From: Niklas Schnelle <schnelle@linux.ibm.com>
To: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
linux-pci@vger.kernel.org, Arnd Bergmann <arnd@kernel.org>,
Mathias Nyman <mathias.nyman@intel.com>,
Alan Stern <stern@rowland.harvard.edu>,
linux-usb@vger.kernel.org (open list:USB SUBSYSTEM)
Subject: [PATCH 36/37] usb: handle HAS_IOPORT dependencies
Date: Fri, 29 Apr 2022 15:51:03 +0200 [thread overview]
Message-ID: <20220429135108.2781579-66-schnelle@linux.ibm.com> (raw)
In-Reply-To: <20220429135108.2781579-1-schnelle@linux.ibm.com>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to guard sections of code calling them
as alternative access methods with CONFIG_HAS_IOPORT checks. Similarly
drivers requiring these functions need to depend on HAS_IOPORT.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
drivers/usb/core/hcd-pci.c | 3 +-
drivers/usb/host/Kconfig | 4 +-
drivers/usb/host/pci-quirks.c | 128 ++++++++++++++++++----------------
drivers/usb/host/pci-quirks.h | 33 ++++++---
drivers/usb/host/uhci-hcd.c | 2 +-
drivers/usb/host/uhci-hcd.h | 77 +++++++++++++-------
6 files changed, 149 insertions(+), 98 deletions(-)
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 8176bc81a635..50f1499a073e 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -212,7 +212,8 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id,
goto free_irq_vectors;
}
- hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
+ hcd->amd_resume_bug = (IS_ENABLED(CONFIG_USB_PCI_AMD) &&
+ usb_hcd_amd_remote_wakeup_quirk(dev) &&
driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
if (driver->flags & HCD_MEMORY) {
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 57ca5f97a3dc..cd1faa3174e3 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -369,7 +369,7 @@ config USB_ISP116X_HCD
config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
- depends on HAS_IOMEM
+ depends on HAS_IOPORT
depends on COMPILE_TEST # nothing uses this
help
Supports the Philips ISP1362 chip as a host controller
@@ -605,7 +605,7 @@ endif # USB_OHCI_HCD
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
- depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC
+ depends on (USB_PCI && HAS_IOPORT) || USB_UHCI_SUPPORT_NON_PCI_HC
help
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index ef08d68b9714..01471902c274 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -60,6 +60,23 @@
#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG 0xF8
+#define ASMT_DATA_WRITE1_REG 0xFC
+#define ASMT_CONTROL_REG 0xE0
+#define ASMT_CONTROL_WRITE_BIT 0x02
+#define ASMT_WRITEREG_CMD 0x10423
+#define ASMT_FLOWCTL_ADDR 0xFA30
+#define ASMT_FLOWCTL_DATA 0xBA
+#define ASMT_PSEUDO_DATA 0
+
+/* Intel quirk use */
+#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB2PRM 0xD4
+#define USB_INTEL_USB3_PSSEN 0xD8
+#define USB_INTEL_USB3PRM 0xDC
+
+#ifdef CONFIG_USB_PCI_AMD
/* AMD quirk use */
#define AB_REG_BAR_LOW 0xe0
#define AB_REG_BAR_HIGH 0xe1
@@ -93,21 +110,6 @@
#define NB_PIF0_PWRDOWN_0 0x01100012
#define NB_PIF0_PWRDOWN_1 0x01100013
-#define USB_INTEL_XUSB2PR 0xD0
-#define USB_INTEL_USB2PRM 0xD4
-#define USB_INTEL_USB3_PSSEN 0xD8
-#define USB_INTEL_USB3PRM 0xDC
-
-/* ASMEDIA quirk use */
-#define ASMT_DATA_WRITE0_REG 0xF8
-#define ASMT_DATA_WRITE1_REG 0xFC
-#define ASMT_CONTROL_REG 0xE0
-#define ASMT_CONTROL_WRITE_BIT 0x02
-#define ASMT_WRITEREG_CMD 0x10423
-#define ASMT_FLOWCTL_ADDR 0xFA30
-#define ASMT_FLOWCTL_DATA 0xBA
-#define ASMT_PSEUDO_DATA 0
-
/*
* amd_chipset_gen values represent AMD different chipset generations
*/
@@ -460,50 +462,6 @@ void usb_amd_quirk_pll_disable(void)
}
EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
-static int usb_asmedia_wait_write(struct pci_dev *pdev)
-{
- unsigned long retry_count;
