designware PCI EP EDMA locally Frank Li
2022-04-22 14:36 ` [PATCH v9 1/9] dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip Frank Li
2022-04-23 11:49 ` Manivannan Sadhasivam
2022-04-22 14:36 ` [PATCH v9 2/9] dmaengine: dw-edma: Detach the private data and chip info structures Frank Li
2022-04-22 17:23 ` Serge Semin
2022-04-23 11:57 ` Manivannan Sadhasivam
2022-04-22 14:36 ` [PATCH v9 3/9] dmaengine: dw-edma: Change rg_region to reg_base in struct dw_edma_chip Frank Li
2022-04-23 11:59 ` Manivannan Sadhasivam
2022-04-22 14:36 ` [PATCH v9 4/9] dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt " Frank Li
2022-04-23 12:12 ` Manivannan Sadhasivam
2022-04-23 21:47 ` Zhi Li
2022-04-27 16:45 ` Zhi Li
2022-04-27 17:18 ` Manivannan Sadhasivam
2022-04-22 14:36 ` [PATCH v9 5/9] dmaengine: dw-edma: Drop dma_slave_config.direction field usage Frank Li
2022-04-22 14:36 ` [PATCH v9 6/9] dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction semantics Frank Li
2022-04-22 14:36 ` [PATCH v9 7/9] dmaengine: dw-edma: Add support for chip specific flags Frank Li
2022-04-23 12:14 ` Manivannan Sadhasivam
2022-04-22 14:36 ` [PATCH v9 8/9] dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI " Frank Li
2022-04-23 12:16 ` Manivannan Sadhasivam
2022-04-22 14:36 ` [PATCH v9 9/9] PCI: endpoint: Add embedded DMA controller test Frank Li
2022-04-23 12:20 ` Manivannan Sadhasivam
2022-04-27 9:30 ` Lorenzo Pieralisi
2022-04-27 17:01 ` Zhi Li
2022-04-29 15:38 ` Zhi Li
2022-04-22 17:53 ` [PATCH v9 0/9] Enable designware PCI EP EDMA locally Serge Semin
2022-04-22 17:57 ` Zhi Li
2022-04-22 18:13 ` Serge Semin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220422181316.jlkf4fjt3llbgebc@mobilestation \
--to=fancer.lancer@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=Sergey.Semin@baikalelectronics.ru \
--cc=bhelgaas@google.com \
--cc=dmaengine@vger.kernel.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=helgaas@kernel.org \
--cc=hongxing.zhu@nxp.com \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=linux-imx@nxp.com \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=lznuaa@gmail.com \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).