archive mirror
 help / color / mirror / Atom feed
From: Nirmal Patel <>
To: <>
Cc: Nirmal Patel <>
Subject: [PATCH 1/2] PCI: vmd: Assign VMD IRQ domain before enumeration
Date: Mon,  2 May 2022 01:48:59 -0700	[thread overview]
Message-ID: <> (raw)
In-Reply-To: <>

VMD creates and assigns a separate IRQ domain when MSI-X remapping is
enabled. For example VMD-MSI. But VMD doesn't assign IRQ domain when
MSI-X remapping is disabled resulting child devices getting default
PCI-MSI IRQ domain. Now when interrupt remapping is enabled by
intel-iommu all the PCI devices are assigned INTEL-IR-MSI domain
including VMD endpoints. But devices behind VMD get PCI-MSI IRQ domain
when VMD create a root bus and configures child devices.

As a result DMAR errors were observed when interrupt remapping was
enabled on Intel Icelake CPUs. For instance:

  DMAR: DRHD: handling fault status reg 2
  DMAR: [INTR-REMAP] Request device [0xe2:0x00.0] fault index 0xa00 [fault reason 0x25] Blocked a compatibility format interrupt request

Signed-off-by: Nirmal Patel <>
 drivers/pci/controller/vmd.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index eb05cceab964..5015adc04d19 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -853,6 +853,9 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
 	if (vmd->irq_domain)
 		dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
+	else
+		dev_set_msi_domain(&vmd->bus->dev,
+				   dev_get_msi_domain(&vmd->dev->dev));

  reply	other threads:[~2022-05-02 15:55 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-02  8:48 [PATCH 0/2] PCI: vmd: IRQ domain assignment to sub devices Nirmal Patel
2022-05-02  8:48 ` Nirmal Patel [this message]
2022-05-11  9:10   ` [PATCH 1/2] PCI: vmd: Assign VMD IRQ domain before enumeration Lorenzo Pieralisi
2022-05-11 16:57     ` Patel, Nirmal
2022-05-02  8:49 ` [PATCH 2/2] PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.") Nirmal Patel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).