- unsigned char value;
-
- for (retry_count = 1000; retry_count > 0; --retry_count) {
-
- pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
-
- if (value == 0xff) {
- dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
- return -EIO;
- }
-
- if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
- return 0;
-
- udelay(50);
- }
-
- dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
- return -ETIMEDOUT;
-}
-
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
-{
- if (usb_asmedia_wait_write(pdev) != 0)
- return;
-
- /* send command and address to device */
- pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
- pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
- pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-
- if (usb_asmedia_wait_write(pdev) != 0)
- return;
-
- /* send data to device */
- pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
- pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
- pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-}
-EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
-
void usb_amd_quirk_pll_enable(void)
{
usb_amd_quirk_pll(0);
@@ -632,7 +590,53 @@ bool usb_amd_pt_check_port(struct device *device, int port)
return !(value & BIT(port_shift));
}
EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+#endif
+
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+ unsigned long retry_count;
+ unsigned char value;
+
+ for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+ pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+ if (value == 0xff) {
+ dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+ return -EIO;
+ }
+
+ if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+ return 0;
+
+ udelay(50);
+ }
+
+ dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+ return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send command and address to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send data to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
+#if IS_ENABLED(CONFIG_USB_UHCI_HCD) && defined(CONFIG_HAS_IOPORT)
/*
* Make sure the controller is completely inactive, unable to
* generate interrupts or do DMA.
@@ -713,6 +717,7 @@ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
return 1;
}
EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+#endif
static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
{
@@ -728,7 +733,7 @@ static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
unsigned long base = 0;
int i;
- if (!pio_enabled(pdev))
+ if (!IS_ENABLED(CONFIG_HAS_IOPORT) || !pio_enabled(pdev))
return;
for (i = 0; i < PCI_STD_NUM_BARS; i++)
@@ -1273,7 +1278,8 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev)
"Can't enable PCI device, BIOS handoff failed.\n");
return;
}
- if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
+ if (IS_ENABLED(CONFIG_USB_UHCI_HCD) &&
+ pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
quirk_usb_handoff_uhci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
quirk_usb_handoff_ohci(pdev);
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index e729de21fad7..42eb18be37af 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -2,33 +2,50 @@
#ifndef __LINUX_USB_PCI_QUIRKS_H
#define __LINUX_USB_PCI_QUIRKS_H
-#ifdef CONFIG_USB_PCI
void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
+
+struct pci_dev;
+
+#ifdef CONFIG_USB_PCI_AMD
bool usb_amd_hang_symptom_quirk(void);
bool usb_amd_prefetch_quirk(void);
void usb_amd_dev_put(void);
bool usb_amd_quirk_pll_check(void);
void usb_amd_quirk_pll_disable(void);
void usb_amd_quirk_pll_enable(void);
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
-void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
-void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
