[PATCH v5] PCI: Make sure the bus bridge powered on when scanning bus

[PATCH v5] PCI: Make sure the bus bridge powered on when scanning bus

[Yicong Yang]

When the bus bridge is runtime suspended, we'll fail to rescan
the devices through sysfs as we cannot access the configuration
space correctly when the bridge is in D3hot.
It can be reproduced like:

$ echo 1 > /sys/bus/pci/devices/0000:80:00.0/0000:81:00.1/remove
$ echo 1 > /sys/bus/pci/devices/0000:80:00.0/pci_bus/0000:81/rescan

0000:80:00.0 is a Root Port and it is runtime-suspended, so
0000:81:00.1 is unreachable after a rescan.

Power up the bridge when scanning the child bus and allow it to
suspend again by adding pm_runtime_get_sync()/pm_runtime_put()
in pci_scan_child_bus_extend().

Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
Change since v4:
- rephrase the commit suggested by Rafael
Link: https://lore.kernel.org/lkml/20220422080404.27724-1-yangyicong@hisilicon.com/

Change since v3:
- retain the pm_runtime_*() calls in pci_scan_bridge_extend() as Rafael points
  out that it's necessary when the brigde is in D3cold
Link: https://lore.kernel.org/linux-pci/20220414123736.34150-1-yangyicong@hisilicon.com/

Change since v2:
- just rebase it on v5.18-rc2
Link: https://lore.kernel.org/linux-pci/1601029386-4928-1-git-send-email-yangyicong@hisilicon.com/

Change since v1:
- use an intermediate variable *bridge as suggested
- remove the pm_runtime_*() calls in pci_scan_bridge_extend()
Link: https://lore.kernel.org/linux-pci/1596022223-4765-1-git-send-email-yangyicong@hisilicon.com/

 drivers/pci/probe.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 17a969942d37..b108e72b6586 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2859,11 +2859,20 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
 	unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0;
 	unsigned int start = bus->busn_res.start;
 	unsigned int devfn, fn, cmax, max = start;
+	struct pci_dev *bridge = bus->self;
 	struct pci_dev *dev;
 	int nr_devs;
 
 	dev_dbg(&bus->dev, "scanning bus\n");
 
+	/*
+	 * Make sure the bus bridge is powered on, otherwise we may not be
+	 * able to scan the devices as we may fail to access the configuration
+	 * space of subordinates.
+	 */
+	if (bridge)
+		pm_runtime_get_sync(&bridge->dev);
+
 	/* Go find them, Rover! */
 	for (devfn = 0; devfn < 256; devfn += 8) {
 		nr_devs = pci_scan_slot(bus, devfn);
@@ -2976,6 +2985,9 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
 		}
 	}
 
+	if (bridge)
+		pm_runtime_put(&bridge->dev);
+
 	/*
 	 * We've scanned the bus and so we know all about what's on
 	 * the other side of any bridges that may be on this bus plus
-- 
2.24.0

Re: [PATCH v5] PCI: Make sure the bus bridge powered on when scanning bus

[Yicong Yang]

Hi Bjorn,

Any comment? Is it ok to take this?

Thanks.

On 2022/4/24 10:07, Yicong Yang wrote:
> When the bus bridge is runtime suspended, we'll fail to rescan
> the devices through sysfs as we cannot access the configuration
> space correctly when the bridge is in D3hot.
> It can be reproduced like:
> 
> $ echo 1 > /sys/bus/pci/devices/0000:80:00.0/0000:81:00.1/remove
> $ echo 1 > /sys/bus/pci/devices/0000:80:00.0/pci_bus/0000:81/rescan
> 
> 0000:80:00.0 is a Root Port and it is runtime-suspended, so
> 0000:81:00.1 is unreachable after a rescan.
> 
> Power up the bridge when scanning the child bus and allow it to
> suspend again by adding pm_runtime_get_sync()/pm_runtime_put()
> in pci_scan_child_bus_extend().
> 
> Cc: Rafael J. Wysocki <rafael@kernel.org>
> Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> Change since v4:
> - rephrase the commit suggested by Rafael
> Link: https://lore.kernel.org/lkml/20220422080404.27724-1-yangyicong@hisilicon.com/
> 
> Change since v3:
> - retain the pm_runtime_*() calls in pci_scan_bridge_extend() as Rafael points
>   out that it's necessary when the brigde is in D3cold
> Link: https://lore.kernel.org/linux-pci/20220414123736.34150-1-yangyicong@hisilicon.com/
> 
> Change since v2:
> - just rebase it on v5.18-rc2
> Link: https://lore.kernel.org/linux-pci/1601029386-4928-1-git-send-email-yangyicong@hisilicon.com/
> 
> Change since v1:
> - use an intermediate variable *bridge as suggested
> - remove the pm_runtime_*() calls in pci_scan_bridge_extend()
> Link: https://lore.kernel.org/linux-pci/1596022223-4765-1-git-send-email-yangyicong@hisilicon.com/
> 
>  drivers/pci/probe.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 17a969942d37..b108e72b6586 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -2859,11 +2859,20 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
>  	unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0;
>  	unsigned int start = bus->busn_res.start;
>  	unsigned int devfn, fn, cmax, max = start;
> +	struct pci_dev *bridge = bus->self;
>  	struct pci_dev *dev;
>  	int nr_devs;
>  
>  	dev_dbg(&bus->dev, "scanning bus\n");
>  
> +	/*
> +	 * Make sure the bus bridge is powered on, otherwise we may not be
> +	 * able to scan the devices as we may fail to access the configuration
> +	 * space of subordinates.
> +	 */
> +	if (bridge)
> +		pm_runtime_get_sync(&bridge->dev);
> +
>  	/* Go find them, Rover! */
>  	for (devfn = 0; devfn < 256; devfn += 8) {
>  		nr_devs = pci_scan_slot(bus, devfn);
> @@ -2976,6 +2985,9 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
>  		}
>  	}
>  
> +	if (bridge)
> +		pm_runtime_put(&bridge->dev);
> +
>  	/*
>  	 * We've scanned the bus and so we know all about what's on
>  	 * the other side of any bridges that may be on this bus plus
>