From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Alison Schofield <alison.schofield@intel.com>,
"Vishal Verma" <vishal.l.verma@intel.com>,
Ben Widawsky <ben.widawsky@intel.com>,
<linux-kernel@vger.kernel.org>, <linux-cxl@vger.kernel.org>,
<linux-pci@vger.kernel.org>
Subject: Re: [PATCH V8 07/10] cxl/mem: Read CDAT table
Date: Wed, 27 Apr 2022 18:55:02 +0100 [thread overview]
Message-ID: <20220427185502.00001fbf@Huawei.com> (raw)
In-Reply-To: <20220414203237.2198665-8-ira.weiny@intel.com>
On Thu, 14 Apr 2022 13:32:34 -0700
ira.weiny@intel.com wrote:
> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
> The OS will need CDAT data from CXL devices to properly set up
> interleave sets. Currently this is supported by a through a DOE mailbox
> which supports CDAT. But any cxl_mem object can provide this data later
> if need be, for example for testing.
>
> Cache the CDAT data for later parsing. Provide a sysfs binary attribute
> to allow dumping of the CDAT.
>
> Binary dumping is modeled on /sys/firmware/ACPI/tables/
>
> The ability to dump this table will be very useful for emulation of real
> devices once they become available as QEMU CXL type 3 device emulation will
> be able to load this file in.
>
> This does not support table updates at runtime. It will always provide
> whatever was there when first cached. Handling of table updates can be
> implemented later.
>
> Finally create a complete list of DOE defines within cdat.h for code
> wishing to decode the CDAT table.
>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Co-developed-by: Ira Weiny <ira.weiny@intel.com>
> Signed-off-by: Ira Weiny <ira.weiny@intel.com>
>
I'd have left the introduction of callbacks until they were actually needed,
but meh. That's minor.
On trivial below.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
...
> +
> +static int read_cdat_data(struct cxl_dev_state *cxlds)
> +{
> + struct device *dev = cxlds->dev;
> + size_t cdat_length;
> + int ret;
> +
> + if (cxl_mem_cdat_get_length(cxlds, &cdat_length))
> + return 0;
> +
> + cxlds->cdat.table = devm_kzalloc(dev, cdat_length, GFP_KERNEL);
> + if (!cxlds->cdat.table)
> + return -ENOMEM;
Trivial but blank line here.
> + cxlds->cdat.length = cdat_length;
> + ret = cxl_mem_cdat_read_table(cxlds, &cxlds->cdat);
> + if (ret) {
> + devm_kfree(dev, cxlds->cdat.table);
> + cxlds->cdat.table = NULL;
> + cxlds->cdat.length = 0;
> + }
> + return ret;
> +}
next prev parent reply other threads:[~2022-04-27 17:55 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-14 20:32 [PATCH V8 00/10] CXL: Read CDAT and DSMAS data from the device ira.weiny
2022-04-14 20:32 ` [PATCH V8 01/10] PCI: Add vendor ID for the PCI SIG ira.weiny
2022-04-14 20:32 ` [PATCH V8 02/10] PCI: Replace magic constant for PCI Sig Vendor ID ira.weiny
2022-04-14 20:32 ` [PATCH V8 03/10] PCI: Create PCI library functions in support of DOE mailboxes ira.weiny
2022-04-28 21:27 ` Bjorn Helgaas
2022-05-02 5:36 ` ira.weiny
2022-05-30 19:06 ` Lukas Wunner
2022-05-31 10:33 ` Jonathan Cameron
2022-06-01 2:59 ` Ira Weiny
2022-06-01 7:18 ` Lukas Wunner
2022-06-01 14:23 ` Jonathan Cameron
2022-06-01 17:16 ` Ira Weiny
2022-06-01 17:56 ` Lukas Wunner
2022-06-01 20:17 ` Ira Weiny
2022-06-06 14:46 ` Jonathan Cameron
2022-06-06 19:56 ` Ira Weiny
2022-06-07 9:58 ` Jonathan Cameron
2022-05-31 23:43 ` Ira Weiny
2022-04-14 20:32 ` [PATCH V8 04/10] cxl/pci: Create auxiliary devices for each DOE mailbox ira.weiny
2022-04-27 17:19 ` Jonathan Cameron
2022-04-28 21:09 ` ira.weiny
2022-04-29 16:38 ` Jonathan Cameron
2022-04-29 17:01 ` Dan Williams
2022-05-03 16:14 ` Jonathan Cameron
2022-04-29 15:55 ` Jonathan Cameron
2022-04-29 17:20 ` Ira Weiny
2022-05-03 15:32 ` Jonathan Cameron
2022-04-14 20:32 ` [PATCH V8 05/10] cxl/pci: Create DOE auxiliary driver ira.weiny
2022-04-27 17:43 ` Jonathan Cameron
2022-04-28 14:48 ` ira.weiny
2022-04-28 15:17 ` Jonathan Cameron
2022-04-14 20:32 ` [PATCH V8 06/10] cxl/pci: Find the DOE mailbox which supports CDAT ira.weiny
2022-04-27 17:49 ` Jonathan Cameron
2022-05-09 21:25 ` Ira Weiny
2022-04-14 20:32 ` [PATCH V8 07/10] cxl/mem: Read CDAT table ira.weiny
2022-04-27 17:55 ` Jonathan Cameron [this message]
2022-04-14 20:32 ` [PATCH V8 08/10] cxl/cdat: Introduce cxl_cdat_valid() ira.weiny
2022-04-27 17:56 ` Jonathan Cameron
2022-04-14 20:32 ` [PATCH V8 09/10] cxl/mem: Retry reading CDAT on failure ira.weiny
2022-04-27 17:57 ` Jonathan Cameron
2022-04-14 20:32 ` [PATCH V8 10/10] cxl/port: Parse out DSMAS data from CDAT table ira.weiny
2022-04-27 18:01 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220427185502.00001fbf@Huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=ben.widawsky@intel.com \
--cc=bhelgaas@google.com \
--cc=dan.j.williams@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).