void sb800_prefetch(struct device *dev, int on);
bool usb_amd_pt_check_port(struct device *device, int port);
#else
-struct pci_dev;
+static inline bool usb_amd_hang_symptom_quirk(void)
+{
+ return false;
+};
+static inline bool usb_amd_prefetch_quirk(void)
+{
+ return false;
+}
+static inline bool usb_amd_quirk_pll_check(void)
+{
+ return false;
+}
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
-static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
static inline void usb_amd_dev_put(void) {}
-static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
static inline void sb800_prefetch(struct device *dev, int on) {}
static inline bool usb_amd_pt_check_port(struct device *device, int port)
{
return false;
}
+#endif /* CONFIG_USB_PCI_AMD */
+
+#ifdef CONFIG_USB_PCI
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
+#else
+static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
#endif /* CONFIG_USB_PCI */
#endif /* __LINUX_USB_PCI_QUIRKS_H */
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index d90b869f5f40..a3b0d3d3b395 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -841,7 +841,7 @@ static int uhci_count_ports(struct usb_hcd *hcd)
static const char hcd_name[] = "uhci_hcd";
-#ifdef CONFIG_USB_PCI
+#if defined(CONFIG_USB_PCI) && defined(CONFIG_HAS_IOPORT)
#include "uhci-pci.c"
#define PCI_DRIVER uhci_pci_driver
#endif
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 8ae5ccd26753..8e30116b6fd2 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -586,12 +586,14 @@ static inline int uhci_aspeed_reg(unsigned int reg)
static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
{
+#ifdef CONFIG_HAS_IOPORT
if (uhci_has_pci_registers(uhci))
return inl(uhci->io_addr + reg);
- else if (uhci_is_aspeed(uhci))
+#endif
+ if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
- else if (uhci_big_endian_mmio(uhci))
+ if (uhci_big_endian_mmio(uhci))
return readl_be(uhci->regs + reg);
#endif
else
@@ -600,72 +602,97 @@ static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
{
- if (uhci_has_pci_registers(uhci))
+#ifdef CONFIG_HAS_IOPORT
+ if (uhci_has_pci_registers(uhci)) {
outl(val, uhci->io_addr + reg);
- else if (uhci_is_aspeed(uhci))
+ return;
+ }
+#endif
+ if (uhci_is_aspeed(uhci)) {
writel(val, uhci->regs + uhci_aspeed_reg(reg));
+ return;
+ }
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
- else if (uhci_big_endian_mmio(uhci))
+ if (uhci_big_endian_mmio(uhci)) {
writel_be(val, uhci->regs + reg);
+ return;
+ }
#endif
- else
- writel(val, uhci->regs + reg);
+ writel(val, uhci->regs + reg);
}
static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
{
+#ifdef CONFIG_HAS_IOPORT
if (uhci_has_pci_registers(uhci))
return inw(uhci->io_addr + reg);
- else if (uhci_is_aspeed(uhci))
+#endif
+ if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
- else if (uhci_big_endian_mmio(uhci))
+ if (uhci_big_endian_mmio(uhci))
return readw_be(uhci->regs + reg);
#endif
- else
- return readw(uhci->regs + reg);
+ return readw(uhci->regs + reg);
}
static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
{
- if (uhci_has_pci_registers(uhci))
+#ifdef CONFIG_HAS_IOPORT
+ if (uhci_has_pci_registers(uhci)) {
outw(val, uhci->io_addr + reg);
- else if (uhci_is_aspeed(uhci))
+ return;
+ }
+#endif
+ if (uhci_is_aspeed(uhci)) {
writel(val, uhci->regs + uhci_aspeed_reg(reg));
+ return;
+ }
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
- else if (uhci_big_endian_mmio(uhci))
+ if (uhci_big_endian_mmio(uhci)) {
writew_be(val, uhci->regs + reg);
+ return;
+ }
#endif
- else
- writew(val, uhci->regs + reg);
+
+ writew(val, uhci->regs + reg);
}
static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
{
+#ifdef CONFIG_HAS_IOPORT
if (uhci_has_pci_registers(uhci))
return inb(uhci->io_addr + reg);
- else if (uhci_is_aspeed(uhci))
+#endif
+ if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
- else if (uhci_big_endian_mmio(uhci))
+ if (uhci_big_endian_mmio(uhci))
return readb_be(uhci->regs + reg);
#endif
- else
- return readb(uhci->regs + reg);
+
+ return readb(uhci->regs + reg);
}
static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
{
- if (uhci_has_pci_registers(uhci))
+#ifdef CONFIG_HAS_IOPORT
+ if (uhci_has_pci_registers(uhci)) {
outb(val, uhci->io_addr + reg);
- else if (uhci_is_aspeed(uhci))
+ return;
+ }
+#endif
+ if (uhci_is_aspeed(uhci)) {
writel(val, uhci->regs + uhci_aspeed_reg(reg));
+ return;
+ }
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
- else if (uhci_big_endian_mmio(uhci))
+ if (uhci_big_endian_mmio(uhci)) {
writeb_be(val, uhci->regs + reg);
+ return;
+ }
#endif
- else
- writeb(val, uhci->regs + reg);
+ writeb(val, uhci->regs + reg);
}
#endif /* CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC */
--
2.32.0
next prev parent reply other threads:[~2022-04-29 13:54 UTC|newest]
Thread overview: 196+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-29 13:49 [RFC v2 00/39] Kconfig: Introduce HAS_IOPORT config option Niklas Schnelle
2022-04-29 13:49 ` [RFC v2 01/39] Kconfig: introduce HAS_IOPORT option and select it as necessary Niklas Schnelle
2022-05-01 22:40 ` Maciej W. Rozycki
2022-05-04 21:08 ` Bjorn Helgaas
2022-05-04 21:31 ` Arnd Bergmann
2022-05-05 8:10 ` Niklas Schnelle
2022-05-05 16:10 ` Bjorn Helgaas
2022-05-05 17:39 ` Arnd Bergmann
2022-05-05 19:53 ` Bjorn Helgaas
2022-05-06 9:12 ` Finn Thain
2022-05-06 11:18 ` Niklas Schnelle
2022-05-07 0:01 ` Finn Thain
2022-05-07 13:14 ` Arnd Bergmann
2022-05-07 23:59 ` Finn Thain
2022-05-08 0:15 ` Finn Thain
2022-05-06 9:38 ` Niklas Schnelle
2022-05-06 11:07 ` John Garry
2022-05-06 10:20 ` Maciej W. Rozycki
2022-05-06 11:33 ` Arnd Bergmann
2022-05-06 12:27 ` Maciej W. Rozycki
2022-05-06 12:53 ` David Laight
2022-05-06 13:08 ` Geert Uytterhoeven
2022-05-06 13:40 ` Maciej W. Rozycki
2022-05-06 14:03 ` David Laight
2022-05-06 15:02 ` Geert Uytterhoeven
2022-05-06 13:15 ` Maciej W. Rozycki
2022-05-06 13:28 ` David Laight
2022-05-06 14:44 ` Maciej W. Rozycki
2022-05-06 14:56 ` Geert Uytterhoeven
2022-05-06 15:03 ` Maciej W. Rozycki
2022-05-06 12:53 ` Arnd Bergmann
2022-05-06 13:15 ` Niklas Schnelle
2022-05-06 13:16 ` Maciej W. Rozycki
2022-05-06 12:55 ` Niklas Schnelle
2022-05-06 12:42 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 02/39] ACPI: add dependency on HAS_IOPORT Niklas Schnelle
2022-05-04 13:23 ` Rafael J. Wysocki
2022-05-04 17:53 ` Bjorn Helgaas
2022-05-04 19:58 ` Arnd Bergmann
2022-05-05 8:20 ` Niklas Schnelle
2022-05-05 19:36 ` Bjorn Helgaas
2022-04-29 13:50 ` [PATCH 02/37] ata: add HAS_IOPORT dependencies Niklas Schnelle
2022-04-29 14:27 ` Niklas Schnelle
2022-04-29 13:50 ` [PATCH 03/37] ACPI: add dependency on HAS_IOPORT Niklas Schnelle
2022-04-29 14:28 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 03/39] ata: add HAS_IOPORT dependencies Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 04/39] char: impi, tpm: depend on HAS_IOPORT Niklas Schnelle
2022-04-29 14:23 ` Niklas Schnelle
2022-04-29 14:33 ` Ahmad Fatoum
2022-05-02 14:34 ` Niklas Schnelle
2022-04-29 13:50 ` [PATCH 04/37] parport: PC style parport depends " Niklas Schnelle
2022-04-29 14:28 ` Niklas Schnelle
2022-04-29 13:50 ` [PATCH 05/37] char: impi, tpm: depend " Niklas Schnelle
2022-04-29 14:02 ` Ahmad Fatoum
2022-04-29 13:50 ` [RFC v2 05/39] comedi: add HAS_IOPORT dependencies Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 06/39] counter: " Niklas Schnelle
2022-04-29 13:50 ` [PATCH 06/37] speakup: add HAS_IOPORT dependency for SPEAKUP_SERIALIO Niklas Schnelle
2022-04-29 14:28 ` Samuel Thibault
2022-04-29 14:28 ` Niklas Schnelle
2022-04-29 14:29 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 07/39] /dev/port: don't compile file operations without CONFIG_DEVPORT Niklas Schnelle
2022-04-29 13:50 ` [PATCH 07/37] Input: gameport: add ISA and HAS_IOPORT dependencies Niklas Schnelle
2022-04-29 14:29 ` Niklas Schnelle
2022-04-29 13:50 ` [PATCH 08/37] comedi: add " Niklas Schnelle
2022-04-29 14:30 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 08/39] drm: handle " Niklas Schnelle
2022-04-29 13:50 ` [PATCH 09/37] counter: add " Niklas Schnelle
2022-04-29 14:30 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 09/39] firmware: dmi-sysfs: handle HAS_IOPORT=n Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 10/39] gpio: add HAS_IOPORT dependencies Niklas Schnelle
2022-04-29 14:32 ` William Breathitt Gray
2022-04-29 14:46 ` Niklas Schnelle
2022-04-29 15:37 ` William Breathitt Gray
2022-05-01 21:55 ` Linus Walleij
2022-05-02 12:53 ` Niklas Schnelle
2022-05-03 13:08 ` David Laight
2022-05-03 14:03 ` William Breathitt Gray
2022-05-04 11:46 ` Maciej W. Rozycki
2022-05-04 12:45 ` David Laight
2022-05-04 13:02 ` Maciej W. Rozycki
2022-05-02 13:21 ` Maciej W. Rozycki
2022-04-29 13:50 ` [RFC v2 11/39] hwmon: " Niklas Schnelle
2022-04-30 0:37 ` Guenter Roeck
2022-04-29 13:50 ` [PATCH 11/37] sound: " Niklas Schnelle
2022-04-29 14:30 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 12/39] i2c: " Niklas Schnelle
2022-05-14 14:06 ` Wolfram Sang
2022-04-29 13:50 ` [RFC v2 13/39] iio: adc: Kconfig: " Niklas Schnelle
2022-05-01 16:51 ` Jonathan Cameron
2022-04-29 13:50 ` [PATCH 13/37] Input: " Niklas Schnelle
2022-04-29 14:31 ` Niklas Schnelle
2022-04-29 13:50 ` [PATCH 14/37] iio: adc: Kconfig: " Niklas Schnelle
2022-04-29 14:31 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 14/39] Input: " Niklas Schnelle
2022-04-29 13:50 ` [PATCH 15/37] hwmon: " Niklas Schnelle
2022-04-29 14:31 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 15/39] Input: gameport: add ISA and " Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 16/39] leds: add " Niklas Schnelle
2022-04-29 18:54 ` Pavel Machek
2022-05-02 8:31 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 17/39] media: " Niklas Schnelle
2022-04-29 15:36 ` Sean Young
2022-04-29 13:50 ` [RFC v2 18/39] misc: " Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 19/39] mISDN: " Niklas Schnelle
2022-04-29 13:50 ` [PATCH 19/37] mpt fusion: " Niklas Schnelle
2022-04-29 14:32 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 20/39] " Niklas Schnelle
2022-04-29 13:50 ` [PATCH 20/37] net: " Niklas Schnelle
2022-04-29 14:33 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 21/39] " Niklas Schnelle
2022-04-29 14:13 ` Marc Kleine-Budde
2022-05-01 22:48 ` Maciej W. Rozycki
2022-05-03 12:45 ` Niklas Schnelle
2022-05-03 13:36 ` Maciej W. Rozycki
2022-04-29 13:50 ` [PATCH 21/37] pcmcia: " Niklas Schnelle
2022-04-29 14:33 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 22/39] parport: PC style parport depends on HAS_IOPORT Niklas Schnelle
2022-04-29 13:50 ` [PATCH 22/37] platform: add HAS_IOPORT dependencies Niklas Schnelle
2022-04-29 14:33 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 23/39] PCI: make quirk using inw() depend on HAS_IOPORT Niklas Schnelle
2022-06-08 18:30 ` Bjorn Helgaas
2022-04-29 13:50 ` [PATCH 23/37] pnp: add HAS_IOPORT dependencies Niklas Schnelle
2022-04-29 14:34 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 24/39] PCI/sysfs: make I/O resource depend on HAS_IOPORT Niklas Schnelle
2022-06-08 18:32 ` Bjorn Helgaas
2022-04-29 13:50 ` [PATCH 24/37] power: add HAS_IOPORT dependencies Niklas Schnelle
2022-04-29 14:34 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 25/39] pcmcia: " Niklas Schnelle
2022-05-03 23:38 ` Bjorn Helgaas
2022-05-04 10:33 ` Arnd Bergmann
2022-05-04 12:38 ` Maciej W. Rozycki
2022-05-04 14:07 ` Arnd Bergmann
2022-05-04 14:24 ` Maciej W. Rozycki
2022-05-04 17:22 ` Bjorn Helgaas
2022-05-05 8:45 ` Maciej W. Rozycki
2022-05-05 19:38 ` Bjorn Helgaas
2022-05-04 14:44 ` David Laight
2022-05-05 12:03 ` Maciej W. Rozycki
2022-05-04 14:59 ` Niklas Schnelle
2022-04-29 13:50 ` [PATCH 25/37] video: handle " Niklas Schnelle
2022-04-29 14:35 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 26/39] platform: add " Niklas Schnelle
2022-04-29 13:50 ` [PATCH 26/37] rtc: " Niklas Schnelle
2022-04-29 14:46 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 27/39] pnp: " Niklas Schnelle
2022-04-29 13:50 ` [PATCH 27/37] scsi: " Niklas Schnelle
2022-04-29 14:46 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 28/39] power: " Niklas Schnelle
2022-04-29 13:50 ` [PATCH 28/37] staging: sm750fb: " Niklas Schnelle
2022-04-29 14:47 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 29/39] rtc: " Niklas Schnelle
2022-05-17 22:15 ` Alexandre Belloni
2022-05-18 13:47 ` Niklas Schnelle
2022-06-01 12:25 ` Maciej W. Rozycki
2022-04-29 13:50 ` [PATCH 29/37] tty: serial: " Niklas Schnelle
2022-04-29 14:47 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 30/39] scsi: " Niklas Schnelle
2022-05-04 20:42 ` Bjorn Helgaas
2022-05-04 21:34 ` Arnd Bergmann
2022-05-05 16:06 ` Bjorn Helgaas
2022-04-29 13:50 ` [PATCH 30/37] watchdog: " Niklas Schnelle
2022-04-29 14:47 ` Niklas Schnelle
2022-04-29 13:50 ` [PATCH 31/37] drm: handle " Niklas Schnelle
2022-04-29 14:47 ` Niklas Schnelle
2022-04-29 13:50 ` [RFC v2 31/39] sound: add " Niklas Schnelle
2022-05-09 8:53 ` Takashi Iwai
2022-05-09 9:20 ` Arnd Bergmann
2022-05-09 10:07 ` Takashi Iwai
2022-05-09 12:14 ` Niklas Schnelle
2022-04-29 13:50 ` [PATCH 32/37] PCI/sysfs: make I/O resource depend on HAS_IOPORT Niklas Schnelle
2022-04-29 14:48 ` Niklas Schnelle
2022-05-05 21:41 ` Bjorn Helgaas
2022-04-29 13:50 ` [RFC v2 32/39] speakup: add HAS_IOPORT dependency for SPEAKUP_SERIALIO Niklas Schnelle
2022-04-29 13:50 ` [PATCH 33/37] PCI: make quirk using inw() depend on HAS_IOPORT Niklas Schnelle
2022-04-29 14:48 ` Niklas Schnelle
2022-05-05 21:44 ` Bjorn Helgaas
2022-04-29 13:50 ` [RFC v2 33/39] staging: add HAS_IOPORT dependencies Niklas Schnelle
2022-04-29 13:50 ` [PATCH 34/37] firmware: dmi-sysfs: handle HAS_IOPORT=n Niklas Schnelle
2022-04-29 14:48 ` Niklas Schnelle
2022-04-29 13:51 ` [RFC v2 34/39] tty: serial: add HAS_IOPORT dependencies Niklas Schnelle
2022-05-02 9:15 ` Maciej W. Rozycki
2022-04-29 13:51 ` [PATCH 35/37] /dev/port: don't compile file operations without CONFIG_DEVPORT Niklas Schnelle
2022-04-29 14:49 ` Niklas Schnelle
2022-04-29 13:51 ` [RFC v2 35/39] usb: handle HAS_IOPORT dependencies Niklas Schnelle
2022-04-30 12:56 ` Alan Stern
2022-05-02 8:26 ` Niklas Schnelle
2022-04-29 13:51 ` Niklas Schnelle [this message]
2022-04-29 14:49 ` [PATCH 36/37] " Niklas Schnelle
2022-04-29 13:51 ` [RFC v2 36/39] video: " Niklas Schnelle
2022-04-29 13:51 ` [PATCH 37/37] asm-generic/io.h: drop inb() etc for HAS_IOPORT=n Niklas Schnelle
2022-04-29 14:49 ` Niklas Schnelle
2022-04-29 13:51 ` [RFC v2 37/39] watchdog: add HAS_IOPORT dependencies Niklas Schnelle
2022-04-30 0:38 ` Guenter Roeck
2022-04-29 13:51 ` [RFC v2 38/39] wireless: " Niklas Schnelle
2022-04-29 14:40 ` Kalle Valo
2022-04-29 13:51 ` [RFC v2 39/39] asm-generic/io.h: drop inb() etc for HAS_IOPORT=n Niklas Schnelle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220429135108.2781579-66-schnelle@linux.ibm.com \
--to=schnelle@linux.ibm.com \
--cc=arnd@arndb.de \
--cc=arnd@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).